S4X8TS1

Teccor® brand Thyristors Silicon Controlled Rectifiers SxX8xSx EV Series 0.8A Sensitive SCR Description New device series offers high static dv/dt and lower turn off (tq) sensitive SCR with its small die planar construction SCRs junctions are glass-passivated to ensure long term reliability and parametric stability. Features mount packages Main Features Symbol IT(RMS) VDRM / VRRM I Value 0.8 400 to 800 5 to 200 Unit A V μA < 25 μsec q ) capability > 10Amps ( VDRM / VRRM ) capability - up to 800V Schematic Symbol A microprocessor interface Applications x G applications. K Absolute Maximum Ratings Symbol Parameter TO-92 IT(RMS) RMS on-state current (full sine wave) SOT-89 SOT-223 TO-92 IT(AV) Average on-state current SOT-89 SOT-223 TO-92 SOT-89 SOT-223 tp = 10 ms tp = 8.3 ms TO-92 SOT-89 SOT-223 tp = 10 μs — — — TC = 55°C TC = 60°C TL = 60°C TC = 55°C TC = 60°C TL = 60°C F= 50Hz F= 60Hz F = 50 Hz F = 60 Hz TJ = 125°C TJ = 125°C TJ = 125°C — — Value 0.8 0.8 0.8 0.51 0.51 0.51 8 10 0.32 0.41 50 1.0 0.1 -40 to 150 -40 to 125 Unit A A A A A A A A A 2s A2s A/μs A W °C ITSM I 2t di/dt I P Tstg TJ Non repetitive surge peak on-state current (Single cycle, TJ initial = 25°C) I2t Value for fusing Critical rate of rise of on-state current I = 10mA Average gate power dissipation Storage junction temperature range Operating junction temperature range www.littelfuse.com ©2008 Littelfuse 145 Power Thyristor Databook SxX8xSx EV Series 0.8A Sensitive SCR Teccor® brand Thyristors Silicon Controlled Rectifiers Electrical Characteristics (TJ = 25°C, unless otherwise specified) SxX8xxx Symbol Description Test Conditions VD = 6V RL = 100 Ω VD = 6V RL = 100 Ω I Holding Current Critical Rate-of-Rise of Off-State Voltage R = 10μA = 1 KΩ Limit MIN. MAX. MAX. MIN. MAX. S1 0.5 5 S2 1 50 0.8 5 5 S 15 200 Unit μA μA V V mA I V V IH (dv/dt)s TJ = 125°C VD = VDRM /VRRM Exp. Waveform R =1 kΩ TJ = 25°C @ 600 V R =1 kΩ I =10mA PW = 15μsec IT = 1.6A(pk) MIN. 75 V/μs tq tgt Turn-Off Time MAX. 30 25 25 μs Turn-On Time MAX. 2.0 2.0 2.0 μs Static Characteristics (TJ = 25°C, unless otherwise specified) Symbol VTM IDRM Description Peak On-State Voltage Test Conditions ITM = 1.6A (pk) TJ = 25°C @ VD = VDRM R =1 kΩ TJ = 125°C @ VD = VDRM R =1 kΩ Limit MAX. MAX. MAX. Value 1.70 3 500 Unit V μA μA Off-State Current, Peak Repetitive Thermal Resistances Symbol Description Test Conditions TO-92 Rth(j-c) Junction to case (AC) IT = 0.8A (RMS)1 SOT-223 SOT-89 TO-92 Rth(j-a) Junction to ambient IT = 0.8A (RMS)1 SOT-223 SOT-89 1 Value 75 30 50 150 60 90 Unit °C/W °C/W °C/W °C/W °C/W °C/W 60Hz AC resistive load condition, 100% conduction. SxX8xSx EV Series 0.8A Sensitive SCR 146 Power Thyristor Databook www.littelfuse.com ©2008 Littelfuse Teccor® brand Thyristors Silicon Controlled Rectifiers Figure 1: Normalized DC Gate Trigger Current For All Quadrants vs. Junction Temperature 2.0 Figure 2: Normalized DC Holding Current vs. Junction Temperature 4.0 IGT IGT (TJ = 25°C) 1.5 3.0 IH (TJ = 25°C) IH 1.0 2.0 Ratio of 0.5 Ratio of -40 -15 +25 +65 +105 +125 1.0 0.0 0.0 -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 Junction Temperature (TJ) - °C Junction Temperature (TJ) - °C Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature 1.0 Figure 4: Power Dissipation (Typical) vs. RMS On-State Current 0.8 Average On-state Power Dissipation [PD(AV) ] - Watts CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o 0.9 0.8 Gate Trigger Voltage (VGT) - V 0.7 0.6 0.5 0.4 0.3 0.2 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 Junction Temperature (TJ) - °C 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 RMS On-state Current [I T(RMS) ] - Amps Figure 5: Maximum Allowable Case Temperature vs. On-State Current 130 Maximum Allowable Case Temperature (TC ) - oC CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings 120 110 100 90 TO-92 80 70 60 50 0.0 0.1 0.2 0.3 SOT-223 & SOT-89 0.4 0.5 0.6 0.7 0.8 RMS On-state Current [I T(RMS) ] - Amps www.littelfuse.com ©2008 Littelfuse 147 Power Thyristor Databook SxX8xSx EV Series 0.8A Sensitive SCR Teccor® brand Thyristors Silicon Controlled Rectifiers Figure 6: Surge Peak On-State Current vs. Number of Cycles Peak Surge (Non-repetitive) On-State Current (IT S M) – Amps . 20 Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature Notes: following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 0. 8 10 9 8 7 6 5 4 3 2 AD e vic e s 1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000 Surge Current Duration - Full Cycle Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus Temp) (TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) 260+0/-5 °C 5°C/second max 5°C/second max 217°C 150°C 200°C Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peak Temperature (TP) Do not exceed 5°C/second max 8 minutes Max. 280°C SxX8xSx EV Series 0.8A Sensitive SCR 148 Power Thyristor Databook www.littelfuse.com ©2008 Littelfuse Teccor® brand Thyristors Silicon Controlled Rectifiers Physical Specifications Terminal Finish 100% Matte Tin-plated. UL recognized epoxy meeting flammability classification 94V-0. Copper Alloy Reliability/Environmental Tests Test AC Blocking Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E Body Temperature Cycling Lead Material Temperature/ Humidity Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. High Temp Storage Low-Temp Storage Thermal Shock Autoclave Resistance to Solder Heat Solderability Lead Bend Dimensions – TO-92 Inches Dimensions Min A B C D E F 0.175 0.170 0.500 0.135 0.125 0.080 0.016 H I J 0.045 0.095 0.015 Typ — — — 0.165 — 0.095 — 0.050 0.100 — Max 0.205 0.210 — — 0.165 0.105 0.021 0.055 0.105 0.020 Min 4.450 4.320 12.700 3.430 3.180 2.040 0.407 1.150 2.420 0.380 Typ — — — 4.190 — 2.400 — 1.270 2.540 — Max 5.200 5.330 — — 4.190 2.660 0.533 1.390 2.660 0.500 Millimeters www.littelfuse.com ©2008 Littelfuse 149 Power Thyristor Databook SxX8xSx EV Series 0.8A Sensitive SCR Teccor® brand Thyristors Silicon Controlled Rectifiers Dimensions – SOT-223 Inches Dimensions Min A B 3.3 (0.130”) Millimeters Max 0.264 0.146 0.071 0.004 0.124 0.034 — — 0.287 0.014 Min 6.30 3.30 — 0.02 2.90 0.60 — — 6.70 0.24 Typ 6.50 3.50 — — 3.00 0.70 2.30 4.60 7 .00 0.26 Max 6.70 3.70 1.80 0.10 3.15 0.85 — — 7 .30 0.35 Typ 0.256 0.138 — — 0.118 0.027 0.090 0.181 0.276 0.010 0.248 0.130 — 0.001 0.114 0.024 — C D 1.5 (0.059”) E 1.2 (0.047”) (3x) 2.3 (0.091”) 6.4 (0.252”) F 1.5 (0.059”) 4.6 (0.181”) H I J K — 0.264 0.009 Dimensions in Millimeters (Inches) 10° MAX Recommended Soldering Footprint for SOT223 Dimensions – SOT-89 A J Tc Measuring Point C B D H E F G Inches Dimension Min A 0.173 0.090 0.055 0.115 0.035 0.056 0.115 H 0.014 0.014 0.064 Typ — — — — — — — — — — Max 