KW2-361CG

KW2-361 SERIES LED Numeric Display Dual Digit (0.36") DESCRIPTION: The KW2-361 series is 0.36 inch (9.2mm) height dual digit display with right DPs designed for viewing distances of up to three meters. This series is suitable for use in instruments, point of sales terminals and electrical appliances. All devices are available as either common anode or common cathode. PACKAGE DIMENSIONS 5.0 o 4.80 0.80 DIG.1 9.2(0.36") DIG.2 A F E D G B C DP PIN 1 + 7.50 15.00 7.20 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. o 14.00 φ0.50 2.54*4=10.16 10.16 INTERNAL CIRCUIT DIAGRAM 10 DIG.1 A B C D E F G DP 5 DIG.2 A B C D E F G DP 39867412 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 10 DIG.1 A B C D E F G DP 5 DIG.2 A B C D E F G DP 39867412 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Hi-Eff. Red Super Red Common Green Anode Super Green Yellow Hi-Eff Red Super Red Common Green Cathode Super Green Yellow 570 585 30 30 100 100 50 50 100 100 1.7 1.7 2.2 1.9 2.6 10-20 850 2.6 10-20 600 1900 1500 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 570 585 635 660 30 30 45 20 100 100 100 100 50 50 50 50 100 100 100 100 1.7 1.7 1.7 1.5 2.2 1.9 1.9 1.9 2.6 10-20 850 2.6 10-20 600 2.6 10-20 700 1900 1500 1800 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 C.C or C.A Wave Length λρ (nm) 635 660 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 20 100 100 50 50 100 100 1.7 1.5 1.9 1.9 2.6 10-20 700 1800 KW2-361A3 KW2-361AS KW2-361A2 KW2-361AG KW2-361A6 KW2-361C3 KW2-361CS KW2-361C2 KW2-361CG KW2-361C6 2.6 10-20 1500 5000 2.6 10-20 1500 5000 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).