KWT-541C2

KWT-541 SERIES Alphanumeric LED Display Dual Digit (0.54") DESCRIPTION: The KWT-541 series is 0.54 inch (13.72mm) height 14-segment dual digit alphanumeric displays with the right DPs. This series is suitable for use in instrument panels, digital readout displays. All devices are available as either common anode or common cathode. PACKAGE DIMENSIONS 5.0 o 8.00 1.10 DIG. 1 F DIG. 2 A 13.72(.54") 21.10 HJK G1 G2 NM L B C DP E + PIN 1. 12.70 25.20 7.80 D ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. o φ0.50 2.54*8=20.32 15.24 INTERNAL CIRCUIT DIAGRAM 16 DIG 1 11 DIG 2 A B C D E F G1 G2 H J K L M N DP A B C D E F G1 G2 H J K L M N DP 12 10 9 7 1 18 13 6 17 15 14 5 4 2 8 3 NO CONNECT 11 DIG 2 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 16 DIG 1 A B C D E F G1 G2 H J K L M N DP A B C D E F G1 G2 H J K L M N DP 12 10 9 7 1 18 13 6 17 15 14 5 4 2 8 3 NO CONNECT PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Hi-Eff. Red Super Red Common Green Anode Super Green Yellow Hi-Eff Red Super Red Common Green Cathode Super Green Yellow 570 585 30 30 100 100 50 50 100 100 1.7 1.7 2.2 1.9 2.6 10-20 850 2.6 10-20 700 2200 1600 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 570 585 635 660 30 30 45 20 100 100 100 100 50 50 50 50 100 100 100 100 1.7 1.7 1.7 1.5 2.2 1.9 1.9 1.9 2.6 10-20 850 2.6 10-20 700 2.6 10-20 750 2200 1600 2000 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 C.C or C.A Wave Length λρ (nm) 635 660 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 20 100 100 50 50 100 100 1.7 1.5 1.9 1.9 2.6 10-20 750 2000 KWT-541A3 KWT-541AS KWT-541A2 KWT-541AG KWT-541A6 KWT-541C3 KWT-541CS KWT-541C2 KWT-541CG KWT-541C6 2.6 10-20 5600 21000 2.6 10-20 5600 21000 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).