2206001P

Axial Lead and Cartridge Fuses Subminiature Glass Body RoHS Pb 2AG Fast-Acting Fuse 2206P Series ® ® The 2AG Fast-Acting fuses are available with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. ELECTRICAL CHARACTERISTICS: % of Ampere Rating 100% 135% 200% CSA. Opening Time 4 hours, Minimum 1 hour, Maximum 1 second, Maximum AGENCY APPROVALS: All ratings are Listed by UL and Certified by AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. INTERRUPTING RATINGS: 0.75–3.0A 0.75–3.0A 10,000 amperes at 125VAC 35 amperes at 250VAC 2206 000P Series 4.7 (.184") 0.635 (.025") PACKAGING OPTIONS: 2206P Series available on Tape and Reel per EIA-296. 2206 series available in bulk packaging. For 1000 pieces bulk, add packaging suffix MXP. ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: –55°C to 125°C. Shock: MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds). Vibration: MIL-STD-202, Method 201 (10–55 Hz, 0.06 inches total excursion). Salt Spray: MIL-STD-202 Method 101, Test Condition B (48 hours). Insulation Resistance (After Opening): MIL-STD-202, Method 302, Test Condition B. Resistance to Soldering Heat: (Axial Leaded Fuses): MIL-STD-202, Method 210A, Test Condition B (260°C, 3 Seconds). Thermal Shock: MIL-STD-202, Method 107, Test Condition B (–65°C to 125°C). Moisture Resistance: MIL-STD-202, Method 106 (90-98% RH, 65°C). Solderability: (Axial Leaded Fuses): MIL-STD-202, Method 208. 14.48 (.57") 38.1 (1.50") TYP. Axial Lead Material: Tin coated copper. ORDERING INFORMATION: Axial Lead Catalog Number 2206.750P 2206 001P 2206 002P 2206 003P Ampere Rating .750 1 2 3 Voltage Rating 300 300 300 300 Nominal Resistance Cold Ohms 0.340 0.210 0.0699 0.0505 Nominal Melting I 2t A2 Sec. 2.95 5.64 30.0 50.0 PHYSICAL SPECIFICATIONS: Materials: Glass Body, Nickel-Plated Brass Fuse Caps. (Insulating sleeve option available). SOLDERING PARAMETERS: Wave solder — 500°F (260°C), 3 seconds Max. Reflow solder — Not recommended. PHYSCIALSPECIFICATIONS: Materials: Glass Body, Nickel-Plated Brass Fuse Caps SOLDERING PARAMETERS: Wave solder- 500˚F(260˚C), 3 seconds Max. Reflow solder- Not recommended w w w. l i t t e l f u s e . c o m 391