SMD1206P025TFA

POLYFUSE® RESETTABLE FUSES SMD1206 formerly No. 727 SMD Type, 6 V - 30 V Standard UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Specifications Packaging A Blistertape and reel Ø 178 mm Approvals Materials cULus Recognition TÜV Features This product line enables installation in limited space applications. These devices offer wide range in hold currents from 0.125 A to 1.50 A and voltages from 6 V to 30 V . The SMD1206 product line is suitable for high density circuit board applications in computers, cellular phone and general electronics. Suitable for reflow soldering WebLinks Further info see: www.wickmanngroup.com www.wickmanngroup.com/download/fuseology.pdf Further application info see fuseology: Dimensions (mm) Solder pad Layout (mm) 1.80 Solder-plated copper TS: Solder Material: 63/37 SnPb TF: Lead free plating on request Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85% R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only Solvent Resistance MIL-STD-202, Method 215, no change Marking “P”, Part Code Terminals: 1.8 1.0 1.0 Dimensions (mm) Model SMD1206P012TS/TF SMD1206P016TS/TF SMD1206P020TS/TF SMD1206P025TS/TF SMD1206P035TS/TF SMD1206P035TS/TF/15 SMD1206P050TS/TF SMD1206P075TS/TF SMD1206P100TS/TF SMD1206P150TS/TF A Min Max 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 B Min Max 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 C Min Max 0.65 0.65 0.50 0.50 0.45 0.45 0.45 0.45 0.75 1.00 1.45 1.45 1.00 1.00 0.75 0.75 0.75 1.25 1.25 1.60 D Min 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 E Min Max 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 packaging quantity tape 3.000 3.000 4.000 4.000 4.000 4.000 4.000 3.000 3.000 2.000 cURus • • • • • • • • • • SMD1206P012TS/TF SMD1206P016TS/TF SMD1206P020TS/TF SMD1206P025TS/TF SMD1206P035TSTF SMD1206P035TS/TF/15 SMD1206P050TS/TF SMD1206P075TS/TF SMD1206P100TS/TF SMD1206P150TS/TF NOTE: I hold = I trip = Vmax = I max = 0.125 0.160 0.200 0.250 0.350 0.350 0.500 0.750 1.000 1.500 0.29 0.37 0.40 0.50 0.75 0.75 1.00 1.50 1.80 3.00 30 30 16 16 6 15 6 6 6 6 40 40 40 40 40 40 40 40 40 40 0.20 @ 1.00 0.30 @ 1.00 0.05 @ 8.00 0.08 @ 8.00 0.10 @ 8.00 0.10 @ 8.00 0.10 @ 8.00 0.20 @ 8.00 0.30 @ 8.00 1.00 @ 8.00 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 1.500 1.200 0.600 0.550 0.300 0.300 0.150 0.090 0.055 0.040 3.600 2.800 1.550 1.400 0.750 0.750 0.400 0.200 0.110 0.080 6.000 4.500 2.500 2.300 1.200 1.200 0.700 0.290 0.210 0.120 Please choose TS for SnPb and TF for Sn plating Hold current: maximum current device will pass without tripping in 20 °C still air. Trip current: minimum current at which the device will trip in 20 °C still air. Maximum voltage device can withstand without damage at rated current (I max) Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 20 °C still air. Minimum resistance of device in initial (un-soldered) state. R min= R 1max= Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Specifications are subject to change without notice Order Information 040617 Qty. OrderNumber Model Packaging WebSite www.wickmanngroup.com Europe Tel: +49 2302 662-107 E-mail: sales@wickmann.com Americas Tel: +1 404 699-7820 E-mail: service@wickmannusa.com Asia Tel: +852 26 14-1108 China Tel: +86 21 6432-5146 E-mail: sales@wickmann.com.hk E-mail: sales@wickmann.cn TÜV • • • • • • • • • • Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). Model Ihold ITrip Vmax. dc Imax. max. time to trip (A) (A) (V) (A) (s @ A) Pd max. (W) Resistance Approvals R min.(Ω) R typ. (Ω) RI max.(Ω) POLYFUSE® RESETTABLE FUSES SMD1206 100.00 A BC D 10.00 A: SMD1206P012TS/TF B: SMD1206P016TS/TF C: SMD1206P020TS/TF D: SMD1206P025TS/TF Time to Trip (s) 1.00 0.10 0.01 0.10 1.00 10.00 Fault Current (A) 100.00 B C D 10.00 E A Time to Trip (s) A:SMD1206P035TS/TF B:SMD1206P050TS/TF C: SMD1206P075TS/TF D:SMD1206P100TS/TF E:SMD1206P150TS/TF 1.00 0.10 0.01 0.10 1.00 10.00 Fault Current (A) Thermal Derating Chart Model Ambient Operation Temperature - Ihold (A) -40 °C SMD1206P012TS/TF SMD1206P016TS/TF SMD1206P020TS/TF SMD1206P025TS/TF SMD1206P035TS/TF SMD1206P035TS/TF/15 SMD1206P050TS/TF SMD1206P075TS/TF SMD1206P100TS/TF SMD1206P150TS/TF 0.18 0.22 0.28 0.37 0.50 0.50 0.71 1.14 1.45 2.18 -20 °C 0.16 0.20 0.25 0.33 0.45 0.65 0.64 1.01 1.31 1.94 0 °C 0.14 0.18 0.23 0.29 0.40 0.40 0.57 0.88 1.15 1.72 23 °C 0.125 0.16 0.20 0.25 0.35 0.35 0.50 0.75 1.00 1.50 40 °C 0.10 0.14 0.17 0.22 0.30 0.30 0.42 0.65 0.84 1.28 50 °C 0.09 0.12 0.15 0.20 0.27 0.27 0.39 0.59 0.77 1.17 60 °C 0.08 0.10 0.14 0.17 0.24 0.24 0.35 0.54 0.69 1.06 70 °C 0.07 0.09 0.12 0.15 0.21 0.21 0.31 0.49 0.61 0.96 85 °C 0.05 0.08 0.09 0.12 0.15 0.15 0.25 0.41 0.48 0.77 040617 WebSite www.wickmanngroup.com Europe Tel: +49 2302 662-107 E-mail: sales@wickmann.com Americas Tel: +1 404 699-7820 E-mail: service@wickmannusa.com Asia Tel: +852 26 14-1108 China Tel: +86 21 6432-5146 E-mail: sales@wickmann.com.hk E-mail: sales@wickmann.cn