215250P

Axial Lead and Cartridge Fuses Designed to IEC Standard RoHS Pb 5 x 20 mm Time Lag Fuse (Slo-Blo ® Fuse) 215P Series ® ® • Designed to International (IEC) Standards for use globally. • Meets the IEC 60127-2, Sheet 5 specification for Time Lag Fuses. • Available in Car tridge and Axial Lead Form. • Available in ratings of .125 to 12 amperes. • High breaking capacity. • RoHS compliant and Lead-Free • Improved I2 t ELECTRICAL CHARACTERISTICS: % of Ampere Rating 150% 210% 275% 400% Ampere Rating .1-6.3 8-12 .1-12 .1-.8 1-12 .1-.8 1– 3.15 4 – 6.3 .1-.8 1-12 Opening Time 60 minutes, Minimum 30 minutes, Minimum 30 minutes, Maximum .25 sec., Min.; 80 sec. Max. .75 sec., Min.; 80 sec. Max. .05 sec., Min.; 5 sec. Max. .095 sec., Min.; 5 sec. Max. .150 sec., Min.; 5 sec. Max. .005 sec., Min.; .15 sec., Max. .010 sec., Min.; .15 sec., Max. ENVIRONMENTAL SPECIFICATIONS: Operating temperature: -55˚C to 125˚C Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5 1000% cycles –65°C to +125°C) Vibration: MIL-STD-202F Method 201A Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative humidity (95%) and elevated temperature (40°C) for 240 hours. Salt Spray: MIL-STD-202F Method 101D, Test Condition B INTERRUPTING RATING: 1500 amperes @ 250VAC, 0.7-0.8 power factor. PHYSICAL SPECIFICATIONS: Material: Body: Ceramic ORDERING INFORMATION: Cartridge Catalog Number 215.125P 215.160P 215.200P 215.250P 215.315P 215.400P 215.500P 215.630P 215.800P 215 001.P 215 1.25P 215 01.6P 215 002.P 215 02.5P 215 3.15P 215 004.P 215 005.P 215 06.3P 215 008.P 215 010.P 215 012.P Ampere Rating .125 .160 .200 .250 .315 .400 .500 .630 .800 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10 12 Voltage Rating 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Nominal Resistance Cold Ohms 7.585 7.100 1.840 1.240 0.880 0.583 1.168 0.720 0.468 0.152 0.107 0.071 0.057 0.039 0.028 0.019 0.015 0.011 0.009 0.007 0.006 Nominal Melting I2t A2 Sec. 0.033 0.046 0.341 0.545 0.974 1.324 0.424 0.633 0.974 2.360 4.240 8.120 14.760 32.050 89.970 37.684 80.675 129.022 204.001 351.037 515.500 w w w. l i t t e l f u s e . c o m 427 AXIAL LEAD AND CARTRIDGE FUSES Cap: Nickel Plated Brass Leads: Tin Plated Copper Filler: Sand (500mA – 12A) Terminal Strength: MIL-STD-202F Method 211A, Test Condition A Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking: Cap 1: current and voltage rating. Cap 2: Agency approval markings. Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel). 11 Axial Lead and Cartridge Fuses Designed to IEC Standard RoHS Pb 5 x 20 mm Time Lag Fuse (Slo-Blo ) Fuse 215P Series ® ® ® Agency Approvals Agency Approvals Cer tificate No. Car tridge NBK250702-E10480 NBK250702-E10480 Leaded NBK250702-E10480 NBK250702-E10480 2002010207007593 2005010207145714 SU05001-2011 SU05001-2012 Pending Ampere Range 0215 000P A & C 1A – 5A E 6.3A – 12A B & D 1A – 5A F 6.3A -12A 4A – 6.3A 1A – 3.15A 1A – 3.15A 4A – 10A 12A 20+0.5 5.2+0.1 -0.2 5.1+0.6 5.1+0.6 Cer tificate No. Cer tificate No. 0215.200 XEP to 0215.800 XEP 40 22.5 MAX 6.0 MAX 0.65 ® Recognised File No. E10480 Guide No. JDYX2 ® File No. Acc. Class No. Licence No. File No. 029862 LR1422-30 KM41462 606726 403906 501856 0147100 125mA – 12A 0215001.XEP to 0215012.XEP 40 22.5 MAX 5.8 MAX 200mA – 10A 125mA, 160mA 200mA – 800mA, 8A,10A 1A-3.15A 4A-6.3A 200mA – 8A 10A* 12A* 125mA – 12A 0.65* All dimensions in mm Notes: * Ratings above 6.3A have 0.8 mm dia lead D V E Licence No. Licence No. 40013521 40016610 Average Time Current Curves VDE *Approval for car tridge versions only 428 w w w. l i t t e l f u s e . c o m