265.500

Next Previous Axial Lead and Cartridge Fuses High-Reliability Subminiature PICO® Fuse Very Fast-Acting Fuse 265/266/267 Series ELECTRICAL CHARACTERISTICS: % of Ampere Rating 100% 200% Ampere Rating 1/16 –15 1/16 –7 10 15 Opening Time 4 hours, Minimum 1 second, Maximum 3 seconds, Maximum 10 seconds, Maximum ® ® QPL AGENCY APPROVALS: Recognized under the Components Program of Underwriters Laboratories and Certified by CSA. AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. FUSES TO MIL SPEC: 265 Series (except 1/16 ampere rating) is available in FM08A on QPL for MIL-PRF-23419/8. To order, change 265 to 267. 265 000 Series 38.1 (1.50") 7.11 (.28") 3/4 A 38.1 (1.50") 2.36 (.093") DIA. INTERRUPTING RATINGS: 300 amperes at rated voltage VDC 50 amperes at rated voltage VAC ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: –55°C to 125°C. Shock: MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds). Transparent Insulating Sleeve 266 000 Series 8.38 (.33) (Note 1) 7.11 (.28") 2.36 (.093") DIA. 90° 3/4 A Vibration: MIL-STD-202, Method 201 (10–55 Hz); MIL-STD-202, Method 204, Test Condition C (55–2000 Hz at 10 G’s Peak). Salt Spray: MIL-STD-202, Method 101, Test Condition B. Seal Test: MIL-STD-202, Method 112, Test Condition A. Insulation Resistance (After Opening): MIL-STD-202, Method 302, Test Condition A (1/2 Megohm minimum). 37.33 (1.47") Transparent Insulating Sleeve (Note 1: 9.14 (.36") for 15 amp rating) Thermal Shock: MIL-STD-202, Method 107, Test Condition B (–65°C to 125°C). ORDERING INFORMATION: Axial Lead Catalog Number 265.062 265.125 265.250 265.375 265.500 265.750 265 001 265 01.5 265 002 265 02.5 265 003 265 004 265 005 265 007 265 010 265 015 Radial Lead Catalog Number 266.062 266.125 266.250 266.375 266.500 266.750 266 001 266 01.5 266 002 266 02.5 266 003 266 004 266 005 266 007 266 010 266 015 Ampere Rating 1/16 1/8 1/4 3/8 1/2 3/4 1 11/2 2 21/2 3 4 5 7 10 15 Voltage Rating 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 32 Nominal Resistance Cold Ohms 7.0 2.1 0.71 0.42 0.28 0.17 0.125 0.08 0.055 0.042 0.03515 0.023 0.014 0.01 0.00645 0.004 Moisture Resistance: MIL-STD-202, Method 106. PHYSICAL SPECIFICATIONS:. Materials: Gold-Plated Copper Leads, Type II Weight: .32 Grams Solderability: MIL-STD-202, Method 208. Lead Pull Force: MIL-STD-202, Method 211, Test Condition A (will withstand a 5 lb. axial pull test). AQL (Electrical Characteristics): Certified to 1% AQL. Sampling: Per MIL-STD-105, Inspection Level II. Traceability and Identification Records: Controlled by lot number and retained on file for a minimum of three years. Copies of Lot Certification Test data available when requested with order. OPTIONS: Special screening tests, burn-in, etc. can be supplied on special order to meet specific requirements. For information on higher current ratings, contact Littelfuse. PATENTED Please contact Littelfuse for Average Time Current Curve. 284 w w w. l i t t e l f u s e . c o m