L1MX-657003V500000

Illumination LUXEON MX Unmatched performance in a proven package LUXEON MX is a high power emitter enabling cost effective, high reliability fixtures for High Bay and Outdoor applications requiring system efficiency of up to 157 lm/W. This breakthrough LED provides double the flux compared to previous generations with an even more robust high power design. Designed to be optically compatible with LUXEON M, LUXEON MX enables luminaire manufacturers to instantly upgrade their systems to market leading efficiency without investing design resources. Features and Benefits Primary Applications 2,000 lumens at 130 lm/W enables cost effective 100 lm/W fixtures High Bay & Low Bay 1,200 lumens at 150 lm/W enables high performance 120 lm/W fixtures Double the flux vs. comparable emitters in 120 lm/W systems More robust package for improved reliability at higher drive currents –– Industrial Outdoor –– Streetlights Same footprint and optically compatible with LUXEON M for an instant upgrade DS179 LUXEON MX Product Datasheet ©2019 Lumileds Holding B.V. All rights reserved. No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Correlated Color Temperature Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON MX LEDs are tested and binned with a DC drive current specified below at a junction temperature, Tj, of 85°C: 700mA – LUXEON MX 12V 1400mA – LUXEON MX 6V 2800mA – LUXEON MX 3V Part Number Nomenclature Part numbers for LUXEON MX follow the convention below: L 1 M X – A A B B C C C D E E E E 0 Where: A A – designates CCT (40=4000K, 50=5000K, 57=5700K, 65=6500K) B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) C C C – designates voltage (12V=12V, 06V=6V, 03V=3V) D – designates color (0=full distribution, 3=3-step, 5=5-step, 7=7-step) E E E E – designates minimum luminous flux (optional) Therefore, the following part number is used for a LUXEON MX 4000K 70CRI, 12V full distribution LED: L 1 M X – 4 0 7 0 1 2 V 0 0 0 0 0 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON MX is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON MX at test current, Tj=85ºC. Voltage 12V 6V 3V Luminous Flux [1] (lm) NOMINAL CCT MINIMUM CRI [1, 2] 2700K 70 970 1050 1095 700 L1MX-277012V000000 3000K 70 1040 1161 1270 700 L1MX-307012V000000 Minimum Typical TYPICAL Tj=25°C Test Current (mA) Part Number 4000K 70 1160 1232 1345 700 L1MX-407012V000000 5000K 70 1160 1232 1345 700 L1MX-507012V000000 5700K 70 1160 1232 1345 700 L1MX-577012V000000 6500K 70 1160 1232 1345 700 L1MX-657012V000000 2700K 80 900 988 1095 700 L1MX-278012V000000 3000K 80 970 1000 1110 700 L1MX-308012V000000 4000K 80 1040 1115 1220 700 L1MX-408012V000000 5000K 80 1040 1115 1220 700 L1MX-508012V000000 2700K 90 730 800 872 700 L1MX-279012V000000 3000K 90 730 835 910 700 L1MX-309012V000000 4000K 90 900 965 1046 700 L1MX-409012V000000 5700K 90 900 965 1046 700 L1MX-579012V000000 2700K 70 970 1050 1095 1400 L1MX-277006V000000 3000K 70 1040 1161 1270 1400 L1MX-307006V000000 4000K 70 1160 1232 1345 1400 L1MX-407006V000000 5000K 70 1160 1232 1345 1400 L1MX-507006V000000 5700K 70 1160 1232 1345 1400 L1MX-577006V000000 6500K 70 1160 1232 1345 1400 L1MX-657006V000000 2700K 80 900 988 1095 1400 L1MX-278006V000000 3000K 80 970 1000 1110 1400 L1MX-308006V000000 4000K 80 1040 1115 1220 1400 L1MX-408006V000000 5000K 80 1040 1115 1220 1400 L1MX-508006V000000 2700K 90 730 800 872 1400 L1MX-279006V000000 3000K 90 730 835 910 1400 L1MX-309006V000000 4000K 90 900 965 1046 1400 L1MX-409006V000000 5700K 90 900 965 1046 1400 L1MX-579006V000000 2700K 70 970 1050 1095 1400 L1MX-277003V000000 3000K 70 1040 1161 1270 1400 L1MX-307003V000000 4000K 70 1160 1232 1345 2800 L1MX-407003V000000 5000K 70 1160 1232 1345 2800 L1MX-507003V000000 5700K 70 1160 1232 1345 2800 L1MX-577003V000000 6500K 70 1160 1232 1345 2800 L1MX-657003V000000 2700K 80 900 988 1095 2800 L1MX-278003V000000 3000K 80 970 1000 1110 2800 L1MX-308003V000000 4000K 80 1040 1115 1220 2800 L1MX-408003V000000 5000K 80 1040 