RLD30P185UF

POLYFUSE® RESETTABLE FUSES WICKMANN No. RLD30 Radial Leaded, 30V Standard UL 1434 1st Edition CSA C22.2 No.0, CSA TIL No. CA-3A Specifications Packaging Code and Info A: Bulk (Qty.: see table below) F: Tape/Ammopack (Qty.: see table below) Approvals cULus Recognized: File No. E 191571 TÜV: File No. R 50017428 Materials Insulating Mat.: Cured Epoxy Polymer, UL 94V0 Round Pins: Copper alloy, tin plated Features Low voltage (30Vdc) overcurrent protection Low resistance and power dissipation High hold currents Low trip-to-hold current ratios Internationally approved E Temperature Tripped Device Surface Temperature in Tripped State 125°C Max. Temperature Operating / Storage Temperature -40ºC to +85ºC (see de-rating table) Dimensions (mm) A Humidity Ageing +85 º C, 85% RH, 1000 hrs., ± 5% typical resistance change MARKING Wide range of applications, including general electronics, computers, peripherals and automotive electronics Passive Ageing +85ºC, 1000 hrs., ± 5% typical resistance change B WebLinks Data Sheet - latest version www.wickmannusa.com/products/rld30.pdf Thermal Shock -40°C to +125°C, 10 times, ±10% typical resistance change (MIL-STD-202F, Method 107G) D C F Approval Certificates www.wickmannusa.com/approvals Solvent Resistance MIL-STD-202, Method 215F, no change Packaging www.wickmannusa.com/pack Solderability Wave/Hand: 260ºC, ≤ 3 sec. (MIL-STD-202, Method 208E) Dimensions Legend Rating A (max.) B (max.) C (typ.) D (min.) E (max.) 900 mA / 30V 1.10 A / 30V 1.35 A / 30V 1.60 A / 30V 1.85 A / 30V 2.50 A / 30V 3.00 A / 30V 4.00 A / 30V 5.00 A / 30V 6.00 A / 30V 7.00 A / 30V 8.00 A / 30V 9.00 A / 30V 7.4 7.4 8.9 8.9 10.2 11.4 11.4 14.0 14.0 16.5 19.1 21.6 24.1 12.2 14.2 13.5 15.2 15.7 18.3 17.3 20.1 24.9 24.9 26.7 29.2 29.7 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 10.2 10.2 10.2 10.2 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 F (Ø) 0.51 0.51 0.51 0.51 0.51 0.51 0.81 0.81 0.81 0.81 0.81 0.81 0.81 Packaging Quantity Bulk Tape 500 500 500 500 500 500 500 100 100 100 100 100 100 2 000 2 000 2 000 2 000 2 000 2 000 2 000 1 000 1 000 1 000 1 000 1 000 1 000 Marking “ P ” , Voltage, Current Code, Lot Code cURus 900mA 1.10A 1.35A 1.60A 1.85A 2.50A 3.00A 4.00A 5.00A 6.00A 7.00A 8.00A 9.00A I hold = I trip = Vmax = I max = P090U P110U P135U P160U P185U P250U P300U P400U P500U P600U P700U P800U P900U 1.80 2.20 2.70 3.20 3.70 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 30 30 30 30 30 30 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 0.6 0.7 0.8 0.9 1.0 1.2 2.0 2.5 3.0 3.5 3.8 4.0 4.2 4.50 5.50 6.75 8.00 9.25 12.50 15.00 20.00 25.00 30.00 35.00 40.00 40.00 5.9 6.6 7.3 8.0 8.7 10.3 10.8 12.7 14.5 16.0 17.5 18.8 20.0 0.070 0.050 0.040 0.030 0.020 0.020 0.010 0.010 0.005 0.005 0.005 0.005 0.005 0.220 0.170 0.130 0.110 0.090 0.070 0.080 0.050 0.050 0.040 0.030 0.020 0.020 • • • • • • • • • • • • • Hold current: maximum current device will pass without tripping in 20°C still air. Trip current: minimum current at which the device will trip in 20°C still air. Maximum voltage device can withstand without damage at rated current (I max). Maximum fault current device can withstand without damage at rated voltage (Vmax). Pd = Power dissipated from device when in the tripped state at 20°C still air. Rmin = Minimum resistance of device in initial (un-soldered) state. R1max = Maximum resistance of device at 20°C measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Order Information 030121 Qty. OrderNumber Series RLD30 Model Code Pack. Code Specifications are subject to change without notice. WebSite: www.wickmann.com • Europe Tel: +49 (2302) 662-107 E-mail: sales@wickmann.com • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: service@wickmannusa.com E-mail: sales@wickmann.com.hk TÜV 100% 20 (68 Permissible continuous operating current is ≤ 100% at ambient temperature of 20 ºC (68ºF). 1 00 Hold Model Trip Voltage max. Fault max. Power max. TimeCurrent Code Current Rating Current Dissipation to-trip I hold Itrip (A) (Vdc) Imax. (A) Pd (W) (A) (s) Resistance R min. R 1max. min. (Ω) max. (Ω) Approvals • • • • • • • • • • • • • POLYFUSE® RESETTABLE FUSES WICKMANN No. RLD30 Time-to-trip Characteristics A B C D E F G H I JK L M Rating 900mA / 30V 1.10A / 30V 1.35A / 30V 1.60A / 30V 1.85A / 30V 2.50A / 30V 3.00A / 30V 4.00A / 30V 5.00A / 30V 6.00A / 30V 7.00A / 30V 8.00A / 30V 9.00A / 30V Curve A B C D E F G H I J K L M Time (sec.) I Fault (Amp) ( Amp) Thermal Derating Chart Rating Temperature (Amp) I hold (Amp) / Ambient Operating Temperature -40°C -20°C 0°C 23°C 40°C 1.31 1.60 1.96 2.32 2.68 3.63 4.35 5.80 7.25 8.70 10.15 11.60 13.05 1.17 1.43 1.76 2.08 2.41 3.25 3.90 5.20 6.50 7.80 9.10 10.40 11.70 1.04 1.27 1.55 1.84 2.13 2.88 3.45 4.60 5.75 6.90 8.05 9.20 10.35 0.90 1.10 1.35 1.60 1.85 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 0.75 0.91 1.12 1.33 1.54 2.08 2.49 3.32 4.15 4.98 5.81 6.64 7.47 50°C 0.69 0.85 1.04 1.23 1.42 1.93 2.31 3.08 3.85 4.62 5.39 6.16 6.93 60°C 0.61 0.75 0.92 1.09 1.26 1.70 2.04 2.72 3.40 4.08 4.76 5.44 6.12 70°C 0.55 0.67 0.82 0.98 1.13 1.53 1.83 2.44 3.05 3.66 4.27 4.88 5.49 85°C 0.47 0.57 0.70 0.83 0.96 1.30 1.56 2.08 2.60 3.12 3.64 4.16 4.68 900mA / 30V 1.10A / 30V 1.35A / 30V 1.60A / 30V 1.85A / 30V 2.50A / 30V 3.00A / 30V 4.00A / 30V 5.00A / 30V 6.00A / 30V 7.00A / 30V 8.00A / 30V 9.00A / 30V 030121 WebSite: www.wickmann.com • Europe Tel: +49 (2302) 662-107 E-mail: sales@wickmann.com • Americas Tel: +1 (404) 699-7820 • Asia Tel: +852 26 14-1108 E-mail: service@wickmannusa.com E-mail: sales@wickmann.com.hk