L150-5770502400000

ILLUMINATION LUXEON 5050 High lumen, high efficacy, multi-die emitter committed to lowering system cost LUXEON 5050 is a multi-die package LED that provides high luminance from a single package to enable cost effective, single optic and directional fixture designs. LUXEON 5050 uses an industry standard 5050 surface mount package with smallest round Light Emitting Surface (LES). LUXEON 5050 comes in 70CRI, 80CRI and 90CRI with a wide range of CCTs, and offers hot-color targeting to ensure that the LEDs are within color target at application conditions of 85°C. FEATURES AND BENEFITS PRIMARY APPLICATIONS Smallest LES (4.6mm) enables good optic design for great punch Downlights Enable highest efficacy system design by driving at low current High Bay & Low Bay Hot-color targeting ensures color is with ANSI bin at 85°C Lamps Binned within 3-step and 5-step MacAdam ellipse ensuring color uniformity Outdoor Compatible with low cost and high efficacy drivers Spotlights DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 1 Table of Contents General Product Information ......................................................................................................................... 3 Product Test Conditions ............................................................................................................................. 3 Part Number Nomenclature ........................................................................................................................ 3 Lumen Maintenance .................................................................................................................................. 3 Environmental Compliance ......................................................................................................................... 3 Performance Characteristics .......................................................................................................................... 4 Product Selection Guide ............................................................................................................................. 4 Optical Characteristics................................................................................................................................ 4 Electrical and Thermal Characteristics .......................................................................................................... 5 Absolute Maximum Ratings ........................................................................................................................... 5 Characteristics Curves ................................................................................................................................... 6 Spectral Power Distribution Characteristics ................................................................................................... 6 Light Output Characteristics........................................................................................................................ 7 Forward Current Characteristics .................................................................................................................. 8 Radiation Pattern Characteristics ................................................................................................................. 9 Product Bin and Labeling Definitions ........................................................................................................... 10 Decoding Product Bin Labeling.................................................................................................................. 11 Luminous Flux Bins.................................................................................................................................. 10 Color Bin Definitions ................................................................................................................................ 11 Forward Voltage Bins ............................................................................................................................... 12 Mechanical Dimensions ................................................................................................................................ 12 Reflow Soldering Guidelines ........................................................................................................................ 13 JEDEC Moisture Sensitivity ....................................................................................................................... 13 Solder Pad Design ................................................................................................................................... 14 Packaging Information ................................................................................................................................ 14 Pocket Tape Dimensions .......................................................................................................................... 14 Reel Dimensions ..................................................................................................................................... 15 DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON 5050 LEDs are tested and binned with a DC drive current of 160mA at a junction temperature, Tj, of 25ºC. Part Number Nomenclature Part numbers for LUXEON 5050 follow the convention below: L 1 5 0 - A A B B 5 0 2 4 0 0 0 0 0 Where: A A - designates nominal ANSI CCT (27=2700K, 30=3000K, 40=4000K, 50=5000K, 57=5700K) B B - designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) Therefore, the following part number is used for a LUXEON 5050, 3000K 80CRI: L 1 5 0 - 3 0 8 0 5 0 2 4 0 0 0 0 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 5050 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON 5050 at test current, Tj=25°C. NOMINAL [1] CCT MINIMUM CRI 3000K 4000K LUMINOUS FLUX [2] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TEST CURRENT (mA) PART NUMBER MINIMUM TYPICAL 70 521 572 146 160 L150-3070502400000 70 558 610 156 160 L150-4070502400000 5000K 70 558 610 156 160 L150-5070502400000 5700K 70 558 610 156 160 L150-5770502400000 2700K 80 459 504 129 160 L150-2780502400000 3000K 80 473 520 133 160 L150-3080502400000 4000K 80 521 550 140 160 L150-4080502400000 5000K 80 521 550 140 160 