3691.000000

Radial Lead Fuses TE5® > Time-Lag > 369 Series 369 Series, TE5®, Time-Lag Fuse Description TE5® Features Lead-free Agency Approvals Applications Agency Agency File Number Ampere Range Electrical Characteristics for Series % % % % Electrical Characteristics Specifications by Item Amp Code 1100 1160 1200 1315 1400 1500 1630 Amp Rating (A) 1.00 1.60 2.00 3.15 4.00 5.00 6.30 Voltage Rating (V) 300 300 300 300 300 300 300 50A@300VAC 50-60Hz/cos =1 Voltage Drop 1.0 x IN max. (mV) 115 95 90 80 75 70 65 Power Dissipation 1.5 x IN max. (mW) 400 600 700 1100 1200 1000 1200 Melting Integral 10 x IN min. (A2s) 5.80 13.50 21.00 55.00 100.00 90.00 126.00 Agency Approvals Breaking Capacity X X X X X X X X X X X X X © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. 163 Revised: May 5, 2009 369 Series 369 Series % of Ampere Rating Opening Time Radial Lead Fuses Introduction to Circuit Protection Transientology TE5® > Time-Lag > 369 Series Temperature Rerating Curve Average Time Current Curves 6.3A 5A 4A 3.15A 2.5A 2A 1.6A 1.25A 1A .800A 100000 10000 1000 100 TIME IN SECONDS 10 1 0.1 0.01 0.001 0.1 1 10 CURRENT IN AMPERES 100 1000 Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: Wave Parameter Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature (°C) - Measured on bottom side of board 280 260 240 220 200 180 160 140 120 100 80 60 40 20 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 10 20 30 40 50 60 70 80 90 0 0 Lead-Free Recommendation Temperature Minimum: Temperature Maximum: Preheat Time: Solder Pot Temperature: Solder Dwell Time: 100° C 150° C 60-180 seconds 260° C Maximum 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Time (Seconds) Preheat Time Dwell Time Cooling Time 369 Series 164 Revised: May 5, 2009 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. Radial Lead Fuses TE5® > Time-Lag > 369 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA6.6, UL 94 V0 Round Pins: Tin-plated Copper 10 N (IEC 60068-2-21) 260°C, ≤ 3s (Wave) 350°C, ≤ 1s (Soldering Iron) 260°C, 10s (IEC60068-2-20) 350°C, 3s (Soldering Iron) Stock Condition Operating Temperature Climatic Category -40°C to +85°C (considerde-rating) -40°C / +85°C / 21days (EN60068-1,-2-1,-2-2,-2-78) +10°C to +60°C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% 24 cycles at 15min. Each (EN60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Materials Lead Pull Strength Solderability Soldering Heat Resistance Vibration Resistance Dimensions 8.5 max.4 Part Numbering System 369 xxxx 0000 Series Amp Code Refer to Amp Code column of Electrical Characteristics Table max. 8 0.5 min 0.6 1.5 Packaging Code 5.08 Holes in PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging 369 Series Tape & Ammopack Short Leads N/A N/A 1,400 1,400 0000 0440 N/A N/A © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. 165 Revised: May 5, 2009 369 Series 369 Series 0000 Tape/Ammopack (1,400pcs.) 0440 Short Leads - Bulk (1,400pcs.) 1 + 0.1