0322
0322-1
Kupplung nach IEC 60130-9, IP 68, mit Schraubverschluss und Lötanschlüssen, 360° geschirmt 0322-1: erfüllt zusätzlich die AISG-Spezifikation
1. Temperaturbereich 2. Werkstoffe Kontaktträger Kontaktbuchse 3- bis 8-polig Kontaktbuchse 12-bis 14-polig Gehäuse Rändelmutter Dichtung 3. Mechanische Daten Steckkraft/Kontakt 3- bis 8-polig1 Steckkraft/Kontakt 12-bis 14-polig2 Ziehkraft/Kontakt 3- bis 8-polig1 Ziehkraft/Kontakt 12-bis 14-polig2 Kontaktierung mit Schutzart3 Weiteres siehe Tabelle 4. Elektrische Daten Durchgangswiderstand Schirmdämpfung Weiteres siehe Tabelle
1 2 3
-40 °C/+85 °C PA GF CuZn, versilbert und flashvergoldet CuZn, unternickelt und vergoldet CuZn, vernickelt CuZn, vernickelt NBR
< 5,0 N < 5,0 N > 1,2 N > 0,9 N Steckern 031..., 033..., 0365 IP 68
≤ 5 mΩ siehe Diagramm auf Seite 3.64
4
gemessen mit einem polierten Stahlstift, Nennmaß 1,5 mm gemessen mit einem polierten Stahlstift, Nennmaß 1,0 mm nach DIN EN 60529, nur in verschraubtem Zustand mit einem dazugehörigen Gegenstück, IP-X8-Anforderungen in Absprache zwischen Anwender und Hersteller nach VDE 0110/IEC 60664
Stecker plug connecteur mâle 0332
O-Ring O Ring anneau torique
*a Dichtung gasket joint d’étanchéité *c Schirmung shielding blindage
Kupplung socket connecteur femelle 0322
Montageschlüssel wrench clé de montage 0380
Polbilder, von der Lötseite gesehen Pin configurations, solder side view Schémas de raccordement, vus du côté à souder
0322 03
0322 04
0322 05
0322 05-1
0322 06
0322 07
0322 07-1
0322 08
0322 08-1 0322 12 0322-1 08-1
0322 14 12/2009
www.lumberg.com
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9 und AISG-Spezifikation, IP 68 Circular connectors with threaded joint acc. to IEC 60130-9 and AISG specification, IP 68 Connecteurs circulaires avec verrouillage à vis suivant CEI 60130-9 et spécification AISG, IP 68
0322 0322-1 0322 0322-1
Socket acc. to IEC 60130-9, IP 68, with threaded joint and solder terminals, 360° shielded 0322-1: also complies with AISG specification
1. Temperature range 2. Materials Insulating body Contact bush 3 to 8 poles Contact bush 12 to 14 poles Housing Knurled nut Gasket 3. Mechanical data Insertion force/contact 3–8 poles1 Insertion force/contact 12–14 poles2 Withdrawal force/contact 3–8 poles1 Withdrawal force/cont. 12–14 poles2 Mating with Protection3 For further information see table 4. Electrical data Contact resistance Attenuation For further information see table
1 2 3
Connecteur femelle suivant CEI 60130-9, IP 68, avec verrouillage à vis et connexion par soudure, blindé à 360° 0322-1: aussi conforme à la spécification AISG
1. Température d’utilisation 2. Matériaux Corps isolant Prise de contact 3 à 8 pôles Prise de contact 12 à 14 pôles Boîtier Écrou moleté Joint d’étanchéité 3. Caractéristiques mécaniques -40 °C/+85 °C PA GF CuZn, argenté et doré flash CuZn, sous-nickelé et doré CuZn, nickelé CuZn, nickelé NBR
-40 °C/+85 °C PA GF CuZn, silvered and flash gilded CuZn, pre-nickeled and gilded CuZn, nickeled CuZn, nickeled NBR
< 5.0 N < 5.0 N > 1.2 N > 0.9 N plugs 031..., 033..., 0365 IP 68
