KWA-2001C3

KWA-2001 SERIES Alphanumeric LED Display Single Digit (2.00") DESCRIPTION: The KWA-2001 series is 2.00 inch (50.80mm) height 16-segment single digit alphanumeric displays with the right DP. This series is suitable for use in instrument panels, digital readout displays. All devices are available as either common anode or common cathode. 50.80(2.00) PACKAGE DIMENSIONS 29.20(1.150) 10 o 65.00(2.559) PIN 1. + 45.00(1.772) φ4.5(0.177) A1 A2 11.00(0.433) F E 2.54*8=20.30 H G1 N M J K G2 L ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. φ0.50(0.02) o B C DP D1 D2 INTERNAL CIRCUIT DIAGRAM 11 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A1 A2 B C D1 D2 E 1 18 16 13 9 10 8 F G1 G2 H 4 5 15 3 11 J 2 KLM 17 14 6 P DP 7 12 A1 A2 B C D1 D2 E 1 18 16 13 9 10 8 F G1 G2 H 4 5 15 3 J 2 KLM 17 14 6 P DP 7 12 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Hi-Eff. Red Super Red Green Super Green Yellow Hi-Eff Red Super Red Green Super Green Yellow Common Cathode Common Anode C.C or C.A Wave Length λρ (nm) 635 660 565 570 585 635 660 565 570 585 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 20 30 30 30 45 20 30 30 30 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 6.8 6.0 6.8 6.8 6.8 6.8 6.0 6.8 6.8 6.8 9.6 10.4 10-20 2000 6000 7.6 10.4 10-20 12000 42000 9.6 10.4 10-20 1800 5400 9.6 10.4 10-20 2000 5700 9.6 10.4 10-20 1800 5400 9.6 10.4 10-20 2000 6000 7.6 10.4 10-20 12000 42000 9.6 10.4 10-20 1800 5400 9.6 10.4 10-20 2000 5700 9.6 10.4 10-20 1800 5400 KWA-2001A3 KWA-2001AS KWA-2001A2 KWA-2001AG KWA-2001A6 KWA-2001C3 KWA-2001CS KWA-2001C2 KWA-2001CG KWA-2001C6 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent). 48.0(1.89)