3851125000

CIRCUIT PROTECTORS No. 385 / TIP Telecom Interface Protector Specifications Packaging Lead Free 000: Tape/Ammopack (1400 pcs.) T ime-Current Standard Transient Tolerant (T) UL 248-14 CSA C22.2 No. 248.14 cULus Recognized Characteristic Materials Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated -40 ºC to +85 ºC (consider de-rating) -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-2-78) +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration 10N (EN 60068-2-21) 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) 260 ºC, 10 s (IEC 60068-2-20) , TIP, T, Current Rating Approvals Temperature Operating Temperature Climatic Category Stock Conditions Features Dimensions (mm) 8,5 max. 8 max. 4 Surge proof for telecom applications Reduced PCB space requirements Highly defined cut-off times Irreversible physical separation Low internal resistance Flame resistant encapsulated casing CCCe for China import Vibration Resistance 0,5 min 18,8 ∅ 0,6 1,5 W ebLinks Further infos see: www.wickmanngroup.com Further application infos see Fuseology: Lead Pull Strength Solderability 5,08 1 +0,1 www.wickmanngroup.com/download/ fuseology.pdf Soldering Heat Resistance Marking Holes in PCB Unit Weight 0.60 g (approx.) Limits for Pre-arcing Time Rated Current 350 mA ... 1.50 A 1.0 x IN >2h 3.0 x IN 300 ms ... 5 s Bellcore cURus 350mA 500mA 800mA 1.00A 1.25A 1.50A 1 FCC 47 Part 68: 0350 0500 0800 1100 1125 1150 125V 125V 125V 125V 125V 125V 50 A / 125 V AC 50-60 Hz cos ϕ = 1.0 540 320 160 105 75 60 250 220 170 140 125 120 90 110 130 130 140 170 0.6 1.2 2.7 4.5 6.7 9.0 32 48 80 100 128 155 19 26 42 52 65 78 36 61 67 67 67 67 • • • • • • ITU-T K.20: Bellcore GR-1089: Minimum pulse load quantity is 2 pulses at a test generator output of 800V and 10x560µs waveform. Minimum pulse load quantity is 30 pulses at a test generator output of 1000V, 67A and 10x700µs waveform. Minimum pulse load quantity is 50 pulses at a test generator output of 1000V and 10x1000µs. Order Information 0 50223 Qty. OrderNumber Series 385 Amp Code Packaging Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: sales@wickmann.cn WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: sales@wickmann.com Americas Tel: +1 404 699-7820 E-mail: service@wickmannusa.com Asia Tel: +852 26 14-1108 E-mail: sales@wickmann.com.hk CCCe FCC ITU Permissible continuous operating current is ≤ 70% at ambient temperature of 23ºC (73.4ºF). 70% Rated Amp Voltage Breaking Cold Resistance Voltage Drop Power Dissipation Melting Integral 1.0 x IN 1.0 x IN 10 x IN Current Code Rating Capacity 0.1 x IN max. (mΩ) max. (mV) max. (mW) min. (A2s) Surge Amplitude (A)1 Approvals • • • • • • CIRCUIT PROTECTORS TIP / No. 385 I-t Characteristics (Min-Max Limit) Test value Time (sec.) 0 50223 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: sales@wickmann.com 00 0,0 10 ,00 10 0 0 1,0 0 10 0 10 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 IFault / I Rated Contact WICKMANN for individual I-t curves Americas Tel: +1 404 699-7820 E-mail: service@wickmannusa.com Asia Tel: +852 26 14-1108 E-mail: sales@wickmann.com.hk China Tel: +86 21 6432 5146 E-mail: sales@wickmann.cn