SMB20

LITE ON POWER SEMICONDUCTOR SMB SERIES STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 600 WATTS SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMB SMB A DIM. A B B C C D E G F F E D G H MIN. 4.06 3.30 1.96 0.15 5.21 0.05 2.01 0.76 MAX. 4.57 3.94 2.21 0.31 5.59 0.20 2.62 1.52 MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.003 ounces, 0.093 gram H A ll Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS PEAK POWER DISSIPATION AT TA = 25 C, TP = 1ms (Note 1,2) Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 3) (JEDEC METHOD) Steady State Power Dissipation at T L =75 C SYMBOLS VALUE UNIT PPK Minimum 600 WATTS IFSM 100 AMPS. PM(AV) 5.0 WATTS Maximum Instantaneous forward voltage at 50A for unidirectional devices only (Note 3) VF SEE NOTE 4 Volts Operating Temperature Range TJ -55 to +150 C Storage Temperature Range TSTG -55 to +175 C REV. 1, 24-May-2000 NOTES : 1. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 C per fig.1. 2. Thermal Resistance junction to Lead 3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only). 4. VF= 3.5V on SMB6.8 thru SMB90A devices and VF= 5.0V on SMB100 thru SMB200A devices. RATING AND CHARACTERISTIC CURVES SMB SERIES LITE ON PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - PULSE DERATING CURVE PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 100 80 60 40 20 0 1 2 5 10 20 50 100 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 75 50 25 10 X 1000 WAVEFORM AS DEFINED BY R.E.A. 0 0 25 50 75 100 125 150 175 200 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - PULSE WAVEFORM TR=10us 10000 FIG.4 - TYPICAL JUNCTION CAPACITANCE IPPEAK PULSE CURRENT , (%) 100 Peak value (IRSM) H alf value= 2 CAPACITANCE , (pF) IRSM Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM Uni-directional TJ = 25 C 1000 Bi-directional 50 TJ=25 C 10 x 1000 waveform as defined by R.E.A. 100 TP 0 0 1.0 2.0 3.0 4.0 10 1 10 100 1000 T, TIME ( ms ) STAND-OFF VOLTAGE, VOLTS 100 TA=150 C PM(AV) STEADY STATE POWER DISSIPATION (W) FIG.5 - PULSE RATING CURVE FIG.6 - STEADY STATE POWER DERATING CURVE 5.0 PP, PEAK POWER ( KW ) 4.0 10 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG 3. 3.0 2.0 1.0 5.0mm LEAD AREAS 1.0 60Hz RESISTIVE OR INDUCTIVE LOAD 0.1 0.1us 1.0us 10us 100us 1.0ms 10ms 0.0 0 25 50 75 100 125 150 175 200 TP, PULSE WIDTH TL, LEAD TEMPERATURE REV. 1, 24-May-2000 LITE ON Device Unidirectional Device Bidirectional POWER SEMICONDUCTOR Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 Device Marking code Breakdowm voltage VBR Volts Working PeakReverse Voltage VRWM(Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 Maximum Reverse Leakage at VRWM IR (uA) 1000 1000 500 500 200 200 50.0 50.0 20.0 20.