P3500Q22CLRP

SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Q2L Series - 3.3x3.3 QFN Description Q2L Series 3.3x3.3 QFN are low capacitance SIDACtor® devices designed to protect high density broadband equipment from damaging overvoltage transients. The series provides a low profile, chip scale surface mount solution that enables broadband equipment to comply with global regulatory standards while limiting the impact to broadband signals and board space. Features and Benefits Agency Approvals Agency Agency File Number E133083 Low capacitance Low voltage overshoot Low on-state voltage Applicable Global Standards Does not degrade with use Fails short circuit when surged in excess of ratings Pinout Designation Not Applicable Schematic Symbol Level Electrical Characteristics VDRM Part Number P0080Q22CLRP P0300Q22CLRP P0640Q22CLRP P0720Q22CLRP P0900Q22CLRP P1100Q22CLRP P1300Q22CLRP P1500Q22CLRP P1800Q22CLRP P2300Q22CLRP P2600Q22CLRP P3100Q22CLRP P3500Q22CLRP Marking P-8C P03C P06C P07C P09C P11C P13C P15C P18C P23C P26C P31C P35C @lDRM=5μA V min 6 25 58 65 75 90 120 140 170 190 220 275 320 VS @100V/μs V max 25 40 77 88 98 130 160 180 220 260 300 350 400 IH IS IT A max 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT@IT = 2.2 Amps V max 5 5 5 5 5 5 5 5 5 5 5 5 5 Capacitance @1MHz, 2V bias pF min 35 25 55 50 45 45 40 35 35 30 30 30 25 pF max 75 45 85 75 70 70 60 55 50 50 45 45 40 mA min mA max 50 50 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 63 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Surge Ratings Ipp Series C 2x10μs A min 500 1.2x50μs/8x20μs A min 400 10x160μs A min 200 10x560μs A min 150 10x1000μs A min 100 ITSM 50 / 60 Hz A min 30 Amps/μs max 500 di/dt Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40°C < TJ < Thermal Considerations Package 3.3 x 3.3 QFN Symbol TJ TS R0JA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value Unit °C °C 120 °C/W V-I Characteristics tr x td Pulse Waveform +I IPP – Peak Pulse Current – %IPP IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value tr = r ise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 -I tr td t – Time (μs) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 14 2.0 Percent of VS Change – % 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 IH (TC = 25ºC) 12 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 °C 25°C Ratio of Junction Temperature (TJ) – °C Case Temperature (TC) - ºC © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 64 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pb-Free assembly (see Fig. 1) Figure 1 TP Ramp-up tP Critical Zone TL to TP Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Temperature Average ramp up rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) TL TS(max) Preheat 3°C/sec. Max. 3°C/sec. Max. 60-150 secs. tL Ramp-down TS(min) tS Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) Ramp-down Rate Time 25°C to Peak Temp (TP) Do not exceed 30 secs. Max. 6°C/sec. Max. 8 min. Max. 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC JEDEC, JESD22-A-101 JEDEC, JESD22-A-101 -65°C, 1008 hrs. 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Physical Specifications Lead Material Terminal Finish Body Material Copper Alloy Temp Cycling 100% Matte-Tin Plated UL recognized epoxy meeting flammability classification 94V-0 Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Resistance to Solder Heat Moisture Sensitivity Level Dimensions — 3.3x3.3 QFN BOTTOM VIEW C J E TOP VIEW A Dimensions A B C E F H J K1 K2 M1 M2 N1 N2 Inches Min 0.126 0.126 0.075 0.011 0.088 0.035 0.000 0.004 0.004 0.063 0.045 0.095 0.082 Max 0.134 0.134 0.083 0.019 0.096 0.043 0.008 0.012 0.012 0.071 0.053 0.103 0.090 Millimeters Min 3.200 3.200 1.900 0.285 2.230 0.900 0.000 0.100 0.100 1.610 1.153 2.420 2.080 Max 3.400 3.400 2.100 0.485 2.430 1.100 0.200 0.300 0.300 1.810 1.353 2.620 2.280 B F END VIEW H SIDE VIEW 1.50 (.059”) 1.27 (.050”) 2.54 (.100”) N2 N1 K1 M1 M2 K2 Recommended Soldering Pad Outline (Reference Only) © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 65 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Part Numbering Part Marking Terminals on Back P xxx 0 Q22 C L RP TYPE P=SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE REEL PACK RoHS COMPLIANT IPP RATING XXXX XXXXX Part Marking Code Date code (Refer to Electrical Characteristics Table) Packing Options Package Type Q22 Description 3.3x3.3 QFN Tape and Reel Pack Quantity 5000 Added Suffix RP Industry Standard EIA-481-D Tape and Reel Specifications — 3.3x3.3 QFN Reel Dimension Symbols C A D B W1 N Tape Leader and Trailer Dimensions END CARRIER TAPE COVER TAPE START A B C D N W1 A0 B0 D0 D1 E1 E2 F TRAILER 160mm MIN LEADER 400mm MIN Tape Dimension Items K0 P0 P1 D0 T P0 P2 CARRIER TAPE D1 E1 P2 T W W0 W0 K0 COVER TAPE B0 F E2 W P1 A0 Min Max Min Reel Diameter N/A 12.992 N/A Drive Spoke Width 0.059 N/A 1.50 Arbor Hole Diameter 0.504 0.531 12.80 Drive Spoke Diameter 0.795 N/A 20.20 Hub Diameter 1.969 N/A 50.00 Reel Inner Width at Hub 0.488 0.567 12.40 Pocket Width at Bottom 0.138 0.146 3.50 Pocket Length at Bottom 0.138 0.146 3.50 Feed Hole Diameter 0.059 0.063 1.50 Pocket Hole Diameter 0.059 N/A 1.50 Feed Hole Position 1 0.065 0.073 1.65 Feed Hole Position 2 0.400 0.408 10.15 Feed Hole Center 0.215 0.219 5.45 Pocket Hole Center 2 Pocket Depth 0.039 0.051 1.00 Feed Hole Pitch 0.153 0.161 3.90 Component Spacing 0.311 0.319 7 .90 Feed Hole Center 0.077 0.081 1.90 Pocket Hole Center 1 Carrier Tape Thickness 0.010 0.014 0.25 Embossed Carrier 0.453 0.484 11.50 Tape Width Cover Tape Width 0.358 0.366 9.10 Description Inches Millimeters Max 330.0 N/A 13.50 N/A N/A 14.40 3.70 3.70 1.60 N/A 1.85 10.35 5.55 1.30 4.10 8.10 2.05 0.35 12.30 9.30 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 66 Revised: February 22, 2011