QXX35RH5

35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Qxx30xHx & Qxx35xx & Qxx35xHx Series Description ® 30 Amp / 35 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Features & Benefits • RoHS Compliant Agency Approval Agency ® Agency File Number FASTPAK & L Package: E71639 • Glass – passivated junctions • Voltage capability up to 8 00V • Surge capability up to 350A • Electrically isolated package “FASTPAK” & “L - Package” are UL recognized for 2500Vrms Main Features Applications Symbol IT(RMS) VDRM /VRRM IGT (Q1) Value 30 & 35 400 to 800 50 Unit A V mA Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol MT2 G MT1 Absolute Maximum Ratings —Standard Triac Symbol IT(RMS) ITSM I2t di/dt IGTM PG(AV) Tstg TJ Note: xx = voltage Parameter RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t Value for fusing Critical rate of rise of on-state current (IG = 200mA with ≤ 0.1µs rise time) Peak gate trigger current Average gate power dissipation Storage temperature range Operating junction temperature range f = 120 Hz tp ≤ 10 μs IGT ≤ IGTM Qxx35P5 f = 50 Hz f = 60 Hz TC = 55°C t = 20 ms t = 16.7 ms tp = 8.3 ms TJ = 125°C TJ = 125°C TJ = 125°C Value 35 300 350 508 100 2 0.5 -40 to 125 -25 to 125 Unit A A A2s A/μs A W °C °C Qxx30xHx & Qxx35xx & Qxx35xHx Series 137 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Absolute Maximum Ratings — Alternistor Triac (3 Quadrants) Symbol IT(RMS) ITSM I2t di/dt IGTM PG(AV) Tstg TJ Parameter RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t Value for fusing Critical rate of rise of on-state current (IG = 200mA with ≤ 0.1µs rise time) Peak gate trigger current Average gate power dissipation Storage temperature range Operating junction temperature range f = 120 Hz tp ≤ 10 μs IGT ≤ IGTM Qxx35RH5/Qxx35NH5 Qxx30LH5 f = 50 Hz f = 60 Hz TC = 90°C TC = 50°C t = 20 ms t = 16.7 ms tp = 8.3 ms TJ = 125°C TJ = 125°C TJ = 125°C Value 35 30 290 350 508 100 2 0.5 -40 to 150 -25 to 125 Unit A A A2s A/μs A W °C °C Electrical Characteristics (TJ = 25°C, unless otherwise specified) —Standard Triac Symbol IGT VGT VGD IH dv/dt (dv/dt)c tgt VD = VDRM RL = 3.3 kΩ TJ = 110°C IT = 400mA VD = VDRM Gate Open TJ = 125°C (di/dt)c = 18.9 A/ms TJ = 125°C IG = 2 x IGT PW = 15µs IT = 49.5A(pk) 600V 800V Test Conditions I – II – III VD = 12V RL = 30 Ω IV I – II – III ALL Quadrant MAX. TYP . MAX. MIN. MAX. MIN. TYP . TYP . Qxx35P5 50 120 2.75 0.2 50 475 400 5 3 Unit mA V V mA V/μs V/µs µs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants) Symbol IGT VGT VGD IH dv/dt (dv/dt)c Test Conditions I – II – III I – II – III I – II – III Quadrant MAX. MAX. MIN. MAX. 400V 600V MIN. MIN. Qxx35RH5 Qxx35NH5 Qxx30LH5 50 2 0.2 75 475 400 20 Unit mA V V mA V/μs V/µs VD = 12V RL = 30 Ω VD = VDRM RL = 3.3 kΩ TJ = 125°C IT = 400mA VD = VDRM Gate Open TJ = 125°C (di/dt)c = 18.9 A/ms TJ = 125°C 35A device IG = 2 x IGT PW = 15µs IT = 49.5A(pk) 30A device IG = 2 x IGT PW = 15µs IT = 42.4A(pk) tgt TYP . 3 µs Note: xx = voltage Qxx30xHx & Qxx35xx & Qxx35xHx Series 138 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Static Characteristics Symbol VTM Test Conditions 35A device ITM = 49.5A tp = 380 µs 30A device ITM = 42.4A tp = 380 µs Qxx35P5 VD = VDRM / VRRM Qxx35R/NH5 Qxx30LH5 TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C 600 - 800V 600 - 800V 400 - 600V 400 - 600V MAX. MAX. MAX. Value 1.5 1.4 100 5 10 2 Unit V μA mA μA mA IDRM IRRM Thermal Resistances Symbol Parameter Qxx35P5 Rθ(J-C) Junction to case (AC) Qxx35RH5 / Qxx35NH5 Qxx30LH5 Rθ(J-A) Note: xx = voltage Value 1.50 0.85 2.30 45 50 Unit °C/W Junction to ambient Qxx35RH5 Qxx30LH5 °C/W Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 MT2 (-) Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature 4.0 MT2 POSITIVE (Positive Half Cycle) + MT2 Ratio of IGT/IGT (TJ = 25°C) I GT GATE MT1 (+) I GT GATE MT1 3.0 I GT (-) REF MT2 I GT GATE MT1 REF