1115 1220 2800 L1MX-508003V000000 2700K 90 730 800 872 2800 L1MX-279003V000000 3000K 90 730 835 910 2800 L1MX-309003V000000 4000K 90 900 965 1046 2800 L1MX-409003V000000 5700K 90 900 965 1046 2800 L1MX-579003V000000 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Table 2. Optical characteristics for LUXEON MX at test current, Tj=85°C. Part Number Typical Total Included Angle [1] Typical Viewing Angle [2] L1MX-xxxxxxxxxxxx0 140° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON MX at test current, Tj=85°C. Forward Voltage [1] (Vf) Typical Thermal Resistance—Junction to Solder Pad (°C/W) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) L1MX-xxxx12Vxxxxx0 10.50 11.30 11.70 -5.50 1.25 L1MX-xxxx06Vxxxxx0 5.25 5.65 6.00 -2.75 1.25 L1MX-xxxx03Vxxxxx0 2.63 2.83 3.00 -1.38 1.25 Part Number Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 135°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON MX. Parameter Maximum Performance DC Forward Current [1, 2] 1500mA for L1MX-xxxx12Vxxxxx0 3000mA for L1MX-xxxx06Vxxxxx0 6000mA for L1MX-xxxx03Vxxxxx0 Peak Pulsed Forward Current [1, 3] 1750mA for L1MX-xxxx12Vxxxxx0 3500mA for L1MX-xxxx06Vxxxxx0 7000mA for L1MX-xxxx03Vxxxxx0 LED Junction Temperature [1] (DC & Pulse) 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40°C to 120°C at 700mA for L1MX-xxxxxxxxxxxx0 LED Storage Temperature -40°C to 120°C Soldering Temperature JEDEC 020D 250°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. At 10% duty cycle with pulse width of 10ms. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 4 Operating Conditions Drive Current If2 If1 0 -40 120 135 If1 [mA] If2 [mA] LUXEON MX 3V 4800 6000 LUXEON MX 6V 2400 3000 LUXEON MX 12V 1200 1500 Juncon Temperature [°C] Figure 1. Maximum permissible operating conditions for LUXEON MX. Notes for Figure 1: 1. The shaded area in this graph reflects the maximum permissible operating conditions for LUXEON MX. Characteristic Curves Spectral Power Distribution Characteristics Figure 2. Typical normalized power vs. wavelength for L1MX-xx70xxxxxxxx0 at test current, Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 5 Light Output Characteristics Figure 3. Typical normalized light output vs. junction temperature for L1MX-xxxxxxxxxxxx0 at test current. Figure 4a. Typical normalized light output vs. forward current for L1MX-xxxx12Vxxxxx0 at Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 6 Figure 4b. Typical normalized light output vs. forward current for L1MX-xxxx06Vxxxxx0 at Tj=85°C. Figure 4c. Typical normalized light output vs. forward current for L1MX-xxxx03Vxxxxx0 at Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 7 Forward Current Characteristics Figure 5a. Typical forward current vs. forward voltage for L1MX-xxxx12Vxxxxx0 at Tj=85°C. Figure 5b. Typical forward current vs. forward voltage for L1MX-xxxx06Vxxxxx0 at Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 8 Figure 5c. Typical forward current vs. forward voltage for L1MX-xxxx03Vxxxxx0 at Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 9 Radiation Pattern Characteristics Figure 6. Typical radiation pattern for L1MX-xxxxxxxxxxxx0 at test current, Tj=85°C. Figure 7. Typical polar radiation pattern for L1MX-xxxxxxxxxxxx0 at test current, Tj=85°C. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 10 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON MX LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A – designates luminous flux bin (example: M=630 to 680 lumens, T=970 to 1040 lumens) B – designates correlated color temperature (CCT) bin (example: 1=6500K, 2=5700K, 3=5000K, 5=4000K) C – designates color bin (example: 3=3-step, 5=5-step, 7=7-step) D – designates forward voltage bin (example: F=10.50 to 11.00V, G=11.00 to 11.50V) Therefore, a LUXEON MX 12V with a lumen range of 630 to 680, color bin of 4000K, 5-step MacAdam ellipse and a forward voltage range of 10.50 to 11.00V has the following CAT code: M 5 5 F Luminous Flux Bins Table 5 lists the standard luminous flux bins for LUXEON MX emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON MX, Tj=85°C. Bin Luminous Flux [1] (lm) Minimum Maximum J 510 550 K 550 590 L 590 630 M 630 680 N 680 730 P 730 780 Q 780 840 R 840 900 S 900 970 T 970 1040 U 1040 1120 V 1120 1200 W 1200 1240 X 1240 1280 Y 1280 1320 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 11 Color Bin Definitions Figure 8. 