KW4-301C2

KW4-301 SERIES LED Numeric Display Four Digit (0.30") DESCRIPTION: The KW4-301 series is 0.30 inch (7.60mm) height four digit display. All devices are available as either common anode or common cathode. PACKAGE DIMENSIONS 10.0 o 3.80 0.80 7.60(0.3") + PIN 1 6.80 6.80 30.40 6.80 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. 2.54*11=27.94 DIG.1 D1 D2 D3 D7 DIG.2 D6 F E D8 D DIG.3 DIG.4 A D9 G B C D11 o 7.00 13.20 φ0.45 10.16 INTERNAL CIRCUIT DIAGRAM 24 2 DIG.1 D1 D2 D3 A B C D E F G 5 DIG.2 6 8 DIG.3 16 10 DIG.4 13 14 A B C D E F G D6 D7 A B C D E F G D8 A B C D E F G D9 D11 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 23 4 1 24 2 21 17 19 20 3 11 18 22 5 7 6 8 DIG.3 9 16 10 DIG.4 15 12 13 14 DIG.1 D1 D2 D3 A B C D E F G DIG.2 A B C D E F G D6 D7 A B C D E F G D8 A B C D E F G D9 D11 23 4 1 21 17 19 20 3 11 18 22 7 9 15 12 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Hi-Eff. Red Super Red Green Super Green Yellow Hi-Eff Red Super Red Green Super Green Yellow Common Cathode Common Anode C.C or C.A Wave Length λρ (nm) 635 660 565 570 585 635 660 565 570 585 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 20 30 30 30 45 20 30 30 30 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 1.7 1.5 1.7 1.7 1.7 1.7 1.5 1.7 1.7 1.7 1.9 1.9 2.2 2.2 1.9 1.9 1.9 2.2 2.2 1.9 2.6 10-20 700 1800 KW4-301A3 KW4-301AS KW4-301A2 KW4-301AG KW4-301A6 KW4-301C3 KW4-301CS KW4-301C2 KW4-301CG KW4-301C6 2.6 10-20 1500 5000 2.6 10-20 700 2.6 10-20 850 2.6 10-20 600 2.6 10-20 700 1600 1900 1500 1800 2.6 10-20 1500 5000 2.6 10-20 700 2.6 10-20 850 2.6 10-20 600 1600 1900 1500 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).