HPWT-MH02-00000

Technical Datasheet DS55 Lead Free SuperFlux LEDs Introduction This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs red, red orange and amber LED materials, which allow designers to match the color of many lighting applications like vehicle signal lamps, specialty lighting, and electronic signs. Key Benefits Rugged Lighting Products Electricity Savings Maintenance Savings Features Lead Free RoHS Compliant High Luminance Uniform Color Low Power Consumption Low Thermal Resistance Low Profile Meets SAE/ECE/JIS Automotive Color Requirements Packaged in tubes for use with automatic insertion equipment HPWA HPWT HPWA HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT MH02 MH02 DH02 DH02 RD02 BH02 MD02 RL02 DD02 ML02 BD02 DL02 RH02 BL02 Typical Applications Automotive Exterior Lighting Electronic Signs and Signals Specialty Lighting Outline Drawings Selection Guide Table 1 Total Included Total Flux ΦV (LM) @ 70 mA[1] Device Type HPWA MH02 HPWA DH02 HPWT RD02 HPWT MD02 HPWT DD02 HPWT BD02 HPWT RH02 HPWT MH02 HPWT DH02 HPWT BH02 HPWT RL02 HPWT ML02 HPWT DL02 HPWT BL02 TS AlInGaP Amber 2.5 TS AlInGaP Red Orange 5.0 TS AlInGaP Red 3.8 Angle θ90V (Degrees) [2] Typ. 95 75 44 X 88 100 70 50 44 X 88 100 70 50 44 X 88 100 70 50 LED Color AS AlInGaP Red Orange Typ. 2.0 Notes: 1. Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. (RθJ A = 200°C/W, TA = 25ºC) 2. θ0.90 V is the included angle at which 90% of the total luminous flux is captured. Absolute Maximum Ratings at TA = 25ºC Table 2 Parameter DC Forward Current Power Dissipation Reverse Voltage (IR = 100 mA) Operating Temperature Range Storage Temperature Range High Temperature Chamber LED Junction Temperature Solder Conditions [2] [1] HPWA 70 187 10 HPWT 70 221 10 Units mA mW V ºC ºC 40 to +100 55 to +100 125ºC, 2 Hours 125ºC Preheat Temperature Solder Temperature 85 +/ 15°C, 70 sec +/ 20 sec 250 +/ 5°C, 2.5 +/ 0.5 sec [1.5mm (0.06 in) below seating plane] Notes: 1. De rate as shown in Figures 4a and 4b. 2. See "Recommended Soldering Conditions", Page 8. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 2 Optical Characteristics at TA = 25°C, IF = 70 mA, RθJ A = 200°C/W Table 3 Total Peak Wavelength Device Type HPWA MH02 HPWA DH02 HPWT RD02 HPWT MD02 HPWT DD02 HPWT BD02 HPWT RH02 HPWT MH02 HPWT DH02 HPWT BH02 HPWT RL02 HPWT ML02 HPWT DL02 HPWT BL02 596 594 626 620 640 630 λpeak (nm) Typ. 624 Dominant Wavelength λdom(nm)[1] Typ. 618 Included Angle θ0.90 V (Degrees)[2] Typ. 95 75 44 X 88 100 70 50 44 X 88 100 70 50 44 X 88 100 70 50 Luminous Intensity/ Total Flux Iv(cd)/ Φv(lm) Typ. 0.6 0.9 1.25 0.6 1.5 2.0 1.25 0.6 1.5 2.0 1.25 0.6 1.5 2.0 Viewing Angle 2 θ1/2 (Degrees) Typ. 90 60 25 x 68 70 40 30 25 x 68 70 40 30 25 x 68 70 40 30 Electrical Characteristics at TA=25°C Table 4 Forward Voltage VF (Volts) @ IF = 70mA (HPWA, HPWT) Device Type HPWA xH02 HPWT xD02 HPWT xH02 HPWT xL02 Reverse Breakdown VR (Volts)[1] @ IR = 100 μA Capacitance C (pF) VF = 0, F = 1MHz. Thermal Resistance RθJ PIN (°C/W) Speed of Response τs (ns) [2] Typ. 20 20 20 20 Min 1.83 2.19 2.19 2.19 Typ 2.2 2.6 2.6 2.6 Max 2.67 3.03 3.03 3.15 Min 10 10 10 10 Typ. 20 20 20 20 Typ. 40 40 40 40 Typ. 155 125 125 125 Notes: 1.Operation in reverse bias is not recommended. 