LJ600100-3

LJ600100-3

  • 厂商:

    LITTELFUSE

  • 封装:

  • 描述:

    LJ600100-3 - Class J Fuse Blocks - Littelfuse

  • 详情介绍
  • 数据手册
  • 价格&库存
LJ600100-3 数据手册
Class J Fuse Blocks 600 Volt SPECIFICATIONS Voltage Ratings: 600 Volts Ampere Ratings: 0 – 600 amperes Approvals: UL Listed: File No. E14721 CSA Certified: File No. LR73091 RECOMMENDED FUSES JTD_ID/JTD (time-delay) and JLS (fast-acting) series fuses For use with space-saving, high interrupting capacity, very current-limiting 600 volt Class J fuses. Class J 600V Amp No. of Rating Poles 1 2 3 Adder 1 2 3 1 3 1 3 1 3 1 3 Catalog Number LJ60030-1 LJ60030-2 LJ60030-3 LJ60030-A LJ60060-1 LJ60060-2 LJ60060-3 LJ60100-1 LJ60100-3 LJ60200-1 LJ60200-3 LJ60400-1 LJ60400-3 LJ60600-1 LJ60600-3 Connector Type (Add suffix shown) Screw Pressure Plate Box Lug Maximum Wire Size 30 S (R) S (R) S (R) S (R) P (R) P (R) P (R) P (R) 60 100 200 400 FEATURES/BENEFITS I I 600 Phenolic blocks have side barriers for isolation. Spring reinforced fuse clips are standard on 100A and larger blocks. Reinforcing springs are optional on 30 and 60 amp blocks. Space saving 30A design — Up to 45% smaller than existing 30 A fuse blocks. 30A interlocking adder block available to create any number of poles (consult factory for availability). Integral DIN rail mount allows this block to be securely fastened to 35 mm “hat” type DIN rails without the use of tools. LJ60030 .216[5.5] x .79[20.0] SLOT MOUNTING HOLE C (R) C (R) S & P = #10 CU C (R) C = #6 CU C (R) C (R) C (R) C = #2 CU-AL C (R) CR #2/0 CU-AL CR C 250 MCM CU-AL C CR 350 MCM CU-AL CR CR (2) 500 MCM CU-AL CR Note: Reinforcing springs standard on all Class J fuse blocks rated 100A and above. *For optional fuse block covers, refer to Blocks and Holders section. I 1.04" [26.4] 1.04" [26.4] 1.69" [42.8] 1.69" [42.8] 1.69" [42.8] 3.38" [85.7] 3.38" [85.7] 3.38" [85.7] .30" TYP. [7.6] .57" 1.16" [29.4] [14.5] .57" TYP. [14.5] 3.25" [82.5] .71" 1.95" [49.5] [17.9] 2.20" [56.0] 1 POLE 2 POLE 3 POLE 115 Class J Fuse Blocks 600 Volt LJ60060 1.67" [42.4] .265" x .325" SLOT [6.7 x 8.3] TYP. 3.20" [81.2] 4.72" [120] 4.07" [103] 4.07" [103] 4.07" [103] 2.03" [51.7] 2.03" [51.7] 2.03" [51.7] .57" .76" [19] .76" .45" [12] 1.53" [38.8] [19] .76" .45" [12] [14 ] 1.53" [38.8] 1.53" [38.8] 3 POLE [19] 2.09" .45" [12] [53.0] 1 POLE 2 POLE LJ60100 1 POLE 3 POLE LJ60200 1.31" [33.39] 3.00" [76.2] .34" THRU [8.6] .75" C'BORE [19.1] x .400" DP. [10.2] 6.13" [156] .50" [13] .62" 2.00" [50.8] [16] 1 POLE 2.67" [67.9] 3 POLE 116 Class J Fuse Blocks 600 Volt LJ60400 1 POLE 3 POLE LJ60600 1 POLE 3 POLE 117
LJ600100-3
1. 物料型号: - LJ60030-1, LJ60030-2, LJ60030-3, LJ60030-A(加法器), LJ60060-1, LJ60060-2, LJ60060-3, LJ60100-1, LJ60100-3, LJ60200-1, LJ60200-3, LJ60400-1, LJ60400-3, LJ60600-1, LJ60600-3。

2. 器件简介: - POWR-GARD系列的Class J Fuse Blocks,600伏特级别,具有侧向隔离屏障的酚醛树脂块。100A及更大型号的标准弹簧加强熔断器夹,30A和60A型号可选。

3. 引脚分配: - 1极、2极、3极配置,具体型号对应不同极数。

4. 参数特性: - 电压等级:600伏特。 - 安培等级:0-600安培。 - 认证:UL Listed(文件编号E14721)和CSA Certified(文件编号LR73091)。

5. 功能详解: - 节省空间的30A设计,比现有的30A熔断器块小45%。30A互锁加法器块可用于创建任意数量的极(需咨询工厂了解可用性)。整体DIN导轨安装允许此块安全固定在35mm“帽子”型DIN导轨上。

6. 应用信息: - 适用于需要高中断容量、非常限流的600伏特Class J熔断器的应用场合。

7. 封装信息: - 提供了不同安培额定值和极数的多种封装选项,包括螺丝、压力板和箱式接线端子。
LJ600100-3 价格&库存

很抱歉,暂时无法提供与“LJ600100-3”相匹配的价格&库存,您可以联系我们找货

免费人工找货