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Surge Current IRSM(Amps) 55.6 57.1 51.3 53.1 48.0 49.6 44.0 44.8 40.0 41.4 37.0 38.5 34.7 35.9 31.6 33.0 27.3 28.3 25.5 26.7 22.6 23.5 20.6 21.7 18.8 19.6 17.3 18.1 15.3 16.0 13.8 14.4 12.6 13.2 11.6 12.0 10.6 11.2 9.6 10.1 (UNI) SMB6.8 SMB6.8A SMB7.5 SMB7.5A SMB8.2 SMB8.2A SMB9.1 SMB9.1A SMB10 SMB10A SMB11 SMB11A SMB12 SMB12A SMB13 SMB13A SMB15 SMB15A SMB16 SMB16A SMB18 SMB18A SMB20 SMB20A SMB22 SMB22A SMB24 SMB24A SMB27 SMB27A SMB30 SMB30A SMB33 SMB33A SMB36 SMB36A SMB39 SMB39A SMB43 SMB43A SMB6.8C SMB6.8CA SMB7.5C SMB7.5CA SMB8.2C SMB8.2CA SMB9.1C SMB9.1CA SMB10C SMB10CA SMB11C SMB11CA SMB12C SMB12CA SMB13C SMB13CA SMB15C SMB15CA SMB16C SMB16CA SMB18C SMB18CA SMB20C SMB20CA SMB22C SMB22CA SMB24C SMB24CA SMB27C SMB27CA SMB30C SMB30CA SMB33C SMB33CA SMB36C SMB36CA SMB39C SMB39CA SMB43C SMB43CA (BI) Min. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 Max. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.3 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 @IT( mA) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 KDK KDM KEK KEM KFK KFM KGK KGM KHK KHM KKK KKM KLK KLM KMK KMM KNK KNM KPK KPM KQK KQM KRK KRM KSK KSM KTK KTM KUK KUM KVK KVM KWK KWM KXK KXM KYK KYM KZK KZM LDK LEK LFK LGK LDM LEM LFM LGM LHK LHM LKK LKM LLK LLM LMK LMM LNK LPK LQK LRK LSK LTK LUK LVK LNM LPM LQM LRM LSM LTM LUM LVM LWK LWM LXK LYK LZK LXM LYM LZM LITE ON Device Unidirectional Device Bidirectional Device Marking code Breakdowm voltage VBR Volts Working PeakReverse Voltage VRWM(Volts) 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 Maximum Reverse Leakage at VRWM IR (uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Surge Current IRSM(Amps) 8.85 9.26 8.16 8.56 7.45 7.79 6.74 7.06 6.12 6.52 5.56 5.83 5.08 5.31 4.58 4.80 4.17 4.38 3.80 3.95 3.47 3.64 3.21 3.35 2.79 2.90 2.61 2.74 2.46 2.56 2.33 2.44 2.09 2.19 Maximum Reverse Voltage at IRSM (Clamping Voltage) VRSM(Volts) 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 (UNI) SMB47 SMB47A SMB51 SMB51A SMB56 SMB56A SMB62 SMB62A SMB68 SMB68A SMB75 SMB75A SMB82 SMB82A SMB91 SMB91A SMB100 SMB100A SMB110 SMB110A SMB120 SMB120A SMB130 SMB130A SMB150 SMB150A SMB160 SMB160A SMB170 SMB170A SMB180 SMB180A SMB200 SMB200A NOTE : SMB47C SMB47CA SMB45C SMB45CA SMB56C SMB56CA SMB62C SMB62CA SMB68C SMB68CA SMB75C SMB75CA SMB82C SMB82CA SMB91C SMB91CA SMB100C SMB100CA SMB110C SMB110CA SMB120C SMB120CA SMB130C SMB130CA SMB150C SMB150CA SMB160C SMB160CA SMB170C SMB170CA SMB180C SMB180CA SMB200C SMB200CA (BI) Min. 42.3 44.7 45.9 48.5 50.4 53.2 55.8 Max. 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.0 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 @IT( mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 MDK MDM MEK MEM MFK MFM MGK MGM MHK MHM MKK MKM MLK MLM MMK MMM 58.9 MNK MNM MPK MPM MQK MQM MRK MRM MSK MSM MTK MTM MUK MUM MVK MVM 61.2 64.6 67.5 71.3 73.8 77.8 81.9 86.5 MWK MWM 90.0 MXK MXM MYK MYM MZK MZM NDK NDM NEK NFK NEM NFM 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 NGK NGM NHK NHM NKK NKM NLK NLM NMK NMM NNK NNM NPK NPM NQK NQM NRK NRM NSK NTK NSM NTM 1) Suffix 'A ' denotes 5% tolerance device,no suffix denotes 10 % tolerance device. 2) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double .