2. τs is the time constant, e t/τs. Notes: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. θ0.90 V is the included angle at which 90% of the total lumi nous flux is captured. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 3 Part Number Selection Red Part Number HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT RD02 00000 RD02 D4000 RD02 E4000 RD02 F4000 BD02 00000 BD02 D4000 BD02 E4000 BD02 F4000 DD02 00000 DD02 D4000 DD02 E4000 DD02 F4000 MD02 00000 MD02 D4000 MD02 E4000 MD02 F4000 Viewing Angle 2θ1/2 (Degrees) 25 25 25 25 X 68 X 68 X 68 X 68 30 30 30 30 40 40 40 40 70 70 70 70 Min. Flux[1] Φv (lm) 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 Max Flux Φv (lm) 4.8 6.1 7.3 4.8 6.1 7.3 4.8 6.1 7.3 4.8 6.1 7.3 Minimum Intensity (cd) 1.9 2.5 3.1 3.8 3.0 4.0 5.0 6.0 2.3 3.0 3.8 4.5 0.9 1.2 1.5 1.8 Maximum Intensity (cd) 6.0 7.6 9.1 9.6 12.2 14.6 7.2 9.2 11.0 2.9 3.7 4.4 Note: 1. Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 4 Red Orange Part Number HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWA HPWA HPWA HPWA RH02 00000 RH02 D4000 RH02 E4000 RH02 F4000 RH02 G4000 RH02 H4000 BH02 00000 BH02 D4000 BH02 E4000 BH02 F4000 BH02 G4000 BH02 H4000 DH02 00000 DH02 D4000 DH02 E4000 DH02 F4000 DH02 G4000 DH02 H4000 MH02 00000 MH02 D4000 MH02 E4000 MH02 F4000 MH02 G4000 MH02 H4000 MH02 B4000 DH02 B4000 MH02 C4000 DH02 C4000 Viewing Angle 2θ1/2 (Degrees) 25 25 25 25 25 25 X 68 X 68 X 68 X 68 X 68 X 68 30 30 30 30 30 30 40 40 40 40 40 40 70 70 70 70 70 70 90 40 90 40 Min. Flux Φv (lm) 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.5 2.0 2.5 3.0 3.5 4.0 1.0 1.0 1.5 1.5 Max Flux Φv (lm) 4.8 6.1 7.3 9.7 12.0 4.8 6.1 7.3 9.7 12.0 4.8 6.1 7.3 9.7 12.0 4.8 6.1 7.3 9.7 12.0 3.6 3.6 4.2 4.2 Minimum Intensity (cd) 1.9 2.5 3.1 3.8 4.4 5.0 3.0 4.0 5.0 6.0 7.0 8.0 2.3 3.0 3.8 4.5 5.3 6.0 0.9 1.2 1.5 1.8 2.1 2.4 0.6 1.5 0.9 2.3 Maximum Intensity (cd) 6.0 7.6 9.1 12.1 15.0 9.6 12.2 14.6 19.4 24.0 7.2 9.2 11.0 14.6 18.0 2.9 3.7 4.4 5.8 7.2 2.2 5.4 2.5 6.3 Amber Part Number HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT HPWT RL02 00000 RL02 C4000 RL02 D4000 BL02 00000 BL02 C4000 BL02 D4000 DL02 00000 DL02 C4000 DL02 D4000 ML02 00000 ML02 C4000 ML02 D4000 Viewing Angle 2θ1/2 (Degrees) 25 X 68 25 X 68 25 X 68 30 30 30 40 40 40 70 70 70 Min. Flux Φv (lm) 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0 Max Flux Φv (lm) 4.2 4.8 4.2 4.8 4.2 4.8 4.2 4.8 Minimum Intensity (cd) 1.3 1.9 2.5 2.0 3.0 4.0 1.5 2.3 3.0 0.6 0.9 1.2 Maximum Intensity (cd) 5.3 6.0 8.4 9.6 6.3 7.2 2.5 2.9 Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 5 Figures1 HPWA-XL02 HPWT-XL02 HPWA-XH02 HPWT-XH02 HPWT-XD02 Figure 3. HPWA/HPWT xx02 Relative Luminous Flux Figure 1a. Relative Intensity vs. Wavelength vs. Forward Current. 