SMAJ130A

SMAJ***A Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE 5.0 TO 400 Volts 400 Watt Peak Pulse Power FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate (duty cycle):0.01% * Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260°C/10 seconds, MECHANICAL DATA We declare that the material of product compliance Case: JEDEC DO-214AC molded plastic Terminals: solderable per MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.0023 ounce, 0.065 gram with ROHS requirements 1.DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use CA Suffix for types SMAJ5.0CA thru types SMAJ400CA Electrical characteristics apply in both directions.marking like Uni; without color band. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL VALUE UNITS Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) RATING PPPM Minimum 400 Watts Steady State Power Dissipation at TL=75°C(Note 2) PM(AV) 1.0 Watts IFSM 30 Amps Operating Temperature Range TJ , -55 to +150 °C Storage Temperature Range TSTG -55 to +175 °C Peak Forward Surge Current, 8.3ms Single Half SineWave Superimposed on Rated Load(JECED Method) (Note 3) NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. SMAJ***A Series UniDirectional Part Device marking code Number Reverse Breakdown Breakdown Test Maximum Peak Reverse Stand-off Voltage Voltage Current Clamping Pulse Leakage Voltage VBR (V) VBR (V) IT Voltage Current @VRWM VRWM (V) Min. @IT Max. @IT (mA) @IPP VC (V) Ipp (A) IR (uA) SMAJ5.0A AE 5.00 6.40 7.00 10.00 9.20 43.50 800 SMAJ6.0A AG 6.00 6.67 7.37 10.00 10.30 38.80 800 SMAJ6.5A AK 6.50 7.22 7.98 10.00 11.20 35.70 500 SMAJ7.0A AM 7.00 7.78 8.60 10.00 12.00 33.30 200 SMAJ7.5A AP 7.50 8.33 9.21 1.00 12.90 31.00 100 SMAJ8.0A AR 8.00 8.89 9.83 1.00 13.60 29.40 50 SMAJ8.5A AT 8.50 9.44 10.40 1.00 14.40 27.80 20 SMAJ9.0A AV 9.00 10.00 11.10 1.00 15.40 26.00 10 SMAJ10A AX 10.00 11.10 12.30 1.00 17.00 23.50 1 SMAJ11A AZ 11.00 12.20 13.50 1.00 18.20 22.00 1 SMAJ12A BE 12.00 13.30 14.70 1.00 19.90 20.10 1 SMAJ13A BG 13.00 14.40 15.90 1.00 21.50 18.60 1 SMAJ14A BK 14.00 15.60 17.20 1.00 23.20 17.20 1 SMAJ15A BM 15.00 16.70 18.50 1.00 24.40 16.40 1 SMAJ16A BP 16.00 17.80 19.70 1.00 26.00 15.40 1 SMAJ17A BR 17.00 18.90 20.90 1.00 27.60 14.50 1 SMAJ18A BT 18.00 20.00 22.10 1.00 29.20 13.70 1 SMAJ20A BV 20.00 22.20 24.50 1.00 32.40 12.30 1 SMAJ22A BX 22.00 24.40 26.90 1.00 35.50 11.30 1 SMAJ24A BZ 24.00 26.70 29.50 1.00 38.90 10.30 1 SMAJ26A CE 26.00 28.90 31.90 1.00 42.10 9.50 1 SMAJ28A CG 28.00 31.10 34.40 1.00 45.40 8.80 1 SMAJ30A CK 30.00 33.30 36.80 1.00 48.40 8.30 1 SMAJ33A CM 33.00 36.70 40.60 1.00 53.30 7.50 1 SMAJ36A CP 36.00 40.00 44.20 1.00 58.10 6.90 1 SMAJ40A CR 40.00 44.40 49.10 1.00 64.50 6.20 1 SMAJ43A CT 43.00 47.80 52.80 1.00 69.40 5.80 1 SMAJ45A CV 45.00 50.00 55.30 1.00 72.70 5.50 1 SMAJ48A CX 48.00 