P1800Q22CLRP

Teccor® brand Protection Thyristors Surface Mount Q2L Series (C-Rated) SIDACtor® Device Description The Q2L SIDACtor series provides bidirectional transient voltage protection in a low profile, chip scale package (CSP). The small package QFN (Quad Flatpak No-Lead) is ideal for dense board applications such as DSLAMs, T1/E1/J1 cards, and other telecommunication equipment. Features • RoHS compliant • Chip Scale Package (CSP) sizing • Wide range of IPP ratings including: 500A for 2x10μs GR 1089 waveform 200A for 5x310/10x700μs ITU/YDT waveform 100A for 10x1000μs GR 1089 waveform 150A for 10x560μs TIA-968-A • Bidirectional transient voltage protection • Small footprint (QFN) • Teccor brand SIDACtor technology Agency Approvals AGENCY AGENCY FILE NUMBER E133083 Protection solution to meet • • • • YD/T 950 YD/T 993 YD/T 1082 GR 1089 • IEC 61000-4-5 • ITU K.20/21 • TIA-968-A Electrical Characteristics VDRM @ldrm=5µA Volts Min P0080Q22CLRP P0300Q22CLRP P0640Q22CLRP P0720Q22CLRP P0900Q22CLRP P1100Q22CLRP P1300Q22CLRP P1500Q22CLRP P1800Q22CLRP P2300Q22CLRP P2600Q22CLRP P3100Q22CLRP P3500Q22CLRP P-8C P03C P06C P07C P09C P11C P13C P15C P18C P23C P26C P31C P35C 6 25 58 65 75 90 120 140 170 190 220 275 320 VS @100V/µs Volts Max 25 40 77 88 98 130 160 180 220 260 300 350 400 IH IS IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT=1 amp Volts Max 800 800 800 800 800 800 800 800 800 800 800 800 800 5 5 5 5 5 5 5 5 5 5 5 5 5 Min 35 25 55 50 45 45 40 35 35 30 30 30 25 Capacitance @1MHz, 2V bias pF Max 75 45 85 75 70 70 60 55 50 50 45 45 40 Part Number Marking mAmps mAmps Min 50 50 150 150 150 150 150 150 150 150 150 150 150 • All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. Q2L (C-Rated) Series Specifications are subject to change without notice. • Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VS is measured at 100 V/μs. • Off-state capacitance is measured at 1MHz with a 2 V bias.  Telecom Design Guide www.littelfuse.com ©2006 Littelfuse Teccor® brand Protection Thyristors Surface Mount Surge Ratings Ipp Series 2x10µs Amps Min C 500 1.2x50µs/8x20µs Amps Min 400 10x160µs Amps Min 200 10x560µs Amps Min 150 10x1000µs Amps Min 100 Amps/µs Max 500 di/dt Thermal Considerations Package QFN Symbol TJ TS Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +150 -65 to +150 120 Unit °C °C °C/ W PIN 1 PIN 2 RuJA V-I Characteristics +I tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP IT IS IH -V IDRM VT VDRM VS +V 100 Peak Value tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 tr td -I t – Time (µs) Normalized VS Change Versus Junction Temperature Normalized DC Holding Current Versus Case Temperature Percent of VS Change – % 10 8 6 4 2 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 0 IH (TC = 25 ˚C) 14 12 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 IH 25 ˚C 25 ˚C Ratio of Junction Temperature (TJ) – ˚C Case Temperature (TC) – ˚C 20 40 60 80 100 120 140 160 Q2L (C-Rated) Series Specifications are subject to change without notice. 