0213001

Axial Lead and Cartridge Fuses RoHS Pb 5 x 20 mm Time Lag Fuse (Slo-Blo ) Fuse 213P Series ® ® ® • Designed to International (IEC) Standards for use globally. • Meets the IEC 60127-2, Sheet 3 specification for Time Lag Fuses. • Available in Cartridge and Axial Lead Form. • Available in ratings of 0.200 to 6.3 amperes. ELECTRICAL CHARACTERISTICS (213 Series): % of Ampere Rating 150% 210% 275% 400% 1000% Ampere Rating .032 – 6.3 8 - 15 .032 – 15 .032 – .100 .125 – 15 .032 – .100 .125 – 15 .032 – .100 .125 – 15 Opening Time 60 minutes, Minimum 30 minutes, Minimum 2 minutes, Maximum 0.2 sec., Min.; 10 sec. Max. 0.6 sec., Min.; 10 sec. Max. .04 sec., Min.; 3 sec. Max. .15 sec., Min.; 3 sec. Max. .01 sec., Min.; 0.3 sec. Max. 0.02 sec., Min.; 0.3 sec. Max. ENVIRONMENTAL SPECIFICATIONS: Operating temperature: -55˚C to 125˚C Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5 cycles –65°C to +125°C) Vibration: MIL-STD-202F Method 201A Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative humidity (95%) and elevated temperature (40°C) for 240 hours. INTERRUPTING RATINGS: 35 amperes or 10 x rated current; (whichever is greater) to a maximum 100A @ 250 VAC, unity power factor. Salt Spray: MIL-STD-202F Method 101D, Test Condition B PHYSICAL SPECIFICATIONS: Material: Body: Glass ORDERING INFORMATION: 213 Surge Withstand Cartridge Catalog Number Ampere Rating Voltage Rating Nominal Resistance Cold Ohms Nominal Melting I2t A2Sec. 0213.200P 0213.250P 0213.315P 0213.400P 0213.500P 0213.630P 0213.800P 0213 001.P 0213 1.25P 0213 01.6P 0213 002.P 0213 02.5P 0213 3.15P 0213 004.P 0213 005.P 0213 06.3P .200 .250 .315 .400 .500 .630 .800 1 1.25 1.6 2 2.5 3.15 4 5 6.3 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1.60 1.05 0.848 0.535 0.370 0.275 0.164 0.116 0.082 0.055 0.045 0.030 0.023 0.017 0.012 0.010 0.225 0.555 1.14 1.36 2.90 4.80 9.42 19.20 27.15 44.2 92.7 138.0 202.0 226.5 314 600 w w w. l i t t e l f u s e . c o m 415 AXIAL LEAD AND CARTRIDGE FUSES Cap: Nickel Plated Brass Leads: Tin Plated Copper Terminal Strength: MIL-STD-202F Method 211A, Test Condition A Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking: Cap 1: current and voltage rating. 11 Cap 2: Agency approval markings. Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel). Axial Lead and Cartridge Fuses RoHS Pb 5 x 20 mm Time Lag Fuse (Slo-Blo ) Fuse 213P Series ® ® ® Agency Approvals Agency Approvals Certificate No Cartridge NBK120802-E10480 A&C Leaded NBK120802-E10480 B&D 2002010207007597 2003010207045592 Ampere Range 20+0.5 0213 000P 1A – 6.3A 5.1+0.6 5.1+0.6 5.2+0.1 -0.2 Certificate No. 200mA – 6.3A 5A 0213 000 XEP 40 22.5 MAX 5.8 MAX ® Recognised File No. E10480 Guide No. JDYX2 0.65 ® File No. Acc. Class No. Licence No. File No. 029862 LR1422-30 KM41462 9905092, 9923025, 304515 40015638 200mA – 4A, 6.3A 200mA – 6.3A Notes: * Ratings above 6.3A have 0.8 mm dia lead All dimensions in mm D V E Licence No. Average Time Current Curves 10000 1000 100 TIME IN SECONDS 10 1 0.1 0.01 0.001 0.1 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 1 10 CURRENT IN AMPERES 100 1000 416 w w w. l i t t e l f u s e . c o m