P0304UCLXX

SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Multiport Series - MS-013 Description SIDACtor® Multiport Series MS-013 are designed to protect baseband equipment from overvoltage transients. Targeted for voice through DS-1 applications, the series provides a dual port surface mount solution that enables equipment to comply with various global regulatory standards. Features and Benefits Low voltage overshoot Agency Approvals Agency Agency File Number E133083 Low on-state voltage Does not degrade with use Replaces four discrete components Applicable Global Standards Fails short circuit when surged in excess of ratings Low Capacitance Pinout Designation 1 2 3 Schematic Symbol (T1) 1 (G1) 2 (R1) 3 6 5 4 TIA-968-A TIA-968-B ITU K.20/21 Enhanced Level* ITU K.20/21 Basic Level GR 1089 Inter-building* GR 1089 Intra-building IEC 61000-4-5 YD/T 1082 YD/T 993 YD/T 950 6 (T2) 5 (G2) 4 (R2) *A-rated parts require series resistance Electrical Characteristics VDRM @lDRM=5μA Part Number Marking V min VS @100V/μs V max VDRM @lDRM=5μA V min VS @100V/μs V max VT @IT=2.2 Amps V max Pins 1-2, 3-2, 4-5, 6-5 mA min mA max A max IH IS IT Capacitance Pins 1-2, 3-2, 4-5, 6-5 Pins 1-3, 4-6 P0084UALxx P0304UALxx P0644UALxx P0724UALxx P0904UALxx P1104UALxx P1304UALxx P1504UALxx P0084UA P0304UA P0644UA P0724UA P0904UA P1104UA P1304UA P1504UA 6 25 58 65 75 90 120 140 25 40 77 88 98 130 160 180 12 50 116 130 150 180 240 280 50 80 154 176 196 260 320 360 4 4 4 4 4 4 4 4 50 50 150 150 150 150 150 150 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 See Capacitance Values Table 2.2 Table continues on next page. © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 143 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Characteristics (continued) VDRM @lDRM=5μA Part Number Marking V min VS @100V/μs V max VDRM @lDRM=5μA V min VS @100V/μs V max VT @IT=2.2 Amps V max Pins 1-2, 3-2, 4-5, 6-5 mA min mA max A max IH IS IT Capacitance Pins 1-2, 3-2, 4-5, 6-5 Pins 1-3, 4-6 P1804UALxx P2304UALxx P2604UALxx P3104UALxx P3504UALxx P0084UCLxx P0304UCLxx P0644UCLxx P0724UCLxx P0904UCLxx P1104UCLxx P1304UCLxx P1504UCLxx P1804UCLxx P2304UCLxx P2604UCLxx P3104UCLxx P3504UCLxx P1804UA P2304UA P2604UA P3104UA P3504UA P0084UC P0304UC P0644UC P0724UC P0904UC P1104UC P1304UC P1504UC P1804UC P2304UC P2604UC P3104UC P3504UC 170 190 220 275 320 6 25 58 65 75 90 120 140 170 190 220 275 320 220 260 300 350 400 25 40 77 88 98 130 160 180 220 260 300 350 400 340 380 440 550 640 12 50 116 130 150 180 240 280 340 380 440 550 640 440 520 600 700 800 50 80 154 176 196 260 320 360 440 520 600 700 800 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 150 150 150 150 150 50 50 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 See Capacitance Values Table 2.2 2.2 2.2 2.2 2.2 2.2 Notes: - Absolute maximum ratings measured at TA - Devices are bi-directional - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). Capacitance Values Pin 1-2 / 3-2 (4-5 / 6-5) Tip-Ground, Ring-Ground pF min 25 15 40 35 35 30 25 25 25 25 20 20 20 35 25 55 50 45 45 40 35 35 30 30 25 pF max 155 140 60 60 55 50 45 40 35 35 35 35 35 285 250 155 145 135 115 105 95 90 85 80 75 Pin 1-3 (4-6) Tip-Ring pF min 15 10 20 20 20 15 15 15 10 10 10 10 10 20 10 30 25 25 25 20 20 15 15 15 15 pF max 90 90 35 35 30 30 25 25 20 20 20 20 20 165 145 90 85 80 65 60 55 50 50 45 45 Part Number P0084UALxx P0304UALxx P0644UALxx P0724UALxx P0904UALxx P1104UALxx P1304UALxx P1504UALxx P1804UALxx P2304UALxx P2604UALxx P3104UALxx P3504UALxx P0084UCLxx P0304UCLxx P0644UCLxx P0724UCLxx P0904UCLxx P1104UCLxx P1304UCLxx P1504UCLxx P1804UCLxx P2604UCLxx P3104UCLxx P3504UCLxx © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 144 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Surge Ratings IPP Series 0.2x310 0.5x700 2 1 ITSM 5x320 1 