0.181 0.102 0.063 0.121 0.047 0.062 0.121 0.017 0.019 0.072 Min 4.40 2.29 1.40 3.94 0.89 1.42 2.92 0.35 0.36 1.62 Millimeters Typ — — — — — — — — — — Max 4.60 2.60 1.60 4.25 1.20 1.57 3.07 0.44 0.48 1.83 Pad Layout for SOT-89 (2.21) .087 B C D E (3.91) .154 (1.12) .044 F (1.19) .047 (0.91) .036 (1.63) .064 (1.63) .064 I J 150 Power Thyristor Databook Dimensions in Millimeters (Inches) SxX8xSx EV Series 0.8A Sensitive SCR www.littelfuse.com ©2008 Littelfuse Teccor® brand Thyristors Silicon Controlled Rectifiers Product Selector Part Number S4X8ES S6X8ES S8X8ES S4X8TS S6X8TS S8X8TS S4X8BS S6X8BS S4X8ES1 S6X8ES1 S8X8ES1 S4X8TS1 S6X8TS1 S8X8TS1 S4X8ES2 S6X8ES2 S8X8ES2 S4X8TS2 S6X8TS2 S8X8TS2 Voltage 400V X — — X — — X — X — — X — — X — — X — — 600V — X — — X — — X — X — — X — — X — — X — 800V — — X — — X — — — — X — — X — — X — — X Gate Sensitivity 200 μA 200 μA 200 μA 200 μA 200 μA 200 μA 200 μA 200 μA 5 μA 5 μA 5 μA 5 μA 5 μA 5 μA 50 μA 50 μA 50 μA 50 μA 50 μA 50 μA Package TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 SOT-89 SOT-89 TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 Packing Options Part Number SxX8ESy SxX8ESyAP SxX8ESyRP SxX8TSyRP SxX8BSRP Marking SxX8ESy SxX8ESy SxX8ESy SxX8TSy xX8 Weight 0.170g 0.170g 0.170g 0.120g 0.053g Packing Mode Bulk Ammo Pack Tape & Reel Tape & Reel Tape & Reel Base Quantity 2500 2000 2000 1000 1000 Note: x = voltage, y = gate sensitivity www.littelfuse.com ©2008 Littelfuse 151 Power Thyristor Databook SxX8xSx EV Series 0.8A Sensitive SCR Teccor® brand Thyristors Silicon Controlled Rectifiers TO-92 (3-lead) Reel Pack (RP) Radial Leaded Meets all EIA-468-B 1994 Standards 1.6 (41.0) 0.236 (6.0) 0.02 (0.5) 0.098 (2.5) MAX 1.26 (32.0) 0.708 (18.0) 0.354 (9.0) 0.5 (12.7) 0.1 (2.54) 14.17(360.0) MT1 / Cathode 0.2 (5.08) MT2 / Anode 0.157 DIA (4.0) Gate Flat up 1.97 (50.0) Dimension s are in inches (and millimeters). Direction of Feed TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Meets all EIA-468-B 1994 Standards 0.236 (6.0) 1.62 (41.2) 0.708 (18.0) 0.02 (0.5) 0.098 (2.5) MAX 1.27 (32.2) 0.354 (9.0) 0.5 (12.7) 0.1 (2.54) MT2 / Anode 0.2 (5.08) MT1 / Cathode 0.157 (4.0) DIA Gate Flat down n of Fe Directio ed 25 Devices per fold 1.85 (47.0) 12.2 (310.0) Dimensions are in inches (and millimeters). 1.85 (47.0) 13.3 (338.0) SxX8xSx EV Series 0.8A Sensitive SCR 152 Power Thyristor Databook www.littelfuse.com ©2008 Littelfuse Teccor® brand Thyristors Silicon Controlled Rectifiers Tape & Reel Specifications for SOT-89 Ø1.5 mm 4 mm 8 mm 2 mm ANODE 1.75 mm 5.5 mm 12 mm GATE ANODE CATHODE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED Tape & Reel Specifications for SOT-223 Ø1.5 mm 4 mm 8 mm 2 mm ANODE 1.75 mm 5.5 mm 12 mm GATE ANODE CATHODE 180 mm 13 mm Abor Hole Diameter 13.4 mm DIRECTION OF FEED Part Numbering System Part Marking System DC Date Code (2 Digits Min.) Number = Year Letter = Month S xX8 x xx xx SERIES S: SCR VOLTAGE 4: 400V 6: 600V 8: 800V CURRENT X8: 0.8A PACKING TYPE Blank: Bulk Pack RP: Reel Pack (TO-92) Embossed Carrier Pack (SOT-223) Embossed Carrier Pack (SOT-89) AP: Ammo Pack (TO-92) SENSITIVITY & TYPE S1: 5μA Sensitive SCR S2: 50μA Sensiive SCR S: 200μA Sensitive SCR PACKAGE TYPE E: TO-92 T: SOT-223 B: SOT-89 www.littelfuse.com ©2008 Littelfuse 153 A K K A G G A SxX8xSx EV Series 0.8A Sensitive SCR Power Thyristor Databook