MicroCapacitance (MC) SA SIDACtor® Device
RoHS
¨
These DO-214AA SAMC SIDACtor devices are intended for applications sensitive to load values. Typically, high speed connections, such as Ethernet, xDSL, and T1/E1, require a lower capacitance. CO values for the MicroCapacitance device are 40% lower than a standard SA part. This SAMC SIDACtor series enables equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA968-A (formerly known as FCC Part 68).
Electrical Parameters
Part Number * P0080SAMCL P0220SAMCL P0300SAMCL VDRM Volts 6 15 25 VS Volts 25 32 40 VT Volts 4 4 4 IDRM µAmps 5 5 5 IS mAmps 800 800 800 IT Amps 2.2 2.2 2.2 IH mAmps 50 50 50
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. General Notes: • All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VDRM is measured at IDRM. • VS is measured at 100 V/µs. • Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Surge Ratings in Amps
IPP Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps A 20 Amps 150 Amps 150 10x160 * 10x160 ** Amps 90 10x560 * 10x560 ** Amps 50 5x320 * 9x720 ** Amps 75 10x360 * 10x1000 * 5x310 * ITSM 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz Amps 75 Amps 45 Amps 75 Amps 20 di/dt Amps/µs 500
* Current waveform in µs ** Voltage waveform in µs
www.littelfuse.com
3-8
© 2006 Littelfuse • Telecom Design Guide
MicroCapacitance (MC) SA SIDACtor® Device
Thermal Considerations
Package DO-214AA Symbol TJ TS RθJA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +150 -65 to +150 90 Unit °C °C °C/W
Capacitance Values
pF Part Number P0080SAMCL P0220SAMCL P0300SAMCL MIN 25 25 15 MAX 55 50 35
Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
+I
IT IS IH IDRM -V VT VDRM VS +V
IPP – Peak Pulse Current – %IPP
100
Peak Value
tr = r ise time to peak value td = decay time to half value
Waveform = tr x td
50
Half Value
0 0
-I
tr
td t – Time (µs)
V-I Characteristics
tr x td Pulse Waveform
Percent of VS Change – %
10 8
IH (TC = 25 ˚C)
14 12
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160
6 4 2 0 -4 -6 -8 -40 -20 0
IH
25 ˚C
25 ˚C
20 40 60 80 100 120 140 160
Ratio of
Case Temperature (TC) – ˚C
Normalized DC Holding Current versus Case Temperature
Junction Temperature (TJ) – ˚C
Normalized VS Change versus Junction Temperature
Telecom Design Guide • © 2006 Littelfuse
3-9
www.littelfuse.com
SIDACtor Devices
很抱歉,暂时无法提供与“P0300SAMCL”相匹配的价格&库存,您可以联系我们找货
免费人工找货