LMBR1200ET1G

LMBR1200ET1G Schottky Barrier Diode 2 2 1. FEATURES ● We declare that the material of product compliance with RoHS requirements and Halogen Free. 1 ● Low power loss,high efficiency. ● For use in low voltage high frequency inverters,free wheeling,and 1 SOD323HE polarity protection applications. ● Guardring for over voltage protection. ● High temperature soldering guaranteed:260°C/10 seconds at terminals. 2. DEVICE MARKING AND ORDERING INFORMATION Device Marking Shipping LMBR1200ET1G 120 5000/Tape&Reel 3. MAXIMUM RATINGS(Ta = 25ºC) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Typical thermal resistance (Note 1) Operating junction temperature range storage temperature range Symbol VRRM Limits 200 Unit V VRMS 140 V VDC 200 V IF(AV) 1 A IFSM 22 A RθJA 210 RθJL TJ 70 –55 ~ +150 TSTG –55 ~ +150 ℃/W ℃ ℃ Note: 1. 8.0mm²(.013mm thick) land areas Leshan Radio Company, LTD. Rev.A Jul. 2021 1/4 LMBR1200ET1G Schottky Barrier Diode 4. ELECTRICAL CHARACTERISTICS (Ta= 25ºC) Characteristic Symbol Maximum instantaneous forward (IF = 1.0 A, TJ = 25°C) VF Min. Typ. Max. - - 0.92 - 160 0.03 10 - Unit V Maximum DC reverse current at rated DC blocking voltage TA = 25°C IR TJ = 125°C Typical junction capacitance at 4.0V, 1MHz Leshan Radio Company, LTD. CJ Rev.A Jul. 2021 mA pF 2/4 LMBR1200ET1G Schottky Barrier Diode 5.ELECTRICAL CHARACTERISTICS CURVES 1.0 Peak forward surge current (A) 60 Hz Resistive or Inductive Load 0.5 0 Instantaneous Forward Current (A) 100 Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 11 0 25 50 75 100 125 150 Case Temperature, °C Fig 3. – Typical Instantaneous Forward Characteristics 0 1 100 10 10 1.0 0.1 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage (V) Tj=125℃ 1.0 Tj=75℃ 0.1 0.01 Tj=25℃ 0.001 0 Fig 5. –typical transient thermal impedance 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance 1000 1000 Junction Capacitance (pF) Transient thermal impedance(°C/W) 10 Number of Cycles at 60Hz Fig 4. – Typical Reverse Characteristics TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.01 0.2 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 22 Instantaneous Reverse Current (mA) Average Forward Rectified Current Fig. 1 – Forward Current Derating Curve 100 10 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 100 1 0.01 0.1 Leshan Radio Company, LTD. 1.0 t,Pulse duration,sec 10 10 0.1 Rev.A Jul. 2021 1 10 Reverse Voltage (V) 100 3/4 LMBR1200ET1G Schottky Barrier Diode 6.OUTLINE AND DIMENSIONS SOD323HE MIN MAX Typ. DIM A 2.30 2.70 2.55 B 1.20 1.35 1.25 C 1.75 1.95 1.90 D - - 0.30 E 0.55 0.75 0.67 F 0.10 0.20 0.15 G 0.45 0.65 0.50 I 0.40 0.70 0.50 J 1.15 1.55 1.40 K - - 0.80 All Dimensions in mm 7.SOLDERING FOOTPRINT RECOMMENDED PAD COMPATIBLE PAD SOD323HE SOD323HE DIM (mm) DIM (mm) A 1.1 D 1.0 B 2.0 E 0.8 C 1.9 C 2.4 D 0.8 E 1.0 Leshan Radio Company, LTD. Rev.A Jul. 2021 4/4 DISCLAIMER ● Curve guarantee in the specification. The curve of test items with electric parameter is used as quality guarantee. The curve of test items without electric parameter is used as reference only. ● Before you use our Products for new Project, you are requested to carefully read this document and fully under-stand its contents. LRC shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any LRC’s Products against warning, caution or note contained in this document. ● All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using LRC's Products,please confirm the latest information with a LRC sales represe-ntative.