P1804U_L

0XOWLSRUW 6,'$&WRUŠ 'HYLFH RoHS ¨ 1 (R1) 2 (G1) 3 (T1) 6 (T2) 5 (G2) 4 (R2) The multiport line protector is an integrated multichip solution used for protecting multiple twisted pair from overvoltage conditions. Based on a six-pin surface mount SOIC package, it is equivalent to four discrete DO-214AA. This multiport line protector is ideal for densely populated, high-speed line cards that cannot tolerate PCB inefficiencies nor the use of series power resistors. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). Electrical Parameters VDRM Volts 6 25 58 65 75 90 120 140 170 190 220 275 320 VS Volts 25 40 77 88 98 130 160 180 220 260 300 350 400 VDRM Volts 12 50 116 130 150 180 240 280 340 380 440 550 640 VS Volts 50 80 154 176 196 260 320 360 440 520 600 700 800 Part Number * P0084U_L P0304U_L P0644U_L P0724U_L P0904U_L P1104U_L P1304U_L P1504U_L P1804U_L P2304U_L P2604U_L P3104U_L P3504U_L Pins 1-2, 3-2, 4-5, 6-5 Pins 1-3, 4-6 VT Volts 4 4 4 4 4 4 4 4 4 4 4 4 4 IDRM μAmps 5 5 5 5 5 5 5 5 5 5 5 5 5 IS mAmps 800 800 800 800 800 800 800 800 800 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 IH mAmps 50 50 150 150 150 150 150 150 150 150 150 150 150 * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For individual “UA”, “UB”, and “UC” surge ratings, see table below. General Notes: • All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VDRM is measured at IDRM, and VS is measured at 100 V/μs. Surge Ratings in Amps IPP Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps A B C 20 25 50 Amps 150 250 500 Amps 150 250 400 10x160 * 10x160 ** Amps 90 150 200 10x560 * 10x560 ** Amps 50 100 150 5x320 * 9x720 ** Amps 75 100 200 10x360 * 10x1000 * 5x310 * ITSM 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz Amps 75 125 175 Amps 45 80 100 Amps 75 100 200 Amps 20 30 50 di/dt Amps/μs 500 500 500 * Current waveform in μs ** Voltage waveform in μs www.littelfuse.com 3 - 34 © 2006 Littelfuse, Inc. • Telecom Design Guide 0XOWLSRUW 6,'$&WRUŠ 'HYLFH Thermal Considerations Package Modified MS-013 6 5 4 1 2 3 Symbol TJ TS RθJA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +150 -65 to +150 60 Unit °C °C °C/W Capacitance Values pF Pin 1-2 / 3-2 (4-5 / 6-5) Tip-Ground, Ring-Ground MIN MAX 25 155 25 155 35 285 15 140 15 140 25 250 40 60 40 155 55 155 35 60 50 145 50 145 35 55 35 55 45 135 30 50 30 115 45 115 25 45 25 105 40 105 25 40 25 95 35 95 25 35 25 90 35 90 25 35 25 85 30 85 20 35 20 85 30 85 20 35 20 80 30 80 20 35 20 75 25 75 pF Pin 1-3 (4-6) Tip-Ring MIN 15 15 20 10 10 10 20 20 30 20 20 25 20 20 25 15 15 25 15 15 20 15 15 20 10 10 15 10 10 15 10 10 15 10 10 15 10 10 15 MAX 90 90 165 90 90 145 35 90 90 35 85 85 30 30 80 30 65 65 25 60 60 25 55 55 20 50 50 20 50 50 20 50 50 20 45 45 20 45 45 Part Number P0084UAL P0084UBL P0084UCL P0304UAL P0304UBL P0304UCL P0644UAL P0644UBL P0644UCL P0724UAL P0724UBL P0724UCL P0904UAL P0904UBL P0904UCL P1104UAL P1104UBL P1104UCL P1304UAL P1304UBL P1304UCL P1504UAL P1504UBL P1504UCL P1804UAL P1804UBL P1804UCL P2304UAL P2304UBL P2304UCL P2604UAL P2604UBL P2604UCL P3104UAL P3104UBL P3104UCL P3504UAL P3504UBL P3504UCL Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. Telecom Design Guide • © 2006 Littelfuse, Inc. 3 - 35 www.littelfuse.com 5+&#%VQT &GXKEGU 0XOWLSRUW 6,'$&WRUŠ 'HYLFH +I IPP – Peak Pulse Current – %IPP IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value tr = r ise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 tr td t – Time (μs) -I V-I Characteristics tr x td Pulse Waveform Percent of VS Change – % 10 IH (TC = 25 ˚C) 14 12 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 ˚C 25 ˚C Ratio of Case Temperature (TC) – ˚C Junction Temperature (TJ) – ˚C Normalized VS Change versus Junction Temperature Normalized DC Holding Current versus Case Temperature www.littelfuse.com 3 - 36 © 2006 Littelfuse, Inc. • Telecom Design Guide