70 70 MAXIMUM DC CURRENT (mA) 60 50 40 30 20 10 0 0 20 40 60 80 100 FORWARD CURRENT (mA) 60 HPWT 50 Rth(j-a) = 300 C/W Rth(j-a) = 400 C/W Rth(j-a) = 500 C/W Rth(j-a) = 600 C/W HPWA 40 30 20 AMBIENT TEMPERATURE (C) 10 Figure 4a. HPWA xx02 Maximum DC Forward Current 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 vs. Ambient Temperature. FORWARD VOLTAGE (V) Figure 2a. Forward Current vs. Forward Voltage MAXIMUM DC CURRENT (mA) 70 60 50 40 30 20 10 0 0 20 40 60 80 100 Rth(j-a) = 300 C/W Rth(j-a) = 400 C/W Rth(j-a) = 500 C/W Rth(j-a) = 600 C/W AMBIENT TEMPERATURE (C) Figure 4b. HPWT xx02 Maximum DC Forward Current vs. Ambient Temperature. Note: 1.24mm2 of Cu pad per emitter at cathode lead is recom mended for lowest thermal resistance. 1. All Figures Typical unless indicated as Maximum. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 6 Figure 5a. HPWT Rx02 Relative Luminous Intensity vs. Off Axis Angle. Figure 5d. HPWA(T) Dx02 Relative Luminous Intensity vs. Off Axis Angle. Figure 5b. HPWA Mx02 Relative Luminous Intensity vs. Off Axis Angle. Figure 5e. HPWT Bx02 Relative Luminous Intensity vs. Off Axis Angle. Figure 5c. HPWT Mx02 Relative Luminous Intensity vs. Off Axis Angle. 1. All Figures Typical unless indicated as Maximum. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 7 Recommended Soldering Conditions for Pb Free SuperFlux 300 250 Peak o 255 C 217 C o Temperature (deg C) 200 Preheat 150 100 50 0 0 10 20 30 90 s (MAX) 100 oC (MAX) Time (Seconds) 40 50 60 70 80 90 Solder Conditions Preheat Temperatue Preheat Time Peak Profile Temperature Solder Time Above 217ºC 85 +/ 15ºC 70s +/ 20s 250 +/ 5ºC 2.5 +/ 0.5s Note: 1.All top preheat stages are to be turned off so that the lamp body is not directly exposed to the heat source. 2.Profile taken on the LED lead at the bottom of the PCB. 3.Single wave soldering is recommended. Lead Free SuperFlux LEDs Datasheet DS55 (10/06) 8 Company Information LUXEON®, SuperFlux and SnapLED are developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands and production capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid state LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applica tions and markets in the lighting world. www.luxeon.com www.lumiledsfuture.com Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or askluxeon@futureelectronics.com Europe: 00 800 443 88 873 or luxeon.europe@futureelectronics.com ©2006 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or lumileds.asia@futureelectronics.com