2 Telecom Design Guide www.littelfuse.com ©2006 Littelfuse Teccor® brand Protection Thyristors Surface Mount Soldering Parameters 260 220 Temperature ( °C) Liquidus 190 150 Soak Stage 0 50 to 150 60 to 90 Time(s) 120 Physical Specifications Terminal Material Lead Solderability Matte Tin-plated Copper ANSI/J-STD-002 Environmental Specifications Operating/Storage Temperature Passive Aging Humidity Aging -40° C to ~ +150°C 125° C, 1000 hours Meet Spec +85°C, 85% R.H. 1000 hours Meet Spec MIL-STD-202 Method 107G +85°C/-40°C 100 times Meet spec MIL-STD-202, Method 215 No Change MIL-STD-883C, Method 2007.1, Condition A No Change Can be A or B Can be A or B Thermal Shock Solvent Resistance Vibration TOP VIEW A J BOTTOM VIEW C E Dimensions B TOP VIEW A J BOTTOM VIEW C E F Dimensions 1.50 (.059”) 2.54 (.100”) Inches Min 0.126 0.126 0.075 0.011 0.088 0.035 0.000 0.004 0.004 0.063 0.045 0.095 0.082 Typ 0.130 0.130 0.079 0.015 0.092 0.039 0.004 0.008 0.008 0.067 0.049 0.099 0.086 Max 0.134 0.134 0.083 0.019 0.096 0.043 0.008 0.012 0.012 0.071 0.053 0.103 0.090 Min 3.200 3.200 1.900 0.285 2.230 0.900 0.000 0.100 0.100 1.610 1.153 2.420 2.080 Millimeters Typ 3.300 3.300 2.000 0.385 2.330 1.000 0.100 0.200 0.200 1.710 1.253 2.520 2.180 Max 3.400 3.400 2.100 0.485 2.430 1.100 0.200 0.300 0.300 1.810 1.353 2.620 2.280 END VIEW B H SIDE VIEW M1 M2 F A B C E F H J K1 K2 M1 M2 N1 N2 1.27 (.050”) N2 N1 K1 H K2 1.50 (.059”) 1.27 (.050”) END VIEW SIDE VIEW M1 M2 Recommended (.100”) Soldering Pad Outline (Reference Only) *Reference Tech Brief (EC642) for soldering recommendations Recommended 2.54 N2 N1 K1 K2 Soldering Pad Outline (Reference Only) Q2L (C-Rated) Series Specifications are subject to change without notice.  Telecom Design Guide www.littelfuse.com ©2006 Littelfuse Teccor® brand Protection Thyristors Surface Mount Part Marking System Part Numbering System Pxxx0Q22CL RP First Line: Product Name (see marking in table) Second Line: Lot number DEVICE TYPE P : SIDACtor MEDIAN VOLTAGE xxx : xxx volts CONSTRUCTION VARIATION 0 : Single SIDACtor chip used as a single device PACKING STYLE RP : Standard: Embossed carrier tape and reel per EIA 481-1, 12mm tape in 13” reel, 5,000 pieces per reel L : RoHS Compliant SURGE Ipp Rating C : 500AMP 2x10µs 100AMP 10x1000µs PACKAGE TYPE Q22 : QFN, 3.3mm x 3.3mm, two leaded package Packaging Package Type QFN Description Embossed Carrier Reel Pack Packing Quantity 5000 Added Suffix RP Industry Standard EIA-481-1 Tape and Reel Specification Symbols N B C A D W1 N C A D W1 Description Reel Diameter Drive Spoke Width Arbor Hole Diameter Drive Spoke Diameter Hub Diameter Reel Inner Width at Hub Pocket Width at bottom Pocket Length at bottom Feed Hole Diameter Pocket Hole Diameter Feed hole position 1 Feed hole position 2 Feed hole center-Pocket hole Pocket Depth Feed Hole Pitch Component Spacing Feed hole center-Pocket hole Carrier Tape Thickness Embossed Carrier Tape Width Cover Tape Width Inches Minimum N/A 0.059 0.504 0.795 1.969 0.488 0.138 0.138 0.059 0.059 0.065 0.400 0.215 0.039 0.153 0.311 0.077 0.010 0.453 0.358 Maximum 12.992 N/A 0.531 N/A N/A 0.567 0.146 0.146 0.063 N/A 0.073 0.408 0.219 0.051 0.161 0.319 0.081 0.014 0.484 0.366 Millimeters Minimum N/A 1.50 12.80 20.20 50.00 12.40 3.50 3.50 1.50 1.50 1.65 10.15 5.45 1.00 3.90 7.90 1.95 0.25 11.50 9.10 Maximum 330.0 N/A 13.50 N/A N/A 14.40 3.70 3.70 1.60 N/A 1.85 10.35 5.55 1.30 4.10 8.10 2.05 0.35 12.30 9.30 A B C D N W1 CARRIER TAPE E1 A0 B0 F 2 EB0 W Reel Dimensio nB Reel Dimensio n D0 D0 P0 P2 T T P0 P2 D1 D1 CARRIER TAPE E1 W0 K0 K0 COVER TAPE P1 COVER TAPE B0 F W0 E2 W P1 A0 D0 D1 E1 E2 A0 TapeDimension ItemItems Tape Dimension s CARRIER TAPE COVER TAPE END CARRIER TAPE COVER TAPE END START F K0 P0 P1 P2 T W W0 START LEADER 400mm MIN TRAILER 160m m MIN TRAILER Tape 160m mandN Leader MI Trailer Dimensions LEADER 400mm MIN Tape Leader and Trailer Dimensions Q2L (C-Rated) Series Specifications are subject to change without notice.  Telecom Design Guide www.littelfuse.com ©2006 Littelfuse