3-, 5- and 7-step MacAdam ellipse illustration for Table 6. Table 6. 3-, 5- and 7-step MacAdam ellipse color bin definitions for LUXEON MX, Tj=85°C. Nominal CCT Color Space Center Point [1] (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle, θ 2700K Single 3-step MacAdam ellipse 0.4578, 0.4101 0.00810 0.00420 53.70° 3000K Single 3-step MacAdam ellipse 0.4338, 0.4030 0.00834 0.00408 53.22° 4000K Single 3-step MacAdam ellipse 0.3818, 0.3797 0.00939 0.00402 53.72° 5000K Single 3-step MacAdam ellipse 0.3447, 0.3553 0.00822 0.00354 59.62° 2700K Single 5-step MacAdam ellipse 0.4578, 0.4101 0.01350 0.00700 53.70° 3000K Single 5-step MacAdam ellipse 0.4338, 0.4030 0.01390 0.00680 53.22° 4000K Single 5-step MacAdam ellipse 0.3818, 0.3797 0.01565 0.00670 53.72° 5000K Single 5-step MacAdam ellipse 0.3447, 0.3553 0.01370 0.00590 59.62° 5700K Single 5-step MacAdam ellipse 0.3287, 0.3417 0.01243 0.00533 59.09° 6500K Single 5-step MacAdam ellipse 0.3123, 0.3282 0.01115 0.00475 58.57° 6500K Single 7-step MacAdam ellipse 0.3123, 0.3282 0.01561 0.00665 58.57° Notes for Table 6: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. Correlated Color Temperature Bins Table 7. Correlated color temperature bin definitions for LUXEON MX. Bin CCT 1 6500K 2 5700K 3 5000K 5 4000K 7 3000K 8 2700K DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 12 Forward Voltage Bins Table 8. Forward voltage bin definitions for LUXEON MX, Tj=85°C. Part Number BIN L1MX-xxxx12Vxxxxx0 L1MX-xxxx06Vxxxxx0 L1MX-xxxx03Vxxxxx0 Forward Voltage [1] (Vf) Minimum Maximum F 10.50 11.00 G 11.00 11.50 H 11.50 11.70 F 5.25 5.50 G 5.50 5.75 H 5.75 6.00 F 2.63 2.75 G 2.75 2.88 H 2.88 3.00 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. Mechanical Dimensions 7.00±0.12 3.75±0.12 3.50±0.15 3.14±0.10 R0.20±0.04 0.56±0.08 3.50±0.15 3.14±0.10 7.00±0.12 6.40 0.06 Figure 9. Mechanical dimensions for LUXEON MX. Notes for Figure 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 13 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 9. Table 9. Reflow profile characteristics for LUXEON MX. PROFILE FEATURE Lead-Free Assembly Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 250°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 10. Moisture sensitivity levels for LUXEON MX. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 14 Solder Pad Design Figure 11. Recommended PCB solder pad layout for LUXEON MX. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 15 Packaging Information Pocket Tape Dimensions DIRECTION OF FEED 12.00mm POCKET PITCH 4.99 4.59 1.50 1.59 B B 4° 16.00 7.50 1.50 1.75 2.00 4.00mm INDEX HOLE PITCH 8° 0.38 7.35 SQ. 4.11 4.49 SECTION B-B SCALE 2 : 1 4.99 5.35 -DEVICE ORIENTATIONNON-FIDUCIAL CORNER LOCATEDAS SHOWN F DETAIL E SCALE 4 : 1 -LOADED POCKETS500 -LEADER50 EMPTY POCKETS -TAPE END30 EMPTY POCKETS EF DIRECTION OF FEED Figure 12. Pocket tape dimensions for LUXEON MX. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 16 Reel Dimensions 20.8mm OUTSIDE WIDTH 16.4mm INSIDE WIDTH 330.00 REEL DIAMETER 13.00mm ARBOR HOLE DIAMETER COVER TAPE DIRECTION OF FEED CARRIER TAPE TAPE REEL Figure 13. Reel dimensions for LUXEON MX. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS179 LUXEON MX Product Datasheet 20190220 ©2019 Lumileds Holding B.V. All rights reserved. 17 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world better, safer, more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2019 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS179 LUXEON MX Product Datasheet 20190220 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.