Force d’insertion/contact 3–8 pôles1 Force d’insertion/cont. 12–14 pôles2 Force de séparation/con. 3–8 pôles1 Force de séparation/cont. 12–14 pôles2 Raccordement avec Protection3 Pour plus de détails, voir tableau 4. Caractéristiques électriques
< 5,0 N < 5,0 N > 1,2 N > 0,9 N connecteurs mâles 031..., 033..., 0365 IP 68
≤ 5 mΩ see graph on page 3.64
Résistance de contact Atténuation Pour plus de détails, voir tableau
1 2 3
≤ 5 mΩ voir graphique à la page 3.64
4
measured with a polished steel pin, nominal thickness 1.5 mm measured with a polished steel pin, nominal thickness 1.0 mm according to DIN EN 60529, only in locked position with a proper counter part, IP X8 requirements under agreement between user and manufacturer according to VDE 0110/IEC 60664
4
mesurée avec une tige d’acier poli, épaisseur nominale 1,5 mm mesurée avec une tige d’acier poli, épaisseur nominale 1,0 mm suivant DIN EN 60529, uniquement à l’état verrouillé avec un propre pendant, exigences IP X8 après entente entre utilisateur et fabricant suivant VDE 0110/CEI 60664
Ver pac ku Pac kag ngsein hei eu Uni té d nit (PU t (VE) ’em ) ball age (UE )
Designation Désignation
Polz ah Pole l s Pôle s
Bestellbezeichnung
0322 03 0322 04 0322 05 0322 05-1 0322 06 0322 07 0322 07-1 0322 08 0322 08-1 0322 12 0322 14 0322-1 08-1
3 4 5 5 6 7 7 8 8 12 14 8
50 50 50 50 50 50 50 50 50 50 50 50
Verpackung: Einzelteilesätze in Kunststoffbeuteln, im Karton Packaging: sets of individual parts in plastic bags, in a cardboard box Emballage: kits de pièces détachées dans sachets en plastique, dans un carton
www.lumberg.com
Ans ch Wir lussque e se rsch ct nitt Sec tion ion de racc . de fil Kab eldu rchm Cab le es Dia diame ser mèt t re d er e ca ble Bem essu ngs Rat stro ed Cou curren m t ran t as sign é Bem essu ngs Rat spa ed Ten voltag 2 nnung 2 sion e assi gné 2 e Prü fspa nnu Test ng vo Ten ltage sion d’és sai Isol ati Insu onswid er lat Rés ion re stand ista s nce istanc e d’is olem Kon ent tak tka Con tact pazit Cap ät a capa con cité de citanc tact e
mm2 mm A V AC kV AC eff. Ω pF
0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,75 0,25 0,25 0,75
4–8 4–8 4–8 4–8 4–8 4–8 4–8 4–8 4–8 4–8 4–8 4–8
5 5 5 5 5 5 5 5 5 3 3 5
250 250 60 250 250 250 60 60 60 60 60 60
2 2 1 2 2 2 1 1 1 1 1 1
1013 1013 1012 1013 1013 1013 1012 1012 1012 1012 1012 1012
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
2 2 3 2 2 2 3 3 3 3 3 3
12/2009
Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 68 Circular connectors with threaded joint acc. to IEC 60130-9, IP 68 Connecteurs circulaires avec verrouillage à vis suivant CEI 60130-9, IP 68
Elektromagnetische Verträglichkeit (EMV) Electromagnetic compatibility (EMC) Compatibilité électromagnétique
Steckverbinder-Kombinationen connector combinations combinaisons des connecteurs 0322, 0322-1, 0360, 0332, 0332-1, 0365
120 110
Schirmdämpfung Attenuation Atténuation (dB)
100 90 80 70 60 0 200 400 600
Frequenz · Frequency · Fréquence (MHz)
Schirmdämpfung nach VG 95214-12 (Triaxialmethode KS 12 B) Attenuation acc. to VG 95214-12 (triaxial method KS 12 B) Atténuation suivant VG 95214-12 (méthode triaxiale KS 12 B)
www.lumberg.com
12/2009