QII QI QIII QIV (+) REF MT2 I GT GATE MT1 REF 2.0 + IGT 1.0 MT2 NEGATIVE (Negative Half Cycle) - 0.0 -40 -15 10 35 60 85 110 +125 Junction Temperature - °C NOTE: Alternistors will not operate in QIV Note: Alternistors will not operate in QIV Qxx30xHx & Qxx35xx & Qxx35xHx Series 139 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Figure 3: Normalized DC Holding Current vs. Junction Temperature 4.0 Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 2.0 Ratio of VGT/VGT(Tj=25°C) Ratio of IIH/IIH (Tj=25°C) 3.0 1.5 2.0 1.0 1.0 0.5 0.0 -40 -15 10 35 60 85 110 + 125 0.0 -40 -15 10 35 60 85 110 +125 Junction Temperature - °C Junction Temperature - °C Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 45 Figure 6: Maximum Allowable Case Temperature vs. On-State Current 130 Average On-State Power Dissipation [PD (AV)] - Watts 35 30 25 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 Max Allowable Case Temperature (TC) - °C 40 120 110 100 90 Qxx35P5 80 70 60 50 Qxx30LH5 Qxx35RH5 Qxx35NH5 0 5 10 15 20 25 30 35 40 RMS On-State Current [IT(RMS)] - AMPS Note: xx = voltage RMS On-State Current [IT(RMS)] - AMPS Figure 7: On-State Current vs. On-State Voltage (Typical) 90 Positive or Negative Instantaneous On-State Current (IT) - AMPS 80 70 TC = 25°C 60 50 40 30 20 10 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Positive or Negative Instantaneous On-State Voltage (VT) - Volts Qxx30xHx & Qxx35xx & Qxx35xHx Series 140 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Figure 8: Surge Peak On-State Current vs. Number of Cycles 1000 Peak Surge (Non-repetitive) On-State Current (ITSM) – Amps Qxx35RH5 Qxx35NH5 Qxx35P5 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State [IT(RMS)]: Max Rated Value at Specific Case Temperature Notes: 1) Gate control may be lost during and immediately following surge current interval. 2) Overload may not be repeated until junction temperature has returned to steady-state rated value. 100 Qxx30LH5 10 1 1 10 100 1000 Surge Current Duration – Full Cycles Note: xx = voltage Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus Temp) (TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Pb – Free assembly TP Temperature tP Ramp-up 150°C 200°C 60 – 180 secs 5°C/second max 5°C/second max 217°C 60 – 150 seconds 260 +0/-5 TL TS(max) tL Preheat Preheat Ramp-do Ramp-down TS(min) tS time to peak temperature 25 Time Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peak Temperature (TP) Do not exceed °C 20 – 40 seconds 5°C/second max 8 minutes Max. 280°C Qxx30xHx & Qxx35xx & Qxx35xHx Series 141 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Physical Specifications Terminal Finish Body Material Terminal Material 100% Matte Tin-plated. UL recognized epoxy meeting flammability classification 94V-0. Copper Alloy Environmental Specifications Test AC Blocking Temperature Cycling Temperature/ Humidity High Temp Storage Low-Temp Storage Thermal Shock Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Autoclave Resistance to Solder Heat Solderability Lead Bend Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT O E A MT2 B C D 7.01 .276 13.36 .526 P 8.13 .320 AREA (REF.) 0.17 in2 Dimension A B C D E F G H J K Inches Min 0.380 0.105 0.230 0.590 0.142 0.110 0.540 0.025 0.195 0.095 0.060 0.085 0.018 0.178 0.045 0.038 Max 0.420 0.115 0.250 0.620 0.147 0.130 0.575 0.035 0.205 0.105 0.075 0.095 0.024 0.188 0.060 0.048 Millimeters Min 9.65 2.67 5.84 14.99 3.61 2.79 13.72 0.64 4.95 2.41 1.52 2.16 0.46 4.52 1.14 0.97 Max 10.67 2.92 6.35 15.75 3.73 3.30 14.61 0.89 5.21 2.67 1.91 2.41 0.61 4.78 1.52 1.22 F G L H R NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB K J MT1 MT2 GATE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). L M N O P R Qxx30xHx & Qxx35xx & Qxx35xHx Series 142 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O E A P 8.13 .320 AREA (REF.) 0.17 in2 Dimension A 13.36 .526 7.01 .276 Inches Min 0.380 0.105 0.230 0.590 0.142 0.110 0.540 0.025 0.195 0.095 0.060 0.085 0.018 0.178 0.045 0.038 Max 0.420 0.115 0.250 0.620 0.147 0.130 0.575 0.035 0.205 0.105 0.075 0.095 0.024 0.188 0.060 0.048 Millimeters Min 9.65 2.67 5.84 14.99 3.61 2.79 13.72 0.64 4.95 2.41 1.52 2.16 0.46 4.52 1.14 0.97 Max 10.67 2.92 6.35 15.75 3.73 3.30 14.61 0.89 5.21 2.67 1.91 2.41 0.61 4.78 1.52 1.22 B C D B C D E F G F G L H R H J K K J MT1 MT2 GATE N M Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). L M N O P R Dimensions — TO-263 (N-Package) — D2 Pak Surface Mount TC MEASURING POINT B MT2 V C E AREA: 0.11 IN2 Dimension 8.41 .331 Inches Min 0.360 0.380 0.178 0.025 0.045 0.060 0.095 0.092 0.018 0.090 0.590 0.035 0.002 0.040 Max 0.370 0.420 0.188 0.035 0.060 0.075 0.105 0.102 0.024 0.110 0.625 0.045 0.010 0.070 Millimeters Min 9.14 9.65 4.52 0.64 1.14 1.52 2.41 2.34 0.46 2.29 14.99 0.89 0.05 1.016 Max 9.40 10.67 4.78 0.89 1.52 1.91 2.67 2.59 0.61 2.79 15.88 1.14 0.25 1.78 A B C D E A S 7.01 .276 W K U GATE G J 8.13 .320 MT1 D F 11.68 .460 2.16 .085 H F G H J K S V U W 7.01 .276 16.89 .665 8.89 .350 7.01 .276 1.40 .055 3.81 .150 2.03 .080 6.60 .260 Qxx30xHx & Qxx35xx & Qxx35xHx Series 143 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Dimensions — TO-3 Fastpak (P Package) — Isolated Mounting Tab A B D Dimension A B C D ΦG Inches Min 1.531 1.177 0.843 0.780 0.783 0.874 0.161 0.386 0.508 0.079 0.047 0.307 0.372 0.043 0.315 0.098 0.846 0.244 0.106 0.321 0.321 0.220 0.246 0.246 0.183 0.120 Max 1.543 1.185 0.850 0.795 0.791 0.906 0.169 0.465 0.587 0.087 0.055 0.319 0.396 0.059 0.331 0.106 0.886 0.256 0.130 0.329 0.329 0.228 0.254 0.254 0.191 0.130 Millimeters Min 38.90 29.90 21.40 19.80 19.90 22.20 4.10 9.80 12.90 2.00 1.20 7 .80 9.45 1.10 8.00 2.50 21.50 6.20 2.70 8.15 8.15 5.60 6.25 6.25 4.65 3.05 Max 39.20 30.10 21.60 20.20 20.10 23.00 4.30 11.80 14.90 2.20 1.40 8.10 10.05 1.50 8.40 2.70 22.50 6.50 3.30 8.35 8.35 5.80 6.45 6.45 4.85 3.30 MT2 F MT1 Gate E C I Φ J (MT1, MT2) W ML 5-ΦN S T U J V H E F G H I J K L M N O P Q R S T(MT1) T(MT2) T(Gate) U(MT1) U(MT1) U(Gate) V W TC Measuring Point R Φ K (Gate) Q O P Thickness of all three copper-alloy terminals is .032”(0.81mm) 0.175 0.185 4.45 4.70 Maximum torque to be applied to mounting tab is 8 in-lbs (0.904 Nm) Product Selector Part Number Qxx35P5 Qxx35RH5 Qxx35NH5 Qxx30LH5 Note: xx = Voltage Voltage 400V X X X 600V X X X X 800V X Gate Sensitivity Quadrants I – II – III 50 mA 50 mA 50 mA 50 mA IV 120 mA (TYP) IT(RMS) 35A 35A 35A 30A Type Standard Triac Alternistor Triac Alternistor Triac Alternistor Triac Package FASTPACK TO-220R TO-263 D2-PAK TO-220L Qxx30xHx & Qxx35xx & Qxx35xHx Series 144 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs Teccor® brand Thyristors Packing Options Part Number Qxx30LH5 Qxx30LH5TP Qxx35RH5 Qxx35RH5TP Qxx35NH5TP Qxx35NH5RP Qxx35P5 Note: xx = Voltage Marking Qxx30LH5 Qxx30LH5 Qxx35RH5 Qxx35RH5 Qxx35NH5 Qxx35NH5 Qxx35P5 Weight 2.20 g 2.20 g 2.20 g 2.20 g 1.60 g 1.60 g 21.4 g Packing Mode Bulk Tube Bulk Tube Tube Embossed Carrier Bulk Base Quantity 500 500 (50 per tube) 500 500 (50 per tube) 500 (50 per tube) 500 200 TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) Gate MT1 0.945 (24.0) 0.827 (21.0) * * Cover tape MT2 12.99 (330.0) Dimensions are in inches (and millimeters). 0.512 (13.0) Arbor Hole Dia. 1.01 (25.7) Direction of Feed Part Numbering System Part Marking System FASTPAK (P Package) SENSITIVITY & TYPE Standard Triac 5 : 50mA (QI, II, III) Alternistor Triac H5 : 50mA (QI, II, III) PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2-PAK) P : FASTPAK Q6030LH5 Q 60 35 P 5 DEVICE TYPE Q : Triac or Alternistor Triac VOLTAGE 40 : 400V 60 : 600V 80 : 800V CURRENT 30 : 30A 35 : 35A Q6030RH5 YM ® Q6035P5 ® YMXXX MY ® Qxx30xHx & Qxx35xx & Qxx35xHx Series 145 Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.