L0103NT

Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs L01 Series Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are glass-passivated to ensure long term reliability and parametric stability. Features μsec mount packages 10Amps Main Features Symbol IT(RMS) VDRM/VRRM IGT Value 1 400 to 800 3 to 10 Unit A V mA ) capability — up to 800V DRM Applications The L01 EV Series is especially designed for white goods applications such as valve controls in washing machines as well as replacement of mechanical and hybrid relays where long life is required. Schematic Symbol MT2 G MT1 Absolute Maximum Ratings Symbol IT(RMS) RMS on-state current (full sine wave) Non repetitive surge peak on-state current (Single cycle, TJ initial = 25°C) Parameter TO-92 SOT-223 TO-92 SOT-223 tp = 10 ms tp = 8.3 ms TO-92 SOT-223 tp = 10 μs TC = 50°C TL = 90°C F = 50 Hz F = 60 Hz F = 50 Hz F = 60 Hz TJ = 125°C TJ = 125°C TJ = 125°C Value 1.0A 10 A 12 0.50 0.59 20 1 0.1 -40 to 150 -40 to 125 43 43 Revised: July 9, 2008 Unit A ITSM I 2t I2t Value for fusing A2s di/dt IGTM PG(AV) Tstg TJ ©2008 Littelfuse, Inc. Critical rate of rise of on-state current IG = 2 x IGT Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range A/μs A W °C °C L01 Series Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. EV 1.0 A TRIACs Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol IGT VGT IH dv/dt Description DC Gate Trigger Current DC Gate Trigger Voltage Holding Current Critical Rate-of-Rise of Off-State Voltage Critical Rate-of-Rise of Commutating Voltage Turn-On Time Test Conditions VD = 12V RL = 60 Ω Quadrant I – II – III IV ALL Limit MAX. MAX. MAX. MIN. Value L0103xy 3 5 — 7 10 L0107xy 5 7 1.3 10 20 L0109xy 10 10 — 10 50 Unit mA V mA V/μs Gate Open TJ = 110°C VD = VDRM Exponential Waveform Gate Open (di/dt)c = 0.54A/ms TJ = 110°C IG = 25mA PW = 15μs IT = 1.2A (pk) (dv/dt)c MIN. 0.5 1.0 2.0 V/μs Tgt MAX. 2.0 2.0 2.0 μs Note: x = voltage, y = package Static Characteristics (TJ = 25°C, unless otherwise specified) Symbol VTM IDRM Description Peak On-State Voltage Off-State Current, Peak Repetitive Test Conditions ITM = 1.4A (pk) VD= VDRM TJ = 25°C VD= VDRM TJ = 125°C Limit MAX MAX Value 1.60 5 500 Unit V μA μA Thermal Resistances Symbol Rth(j-c) Description Junction to case (AC) Test Conditions IT = 1.0A (RMS)1 TO-92 SOT-223 TO-92 SOT-223 Value 50 23 100 55 Unit °C/W Rth(j-a) 1 Junction to ambient IT = 1.0A (RMS)1 °C/W 60Hz AC resistive load condition, 100% conduction. L01 Series 44 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Figure 1: Definition of Quadrants Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature 3.0 ALL POLARITIES ARE REFERENCED TO MT1 MT2 POSITIVE (Positive Half Cycle) MT2 (-) + MT2 MT1 MT1 IGT IGT GATE (+) IGT GATE IGT (TJ = 25°C) 2.0 IGT + MT2 IGT GATE IGT Ratio of (-) REF MT2 IGT GATE MT1 REF QII QI QIII QIV (+) REF 1.0 0.0 MT2 NEGATIVE (Negative Half Cycle) - MT1 REF -40 -15 +25 +65 +105 +125 Junction Temperature (TJ)- ºC Figure 3: Normalized DC Holding Current vs. Junction Temperature 3.0 Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 2.00 INITIAL ON-STATE CURRENT = 100mA (DC) 2.5 1.75 VGT (TJ = 25°C) IH (TJ = 25°C) 1.50 1.25 1.00 0.75 0.50 0.25 2.0 1.5 Ratio of 1.0 0.5 0.0 -55 -40 -15 +5 +25 +45 +65 +85 +105 +125 Ratio of VGT IH 0.0 -55 -40 -15 +5 +25 +45 +65 +85 +105 +125 Junction Temperature (TJ)- ºC Junction Temperature (TJ)- °C Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 2.00 Figure 6: Maximum Allowable Case Temperature vs. On-State Current Maximum Allowable Case Temperature (TC) - ºC 130 125 120 110 100 90 80 70 60 50 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 TO-92 SOT-223 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° CASE TEMPERATURE: Measured as shown on dimensional drawings Average On-state Power Dissipation [PD(DAV)] - Watts 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.0 0.0 0.1 0.2 0.3 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360° 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 RMS On-state Current [IT(RMS)] - Amps RMS On-state Current [IT(RMS)] - Amps ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 45 45 Revised: July 9, 2008 L01 Series EV 1.0 A TRIACs Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Figure 7: Surge Peak On-State Current vs. Number of Cycles 20 Peak Surge (Non-repetitive) On-State Current (ITSM) – Amps. 15 12 10 9 8 7 6 5 4 3 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 1A Dev ices 2 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 60 0 1 00 0 Surge Current Duration – Full Cycle Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus