S-SOD4007-SH

S-SOD4007-SH Surface Mount Glass Passivated Junction Rectifiers Voltage 1000V Forward Current 1.0A 1. FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0. High temperature metallurgically bonded construction. ● Cavity-free glass passivated junction. ● SOD123FL ● Capable of meeting environmental standards of MIL-S-19500. ● 1.0 A operation at TA=75°C with no thermal runaway ● Typical IR less than 1.0µA. ● High temperature soldering guaranteed:260°C/10 seconds. ● We declare that the material of product compliance with RoHS requirements and Halogen Free. ● S- prefix for automotive and other applications requiring unique site and control change requirements; AEC-Q101 qualified and PPAP capable. 2. DEVICE MARKING AND ORDERING INFORMATION Device Marking Shipping S-SOD4007-SH A7 3000/Tape&Reel 3. MAXIMUM RATINGS(Ta = 25ºC) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current lead length at TC = 75°C(Note 1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Reverse surger current(20mS) Typical thermal resistance (Note 1) Operating junction temperature range storage temperature range Symbol Limits VRRM VRMS 1000 700 VDC 1000 V IF(AV) 1 A IFSM 30 A IRSM 18 mA RθJA 170 ℃/W RθJL 40 ℃/W TJ –55 ~ +150 ℃ TSTG –55 ~ +150 ℃ Unit V V 4. ELECTRICAL CHARACTERISTICS (Ta= 25ºC) Characteristic Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TJ= 25°C at rated DC blocking voltage TJ = 125°C Typical junction capacitance at 4.0V, 1MHz Symbol Min Typ. Max Unit VF - 15 1.1 5 50 - V IR CJ µA pF Note: 1.8.0mm2 (.013mm thick) land areas Leshan Radio Company, LTD. Rev.B Dec. 2019 1/3 S-SOD4007-SH Surface Mount Glass Passivated Junction Rectifiers 5.ELECTRICAL CHARACTERISTICS CURVES Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current 1.0 0.5 0.375" (9.5mm) Lead Length 0 0 15 0 1 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 30 0.1 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 0.01 0.001 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage 10 Number of Cycles at 60Hz 100 Fig 4. – Typical Reverse Characteristics 1.0 1000 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 25 50 75 100 125 150 175 CASE TEMPERATURE:Tc(°C) Fig 3. – Typical Instantaneous Forward Characteristics 10 Transient thermal impedance(°C/W) Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load 100 10 Tj=125℃ 1.0 Tj=75℃ 0.1 Tj=25℃ 0.01 1.6 Fig 5. –typical transient thermal impedance 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 100 10 100 10 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1.0 1 0.01 0.1 1.0 10 t,Pulse duration,sec Leshan Radio Company, LTD. 0.1 100 Rev.B Dec. 2019 1 10 Reverse Voltage (V) 2/3 S-SOD4007-SH Surface Mount Glass Passivated Junction Rectifiers 6.OUTLINE AND DIMENSIONS SOD123FL DIM MIN NOR MAX A 0.90 1.05 1.15 b 0.75 0.80 0.95 L 0.50 0.80 1.10 E 2.60 2.75 2.90 D 1.60 1.75 1.90 HE 3.50 3.65 3.80 c 0.12 0.17 0.22 L1 0.25 0.45 0.65 All Dimensions in mm 7.SOLDERING FOOTPRINT DIM X Y X1 Leshan Radio Company, LTD. Rev.B Dec. 2019 (mm) 1.20 1.10 2.00 3/3 DISCLAIMER ● Curve guarantee in the specification. The curve of test items with electric parameter is used as quality guarantee. The curve of test items without electric parameter is used as reference only. ● Before you use our Products for new Project, you are requested to carefully read this document and fully under-stand its contents. LRC shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any LRC’s Products against warning, caution or note contained in this document. ● All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using LRC's Products,please confirm the latest information with a LRC sales represe-ntative.