L150-5080502400000 2700K 90 402 429 110 160 L150-2790502400000 3000K 90 416 444 113 160 L150-3090502400000 4000K 90 443 473 121 160 L150-4090502400000 Notes for Table 1: 1. Correlated color temperature is based upon mounted die on highly reflective surface at T j=25°C. 2. Lumileds maintains a tolerance of ±2 on CRI and ±7% on luminous flux measurements. Optical Characteristics Table 2. Optical characteristics for LUXEON 5050 at test current, T j=25°C. PART NUMBER L150-xxxx502400000 TYPICAL TOTAL INCLUDED ANGLE 138° [1] TYPICAL VIEWING ANGLE 116° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 4 [2] Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON 5050 at test current, Tj=25°C. FORWARD VOLTAGE [1] (Vf) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD [2] VOLTAGE (mV/°C) 23.5 24.5 26.5 -17 PART NUMBER L150-xxxx502400000 TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W) 1.9 Notes for Table 3: 1. Lumileds maintains a tolerance of ±6% on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON 5050. PARAMETER DC Forward Current MAXIMUM PERFORMANCE [1, 3] 300mA (DC & Pulse) 125°C Peak Pulsed Forward Current LED Junction Temperature [1] 240mA [1, 2] ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Operating Case Temperature Class 2 [1] 105°C LED Storage Temperature -40°C to 105°C Reserve Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: - The frequency of the ripple current is 100Hz or higher - The average current for each cycle does not exceed the maximum allowable DC forward current - The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. At 10% duty cycle with pulse width of 10ms. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 5 Characteristics Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for L150-xxxx502400000 at test current, T j=25°C. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 6 Light Output Characteristics Figure 2. Typical normalized light output vs. junction temperature for L150-xxxx502400000 at test current. Figure 3. Typical normalized light output vs. forward current for L150-xxxx502400000, T j=25°C. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 7 Forward Current Characteristics Figure 4. Typical forward current vs. forward voltage for L150-xxxx502400000, Tj=25°C. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 8 Radiation Pattern Characteristics Figure 5. Typical radiation pattern for L150-xxxx502400000 at test current, Tj=25°C. Figure 6. Typical polar radiation pattern for L150-xxxx502400000 at test current, Tj=25°C. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 9 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins the LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON 5050 LEDs are labeled using a 3-digit alphanumeric CAT code following the format below: A B C Where: A - designates luminous flux bin (example: H=450 to 500 lumens, L=600 to 650 lumens) B - designates color bin (example: 3=3 SDCM, 5=5 SDCM parts) C - designates forward voltage bin (example: A=23.5 to 25.0V) Therefore, a LUXEON 5050 with a lumen range of 600 to 650, color bin of 3 and forward voltage range of 23.5 to 25.0V has the following CAT code: L 3 A Luminous Flux Bins Table 5 lists the standard luminous flux bins for LUXEON 5050 LEDs. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 5050. BIN LUMINOUS FLUX [1] (lm) MINIMUM MAXIMUM G 400 450 H 450 500 J 500 550 K 550 600 L 600 650 M 650 700 N 700 750 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 10 Color Bin Definitions Figure 7. 3- and 5-step MacAdam ellipse illustration for hot-color targeting expected at 85°C. Table 6. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 5050 at test current, hot color targeted at Tj=85°C. MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ (0.4578, 0.4101) 0.00810 0.00420 53.70° (0.4338, 0.4030) 0.00834 0.00408 53.22° Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 5000K Single 3-step MacAdam ellipse (0.3447, 0.3558) 0.00822 0.00354 59.62° 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00745 0.00320 59.09° 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70° 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.22° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72° 5000K Single 5-step MacAdam ellipse (0.3447, 0.3558) 0.01370 0.00590 59.62° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09° COLOR SPACE 2700K Single 3-step MacAdam ellipse 3000K Single 3-step MacAdam ellipse 4000K CENTER POINT (cx, cy) [1] MAJOR AXIS, a NOMINAL CCT Notes for Table 6: 1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE 1931 color space. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 11 Forward Voltage Bins Table 7. Forward voltage bin definitions for LUXEON 5050. FORWARD VOLTAGE [1] (V) BIN MINIMUM MAXIMUM A 23.5 25.0 B 25.0 26.5 Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. Mechanical Dimensions Figure 8. Mechanical dimensions for LUXEON 5050. Notes for Figure 8: 1. Drawings are not scale. 2. All dimensions are in millimeters. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 12 Reflow Soldering Guidelines Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for LUXEON 5050. PROFILE FEATURE LEAD FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat time (tsmin to tsmax) 60 to 180 seconds Ramp-Up Rate (TL to tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for LUXEON 5050. LEVEL 3 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS 168 Hours ≤30°C / 60% RH 192 Hours +5/-0 30°C / 60% RH DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 13 Solder Pad Design Figure 10. Recommended PCB solder pad layout for LUXEON 5050. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Packaging Information Pocket Tape Dimensions Figure 11. Pocket Tape dimensions for LUXEON 5050. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 14 Reel Dimensions Figure 12. Reel dimensions for LUXEON 5050. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS174P LUXEON 5050 Preliminary Product Datasheet 20160802 ©2016 Lumileds Holding B.V. All rights reserved. 15 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDS and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds holding B.V. in the United States and other countries. lumileds.com DS174P LUXEON 5050 Preliminary Product Datasheet 20160829 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.