P1900MEL

SIDACtor ® Protection Thyristors High Surge Current Protection 5kA Series - TO-218 Description The 5kA Series are SIDACtor® devices designed to protect equipment located in high exposure environments from severe overvoltage transients. Packaged in a robust TO-218 package, the 5kA Series is ideal for use in CATV amplifiers, Telecom Base Station equipment and Cell Towers. Features and Benefits Low voltage overshoot Low on-state voltage Agency Approvals Agency Agency File Number E133083 Rugged TO-218 package 5000A 8x20 μs surge rating Does not degrade with use Fails short circuit when surged in excess of rating Pinout Designation 2 Applicable Global Standards TIA-968-A TIA-968-B ITU K.20/21 Enhanced Level 1 2 3 (No Connection) GR 1089 Intra-building IEC 61000-4-5 YD/T 1082 YD/T 993 YD/T 950 ITU K.20/21 Basic Level GR 1089 Inter-building Schematic Symbol 1 2 Electrical Characteristics VDRM @lDRM=5μA V min P1500MEL P1900MEL P2300MEL P1500ME P1900ME P2300ME 140 140 180 VS @100V/μs V max 180 220 260 IH IS IT VT @IT=2.2 A V max 4 4 4 Capacitance @1MHz, 2V bias pF min pF max 400 400 350 650 650 600 Part Number Marking mA min mA max A max 50 50 50 800 800 800 2.2/25 2.2/25 2.2/25 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). - IT is a free air rating and heat sink is at 25A © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 188 Revised: February 22, 2011 SIDACtor ® Protection Thyristors High Surge Current Protection Surge Ratings IPP Series 8x20 1.2x50 1 2 ITSM 50 / 60 Hz A min 400 di/dt A/μs max 630 Notes: 1 Current waveform in μs 2 Voltage waveform in μs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40°C < TJ < A min E 5000 Thermal Conditions Package TO-218 2 Symbol TJØ TS TC R0JC* Parameter Operating Junction Temperature Range Storage Temperature Range Maximum Case Temperature Thermal Resistance: Junction to Case Thermal Resistance: Junction to Ambient Value Unit °C °C 100 1.7 56 °C °C/W °C/W 1 2 3 (No Connection) R0JA *R0JC rating assumes the use of a heat sink and on state mode for extended time at 25 A, with average power dissipation of 29.125 W. V-I Characteristics +I tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP tr = r ise time to peak value td = decay time to half value IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value Waveform = tr x td 50 Half Value 0 0 -I tr td t – Time (μs) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 2.0 14 Percent of VS Change – % 12 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 IH (TC = 25ºC) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 °C 25°C Junction Temperature (TJ) – °C Ratio of Case Temperature (TC) - ºC © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 189 Revised: February 22, 2011 SIDACtor ® Protection Thyristors High Surge Current Protection Soldering Parameters Pb-Free assembly (see Fig. 1) Reflow Condition - Temperature Min (Ts(min)) Figure 1 TP Ramp-up tP Critical Zone TL to TP Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. 3°C/sec. Max. 3°C/sec. Max. 60-150 secs. Temperature Average ramp up rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) TL TS(max) Preheat tL Ramp-down TS(min) tS Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) Ramp-down Rate Time 25°C to Peak Temp (TP) Do not exceed 30 secs. Max. 6°C/sec. Max. 8 min. Max. 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Lead Material Terminal Finish Body Material Copper Alloy 100% Matte-Tin Plated Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC JEDEC, JESD22-A-101 JEDEC, JESD22-A-101 -65°C, 1008 hrs. 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 JEDEC, JESD22-A-102 Temp Cycling UL recognized epoxy meeting flammability classification 94V-0 Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Autoclave (Pressure Cooker Test) Resistance to Solder Heat Moisture Sensitivity Level Part Numbering Part Marking P xxx 0 ME L TYPE P: SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE RoHS COMPLIANT IPP RATING XXXXXXX Part Number Code (Refer to Electrical Characteristics Table) xxxxx Date Code © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 190 Revised: February 22, 2011 SIDACtor ® Protection Thyristors High Surge Current Protection Dimensions — TO-218 TC Measurement Point B U DIA. Tab is connected to PIN 2 C D Dimensions A B C D E F G H J K L M N P R U W Inches Min 0.810 0.610 0.178 0.055 0.487 0.635 0.022 0.075 0.575 0.211 0.422 0.058 0.045 0.095 0.008 0.161 0.085 Max 0.835 0.630 0.188 0.070 0.497 0.655 0.029 0.095 0.625 0.219 0.437 0.068 0.055 0.115 0.016 0.165 0.095 Millimeters Min 20.57 15.49 4.52 1.40 12.37 16.13 0.56 1.91 14.61 5.36 10.72 1,47 1.14 2.41 0.20 4.1 2.17 Max 21.21 16.00 4.78 1.78 12.62 16.64 0.74 2.41 15.88 5.56 11.10 6.73 1.40 2.92 0.41 4.2 2.42 A F E W PIN 3 P PIN 1 PIN 2 R M Q N 3 Times K L Notes: J H G Mold flash shall not exceed 0.13 mm per side. Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Pin 3 has no connection. Tab is non-isolated (connects to middle pin). Packing Options Package Type Packing Options Quantity Added Suffix Industry Standard Description M 250(25 per TO-218 (ME) tube/10 tubes per Tube Pack box) N/A N/A Tube Pack Specification — TO-218 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 191 Revised: February 22, 2011