9x720 2 A min 75 200 10x360 1 10x360 2 A min 75 175 10x1000 1 10x1000 2 A min 45 100 5x310 1 10x700 2 A min 75 200 50/60 Hz A min 20 30 2x10 2x10 2 1 8x20 1.2x50 2 1 10x160 10x160 2 1 10x560 1 10x560 2 A min 50 150 di/dt A/μs max 500 500 A min A C Notes: 1 Current waveform in μs 2 Voltage waveform in μs A min 150 500 A min 150 400 A min 90 200 20 50 - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40°C < TJ < Thermal Considerations Package Modified MS-013 6 5 4 1 2 3 Symbol TJ TS R0JA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value Unit °C °C 60 °C/W V-I Characteristics +I tr x td Pulse Waveform tr = r ise time to peak value td = decay time to half value IPP – Peak Pulse Current – %IPP IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value Waveform = tr x td 50 Half Value 0 0 -I tr td t – Time (μs) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 2.0 Percent of VS Change – % IH (TC = 25ºC) 14 12 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 °C 25°C Junction Temperature (TJ) – °C Ratio of Case Temperature (TC) - ºC 145 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pb-Free assembly (see Fig. 1) Figure 1 TP Ramp-up tP Critical Zone TL to TP Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. 3°C/sec. Max. 3°C/sec. Max. 60-150 secs. TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Temperature Average ramp up rate (Liquidus Temp (TL) to peak) TL TS(max) Preheat tL Ramp-down TS(min) tS Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) Ramp-down Rate Time 25°C to Peak Temp (TP) Do not exceed 30 secs. Max. 6°C/sec. Max. 8 min. Max. 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Lead Material Terminal Finish Body Material Copper Alloy 100% Matte-Tin Plated Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC JEDEC, JESD22-A-101 JEDEC, JESD22-A-101 -65°C, 1008 hrs. 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 JEDEC, JESD22-A-102 Temp Cycling UL recognized epoxy meeting flammability classification 94V-0 Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Autoclave (Pressure Cooker Test) Resistance to Solder Heat Moisture Sensitivity Level Part Numbering Part Marking P xxx 4 U x L xx TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE PACKING OPTIONS XXXXXXX RoHS COMPLIANT Part Marking Code (Refer to Electrical Characteristics Table) Date Code XXXXX IPP RATING © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 146 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — MS-013 Inches Min 0.360 0.352 0.400 0.043 0.047 0.293 0.289 0.089 0.041 0.020 0.133 Max 0.364 0.356 0.412 0.045 0.055 0.297 0.293 0.093 0.049 --0.143 Millimeters Min 9.14 8.94 10.16 1.09 1.19 7 .44 7 .34 2.26 1.04 0.51 3.38 Max 9.25 9.04 10.46 1.13 1.40 7 .54 7 .44 2.36 1.24 --3.63 Dimensions Pad Outline C 0.138 (3.50) E 0.059 (1.50) 0.065 (1.65) 0.460 (11.68) Dimension are in inches (and millimeters). 7º TYP A D 7º TYP G A J H Burr Side 96º 4º 7º TYP B A F 7º TYP MIN Length of Flat K Detail A Mold Split Line BSC* A B C D E F G H J K BSC* * BSC = Basic Spacing between Centers Packing Options Package Type Description Modified MS-013 6-pin Tape and Reel Pack Modified MS-013 6-pin Tube Pack Quantity Added Suffix Industry Standard 1500 500 (50 per tube) RP TP EIA-481-D N/A U Tape and Reel Specification — MS-013 .157 (4.0) .630 (16.0) .512 (13.0) Arbor Hole Dia. .472 (12.0) 12.99 (330) Dimensions are in inches (and millimeters) 0.700 (17.8) Direction of Feed Tube Pack Specification — MS-013 Message Location .020 ± .005 WALL TYP. (0.51 ± 0.13) .108 (2.74) .110 (2.79) .045 (1.14) 90˚ .165 (4.19) .310 (7.87) 6 Interior of the Tube 20.000 ± .030 (508.00 ± 0.76) .005 A .150 (3.81) .225 (5.72) .525 (13.34) A Dimensions are in inches (and millimeters) © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 147 Revised: February 22, 2011