Temp) (TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Pb – Free assembly TP Temperature 150°C 200°C 60 – 180 secs 5°C/second max 5°C/second max 217°C 60 – 150 seconds 260 +0/-5 tP Ramp-up TL TS(max) Preheat Preheat tL Ramp-do Ramp-down TS(min) tS 25 time to peak temperature Time Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peak Temperature (TP) Do not exceed °C 20 – 40 seconds 5°C/second max 8 minutes Max. 280°C L01 Series 46 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Physical Specifications Terminal Finish Body Material Lead Material 100% Matte Tin-plated. UL recognized epoxy meeting flammability classification 94V-0. Copper Alloy Environmental Specifications Test AC Blocking Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time Temperature Cycling Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. High Temp Storage Low-Temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E Thermal Shock Autoclave Resistance to Solder Heat Solderability Lead Bend Dimensions — TO-92 (E Package) Dimensions A B C D E F G H I J Inches Min 0.175 0.170 0.500 0.135 0.125 0.080 0.016 0.045 0.095 0.015 Typ — — — 0.165 — 0.095 — 0.050 0.100 — Max 0.205 0.210 — — 0.165 0.105 0.021 0.055 0.105 0.020 Min 4.450 4.320 12.700 3.430 3.180 2.040 0.407 1.150 2.420 0.380 Millimeters Typ — — — 4.190 — 2.400 — 1.270 2.540 — Max 5.200 5.330 — — 4.190 2.660 0.533 1.390 2.660 0.500 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 47 47 Revised: July 9, 2008 L01 Series EV 1.0 A TRIACs Temperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Dimensions – SOT-223 Dimensions Pad Layout for SOT-223 3.3 (0.130”) Inches Min 0.248 0.130 — 0.001 0.114 0.024 — — 0.264 0.009 Typ 0.256 0.138 — — 0.118 0.027 0.090 0.181 0.276 0.010 Max 0.264 0.146 0.071 0.004 0.124 0.034 — — 0.287 0.014 Min 6.30 3.30 — 0.02 2.90 0.60 — — 6.70 0.24 Millimeters Typ 6.50 3.50 — — 3.00 0.70 2.30 4.60 7 .00 0.26 Max 6.70 3.70 1.80 0.10 3.15 0.85 — — 7 .30 0.35 A B C D 1.5 (0.059”) 1.2 (0.047”) (3x) 1.5 (0.059”) 2.3 (0.091”) 6.4 (0.252”) E F 4.6 (0.181”) G H I J K Dimensions in Millimeters (Inches) 10° MAX Product Selector Part Number L0103DE L0103ME L0103NE L0103DT L0103MT L0103NT L0107DE L0107ME L0107NE L0107DT L0107MT L0107NT L0109DE L0109ME L0109NE L0109DT L0109MT L0109NT L01 Series Voltage 400 V 600 V 800 V 400 V 600 V 800 V 400 V 600 V 800 V 400 V 600 V 800 V 400 V 600 V 800 V 400 V 600 V 800 V Gate Sensitivity Quadrants I II III IV 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA 5 mA 5 mA 5 mA 5 mA 5 mA 5 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 48 Revised: July 9, 2008 Package TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 TO-92 TO-92 TO-92 SOT-223 SOT-233 SOT-233 TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 ©2008 Littelfuse, Inc. 5 mA 5 mA 5 mA 5 mA 5 mA 5 mA 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs Packing Options Part Number L01xxyE L01xxyEAP L01xxyERP L01xxyTRP Note: xx = gate sensitivity, y = voltage Marking L01xxyE L01xxyE L01xxyE L01xxyT Weight 0.170 g 0.170 g 0.170 g 0.120 g Packing Mode Bulk Ammo Pack Tape & Reel Tape & Reel Base Quantity 2500 2000 2000 1000 TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-B 1994 Standards 1.6 (41.0) 0.236 (6.0) 0.02 (0.5) 0.098 (2.5) MAX 1.26 (32.0) 0.708 (18.0) 0.354 (9.0) 0.5 (12.7) 0.1 (2.54) 14.17(360.0) MT2 / Anode MT1 / Cathode 0.2 (5.08) Gate 0.157 DIA (4.0) Flat up 1.97 (50.0) Dimensions are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-B 1994 Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.5 (12.7) 0.1 (2.54) MT2 / Anode 0.2 (5.08) MT1 / Cathode Gate 0.157 (4.0) DIA Directio n of Feed Flat down 25 Devices per fold 1.85 (47.0) 12.2 (310.0) Dimensions are in inches (and millimeters). 1.85 (47.0) 13.3 (338.0) ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 49 49 Revised: July 9, 2008 L01 Series EV 1.0 A TRIACs Teccor® brand Thyristors EV Series 1 Amp Sensitive Triacs SOT-223 Reel Pack (RP) Specifications 1.5 mm 4 mm 8 mm 2 mm A / MT2 1.75 mm 12 mm 5.5 mm K / MT1 A / MT2 GATE 180 mm 13 mm Abor Hole Diameter 13.4 mm Part Numbering System Part Marking System L 01 xx x xx xx DC TRIAC SERIES CURRENT 01: 1A SENSITIVITY & TYPE 03: 3, 3, 3, 5mA Triac 07: 5, 5, 5, 7mA Triac 09: 10, 10, 10, 10mA Triac PACKING TYPE Blank: Bulk Pack RP : Reel Pack (TO-92) : Embossed Carrier Pack (SOT-223) AP : Ammo Pack (TO-92) PACKAGE TYPE E: TO-92 T: SOT-223 VOLTAGE D: 400V M: 600V N: 800V Date Code (2 Digits Min.) Number = Year Letter = Month MT2 MT 1 MT2 MT1 G MT2 G L01 Series 50 Revised: July 9, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.