UF3005

LITE-ON SEMICONDUCTOR UF3001 thru UF3007 REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 3.0 Amperes ULTRA FAST RECTIFIERS FEATURES Low cost Diffused junction Ultra fast switching for high efficiency Low reverse leakage current Low forward voltage drop High current capability The plastic material carries UL recognition 94V-0 A DO-201AD B A C D MECHANICAL DATA Case : JEDEC DO-201AD molded plastic Polarity : Color band denotes cathode Weight : 0.04 ounces, 1.1 grams Mounting position : Any Dim. A DO-201AD Min. Max. 25.4 7.30 9.50 B 1.20 1.30 C 4.80 5.30 D All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL UF3001 UF3002 UF3003 UF3004 UF3005 UF3006 UF3007 UNIT VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 3.0 150 600 420 600 800 560 800 1000 700 1000 V V V A @TA=55 C Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC Method) Maximum forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage IFSM VF IR TRR CJ R0JA A 1.0 1.3 5 100 50 75 20 -55 to +125 -55 to +150 1.7 V uA @TJ =25 C @TJ =100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range 75 50 ns pF C/W TJ TSTG C C REV. 2, 01-Dec-2000, KDCF02 NOTES : 1.Measured with IF=0.5A,IR=1A,IRR=0.25A. 2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Thermal Resistance Junction to Ambient. RATING AND CHARACTERISTIC CURVES UF3001 thru UF3007 AVERAGE FORWARD CURRENT AMPERES 3.0 PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 200 150 2.0 100 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 50 Single Half-Sine-Wave (JEDEC METHOD) 0 25 0 1 2 5 10 20 50 100 50 75 100 125 150 175 AMBIENT TEMPERATURE , C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL JUNCTION CAPACITANCE 1000 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT ,(A) UF3004 UF3001 to UF3004 CAPACITANCE , (pF) 100 UF3005 to UF3007 10 UF3001 to UF3004 UF3005 - UF3007 10 1.0 TJ = 25 C, f= 1MHz 1 0.1 1.0 4 100 TJ = 25 C PULSE WIDTH 300us 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 REVERSE VOLTAGE , VOLTS INSTANTANEOUS FORWARD VOLTAGE , VOLTS REV. 2, 01-Dec-2000, KDCF02