KW1-801C26

KW1-801XY SERIES Multi-Color LED Numeric Display Single Digit (0.80") DESCRIPTION: The KW1-801XY series is large multi-color single digit display in 0.80 inch (20.30mm) height designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. PACKAGE DIMENSIONS 11.60(0.457) 8 PIN 1. + 25.00(0.984) o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. o 20.30(0.800) 18.60(0.732) φ2.5(0.098) F E D A B C 10.60(0.417) φ0.50(0.020) 15.24(0.600) 3.0(0118) min. G INTERNAL CIRCUIT DIAGRAM 5,18 GREEN RED TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A B C D E F G 2 1 17 16 1312 9 8 6 7 3 4 15 14 5,18 NC: 10, 11 A B C D E F G 2 1 17 16 1312 9 8 6 7 3 4 15 14 NC: 10, 11 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaP KW1-801ASG GaAlAs GaP KW1-801A26 GaAsP/GaP GaP KW1-801C32 GaAsP/GaP GaP KW1-801CSG GaAlAs GaP KW1-801C26 GaAsP/GaP GaP Emitted Color Bright Red Green Super Red Super Green Yellow Green Hi-Eff Red Green Super Red Super Green Yellow Green Common Cathode Common Anode C.C or C.A Wave Length λρ (nm) 635 565 660 570 585 565 635 565 660 570 585 565 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 30 20 30 30 30 45 30 20 30 30 30 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 1.7 1.7 1.5 1.7 1.7 1.7 1.7 1.7 1.5 1.7 1.7 1.7 1.9 2.2 1.9 2.2 2.2 2.2 1.9 2.2 1.9 2.2 2.2 2.2 2.6 10-20 750 2.6 10-20 750 2000 2000 KW1-801A32 2.6 10-20 1500 5000 2.6 10-20 850 2.6 10-20 700 2.6 10-20 750 2.6 10-20 750 2.6 10-20 750 2200 1600 2000 2000 2000 2.6 10-20 1500 5000 2.6 10-20 850 2.6 10-20 700 2.6 10-20 750 2200 1600 2000 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent). GREEN RED 2.54(0.100)