PA-1600-32SL-LF

ClassⅡ 63W LED Controlgear : PA-1600-32 Series Product Features • Universal AC Input • High Power Factor • Low Total Harmonic Distortion • Short Circuit / Open Circuit / Over Voltage / Over Temperature Protections • Suitable for Dry & Damp Location • IP66 Waterproof Grade • Adjustable Output Current by Dimming Input • RoHS Compliant AC Input / DC Output • AC Input Voltage • AC Input Frequency • Max. Input Current @ 110Vac (60Hz) • Min. PF @ 230Vac (50Hz) / 90V Output • Min. PF @ 230Vac (50Hz) / 63V Output (70% load) • Min. PF @ 240Vac (60Hz) / Output > 40W • Max. THD @ 110~277Vac / 90V Output • Min. Eff. @ 220Vac (50Hz) / 90V Output • Turn On Delay Time • DC Output Current • Line Regulation • Load Regulation • DC Output Voltage Range • Ripple Current • DC Output Isolation EMC 100 ~ 305Vac (110 ~ 277Vac) 47 ~ 63Hz (50~60Hz) 1.0A 0.95 0.92 0.9 20% 90% 20MΩ , 500Vdc • Complied with IEC 61347-2-13:2006 • Complied with IEC 61347-1(Second Edition):2007+A1:2010 • Complied with IEC 62384:2006(1 Edition) • Complied with CE • Support 2 in 1 Dimming Function • Resistor Dimming Range (10~100K) • Voltage Dimming Range (1~10V) • Resistor Dimming Reference Table Resistor Dimming 75KΩ ±1% Output Current 540mA ±10% Tolerance • Voltage Dimming Reference Table Voltage Dimming 7.7V Output Current 540mA ±10% Tolerance 43KΩ ±1% 330mA ±10% 5V 350mA ±10% Notes : (1) above definition is based on 25℃ ambient if not specified (2) this LED driver is designed and intended for operating with LED load only (3) the condition of E-cap life evaluation are 110Vac/60Hz or 230Vac/50Hz @ max. load & 25℃ ambient (4) MTBF evaluation is based on SR-332 method, 115Vac/60Hz, max. load (5) to measure efficiency after burn-in 30 minutes with full output load (6) recommend to install the controlgear inside the enclosure www.liteon.com Revised on 2015.03.26 (SL) Ver. D ClassⅡ 63W LED Controlgear : PA-1600-32 Series Performance Curves • Power Factor (PF / Output Power) • THD (THD / Output Power) PF PF 1.00 THD THD 30.00% 25.00% 0.95 20.00% 0.90 0.85 0.80 120Vac 15.00% 120Vac 240Vac 10.00% 240Vac 277Vac 5.00% 277Vac 0.00% 0.75 Output Power(%) Output Power(%) • Efficiency (Eff. / Output Power) • Output Current Tolerance (Tolerance / Output Power) Efficiency Eff. Tolerance 92.00% 5.00% 90.00% 3.00% 88.00% Output Current Tolerance 1.00% 86.00% 120Vac 84.00% 240Vac -1.00% 82.00% 277Vac -3.00% 80.00% 120Vac 240Vac 277Vac -5.00% Output Power(%) • PF>0.9 & THD0.9 & THD0.9、THD0.9、THD0.9 & THD0.9、THD