53.30 58.90 1.00 77.40 5.20 1 SMAJ51A CZ 51.00 56.70 62.70 1.00 82.40 4.90 1 SMAJ54A RE 54.00 60.00 66.30 1.00 87.10 4.60 1 SMAJ58A RG 58.00 64.40 71.20 1.00 93.60 4.30 1 SMAJ60A RK 60.00 66.70 73.70 1.00 96.80 4.10 1 SMAJ64A RM 64.00 71.10 78.60 1.00 103.00 3.90 1 SMAJ70A RP 70.00 77.80 86.00 1.00 113.00 3.50 1 SMAJ75A RR 75.00 83.30 92.10 1.00 121.00 3.30 1 SMAJ78A RT 78.00 86.70 95.80 1.00 126.00 3.20 1 SMAJ85A RV 85.00 94.40 104.00 1.00 137.00 2.90 1 SMAJ90A RX 90.00 100.00 111.00 1.00 146.00 2.70 1 SMAJ100A RZ 100.00 111.00 123.00 1.00 162.00 2.50 1 SMAJ110A SE 110.00 122.00 135.00 1.00 177.00 2.30 1 SMAJ120A SG 120.00 133.00 147.00 1.00 193.00 2.10 1 SMAJ130A SK 130.00 144.00 159.00 1.00 209.00 1.90 1 SMAJ150A SM 150.00 167.00 185.00 1.00 243.00 1.60 1 SMAJ160A SP 160.00 178.00 197.00 1.00 259.00 1.50 1 SMAJ170A SR 170.00 189.00 209.00 1.00 275.00 1.50 1 SMAJ180A ST 180.00 198.00 221.00 1.00 291.00 1.40 1 SMAJ190A SV 190.00 209.00 233.00 1.00 307.00 1.30 1 SMAJ200A SX 200.00 220.00 246.00 1.00 324.00 1.30 1 SMAJ220A SY 220.00 246.00 272.00 1.00 356.00 1.20 1 SMAJ250A SZ 250.00 279.00 309.00 1.00 405.00 1.00 1 SMAJ300A TE 300.00 335.00 371.00 1.00 486.00 0.80 1 SMAJ350A TG 350.00 391.00 432.00 1.00 567.00 0.70 1 SMAJ400A TK 400.00 447.00 494.00 1.00 648.00 0.60 1 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. SMAJ***A Series Fig. 1-Peak Pulse Power Rating Curve 100 PPPM, Peak Pulse Power,KW Non-Repetive Pulse Waveform Shown in Fig.3 TA=25°C 10 1.0 0.1 0.1 Peak Pulse Power(PPP) or current(IPP) Derating in percentage % 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2-Pulse Derating Curve 125 100 50 0 1.0 10 100 td,Pulse Width,μsec 1000 10000 0 Fig. 4-Typical Junction Capacitance Unidirectional Fig. 3-Pulse Waveform 10000 TA=25℃ Test Waveform tf=10μs td=1000μs tf=10μs 100 Peak Value Ippm 10/1000μs Waveform as deffused by R.E.A 50 Half Value Ipp/2=td Cj, Capacitance,pF IPPM, Peak Pulse Current % 150 1.0 2.0 t,Time,ms meansured at stand-off voltage VWM Bi-Directional 100 10 1.0 3.0 10 1.0 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec Uni-Directional 10 100 1000 V(WM),Reverse Stand-off Voltage,Voltage Fig. 6-Maximum Non-Repetitive Peak Forward Surge Current Uniderictional Fig 5. –typical transient thermal impedance IFSM, Forward Surge Current,Amperes Transient thermal impedance(°C/W) 0 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 1000 0 100 25 50 100 125 150 175 200 TA,Ambient Temperature,°C 100 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10 1 10 100 Number of Cycles At 60 Hz SMAJ***A Series 3. dimension: AG 负极色环 产品型 SMAJ***A Series 4. Update Record 版次 更新记录 更新作者 更新日期 1 第一版 周杰 2010-4-27 2 调整储存温度为175度 周杰 2010-9-23 3 增加建议焊片尺寸，调整产品单只重量。 周杰 2011-12-6 4 明确双向产品印字规范。 周杰 2012-5-10 5 去除10%精度系列 谭志伟 2018-5-23 6 增加300V 350V 400V产品 谭志伟 2018-10-13