SMA8.2

LITE-ON SEMICONDUCTOR SMA SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 400 WATTS SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMA SMA A B C DIM. A B C D E F F D G H MIN. 4.06 2.29 1.27 0.15 4.83 0.05 2.01 0.76 MAX. 4.57 2.92 1.63 0.31 5.59 0.20 2.62 1.52 G MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.002 ounces, 0.064 grams H E A ll Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS PEAK POWER DISSIPATION AT TA = 25 C, TP = 1ms (Note 1,2) Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 3) (JEDEC METHOD) SYMBOLS VALUE UNIT PPK Minimum 400 WATTS IFSM 40 AMPS. Steady State Power Dissipation at TL =75 C PM(AV) 1.0 WATTS Maximum Instantaneous forward voltage at 35A for unidirectional devices only (Note 3) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 C Storage Temperature Range TSTG -55 to +175 C NOTES : 1. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 C per fig.1. REV. 2, 01-Dec-2000, KSIA01 2. Thermal Resistance junction to Lead 3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only). RATING AND CHARACTERISTIC CURVES SMA SERIES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 60 50 40 30 20 10 0 1 2 5 10 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 75 50 25 10 X 1000 WAVEFORM AS DEFINED BY R.E.A. 0 0 25 50 75 100 125 150 175 200 20 50 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - PULSE WAVEFORM TR=10us 10000 FIG.4 - TYPICAL JUNCTION CAPACITANCE IP, PEAK PULSE CURRENT , (% ) 100 P eak value (IRSM) Half value= IRSM 2 CAPACITANCE , (pF) Uni-directional Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM 50 1000 TJ = 25 C Bi-directional TP 10 x 1000 waveform as defined by R.E.A. 100 TJ=25 C 0 0 1.0 2.0 3.0 4.0 10 1 10 100 1000 T , TIME ( ms ) STAND-OFF VOLTAGE, VOLTS FIG.5 - PULSE RATING CURVE 100 TA=150 C FIG.6 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION (W) 1.0 PP, PEAK POWER ( KW ) 0.8 10 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG 3. 0.6 0.4 1.0 5.0mm LEAD AREAS 0.2 60Hz RESISTIVE OR INDUCTIVE LOAD 0.1 0.1us 1.0us 10us 100us 1.0ms 10ms 0.0 0 25 50 75 100 125 150 175 200 TP, PULSE WIDTH TL, LEAD TEMPERATURE REV. 2, 01-Dec-2000, KSIA01 LITE-ON SEMICONDUCTOR Maximum Reverse Leakage at VRWM IR (uA) 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 Device Unidirectional Device Bidirectional Device Marking code Breakdowm voltage VBR Volts Working PeakReverse Voltage VRWM(Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 Maximum Reverse Surge Current IRSM(Amps) 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.8 26.7 27.6 24.7 25.6 23.1 23.9 21.0 22.0 18.2 18.7 17.0 17.8 15.1 15.7 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 (UNI) SMA6.8 SMA6.8A SMA7.5 SMA7.5A SMA8.2 SMA8.2A SMA9.1 SMA9.1A SMA10 SMA10A SMA11 SMA11A SMA12 SMA12A SMA13 SMA13A SMA15 SMA15A SMA16 SMA16A SMA18 SMA18A SMA20 SMA20A SMA22 SMA22A SMA24 SMA24A SMA27 SMA27A SMA30 SMA30A SMA33 SMA33A SMA36 SMA36A SMA39 SMA39A SMA43 SMA43A SMA6.8C SMA6.8CA SMA7.5C SMA7.5CA SMA8.2C SMA8.2CA SMA9.1C SMA9.1CA SMA10C SMA10CA SMA11C SMA11CA SMA12C SMA12CA SMA13C SMA13CA SMA15C SMA15CA SMA16C SMA16CA SMA18C SMA18CA SMA20C SMA20CA SMA22C SMA22CA SMA24C SMA24CA SMA27C SMA27CA SMA30C SMA30CA SMA33C SMA33CA SMA36C SMA36CA SMA39C SMA39CA SMA43C SMA43CA ADK AEK AFK AGK AHK AKK ALK (BI) ADM AEM AFM AGM AHM AKM ALM Min. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 Max. 7.48 7.13 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 @IT( mA) 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 AMK AMM ANK APK AQK ARK ASK ATK AUK AVK ANM APM AQM ARM ASM ATM AUM AVM AWK AWM AXK AYK AZK BDK BEK BFK BGK BHK BKK BLK AXM AYM AZM BDM BEM BFM BGM BHM BKM BLM BMK BMM BNK BPK BQK BRK BSK BTK BUK BVK BNM BPM BQM BRM BSM BTM BUM BVM BWK BWM BXK BYK BZK BXM BYM BZM Device Unidirectional Device Bidirectional Device Marking code Breakdowm voltage VBR Volts Working PeakReverse Voltage VRWM(Volts) 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 Maximum Reverse Leakage at VRWM IR (uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Surge Current IRSM(Amps) 5.90 6.17 5.44 5.71 4.97 5.19 4.49 4.71 4.08 4.35 3.70 3.88 3.39 3.54 3.05 3.20 2.78 2.92 2.53 2.63 2.31 2.42 2.14 2.23 1.86 1.93 1.74 1.83 1.64 1.71 1.55 1.63 1.39 1.46 Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 (UNI) SMA47 SMA47A SMA51 SMA51A SMA56 SMA56A SMA62 SMA62A SMA68 SMA68A SMA75 SMA75A SMA82 SMA82A SMA91 SMA91A SMA100 SMA100A SMA110 SMA110A SMA120 SMA120A SMA130 SMA130A SMA150 SMA150A SMA160 SMA160A SMA170 SMA170A SMA180 SMA180A SMA200 SMA200A NOTE : SMA47C SMA47CA SMA45C SMA45CA SMA56C SMA56CA SMA62C SMA62CA SMA68C SMA68CA SMA75C SMA75CA SMA82C SMA82CA SMA91C SMA91CA SMA100C SMA100CA SMA110C SMA110CA SMA120C SMA120CA SMA130C SMA130CA SMA150C SMA150CA SMA160C SMA160CA SMA170C SMA170CA SMA180C SMA180CA SMA200C SMA200CA CDK CEK CFK CGK CHK CKK CLK (BI) CDM CEM CFM CGM CHM CKM CLM Min. 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.8 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 Max. 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.0 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 @IT( mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 CMK CMM CNK CPK CQK CRK CSK CTK CUK CVK CNM CPM CQM CRM CSM CTM CUM CVM CWK CWM CXK CYK CZK RDK REK RFK RGK RHK RKK RLK CXM CYM CZM RDM REM RFM RGM RHM RKM RLM RMK RMM RNK RPK RQK RRK RSK RTK RNM RPM RQM RRM RSM RTM 1) Suffix 'A ' denotes 5% tolerance device,no suffix denotes 10 % tolerance device. 2) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . 4) For Uni-directional devices VF max=3.5v at if=35 A ,0.5 sine wave of 8.3 msec .pulse width.