Illumination
LUXEON SunPlus
Series for Horticulture
LEDs engineered to deliver the precise
wavelengths of light needed to improve
crop yield
The LUXEON SunPlus Series is purpose-built to enable ease of system
design for Horticulture applications. The LUXEON SunPlus Series offers
the only LEDs available today that are binned and tested based on
Photosynthetic Photon Flux (PPF). The LUXEON SunPlus Series includes
two different packages: LUXEON SunPlus 20 Line, which is 2.0mm x
2.0mm and LUXEON SunPlus 35 Line, which is 3.5mm x 3.5mm. The
LUXEON SunPlus Series includes options for single driver solutions and
multi-channel, color tunable solutions.
Features and Benefits
Primary Applications
120° and 150° viewing angle of choice for various design needs
Horticulture
Two package options 2.0mm x 2.0mm and 3.5mm x 3.5mm for
design freedom
No. E352519 / E507562
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet ©2021 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Photon Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PPF Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON SunPlus Series LEDs are tested and binned with a DC drive current and junction temperature specified below:
LUXEON SunPlus 20 Line
–
350mA, Tj=85°C
LUXEON SunPlus 35 Line
–
100mA, Tj=25°C
Part Number Nomenclature
Part numbers for LUXEON SunPlus Series follow the convention below:
L 1 S P – A A A B B 0 C C D 0 0 0 0
Where:
A A A – designates color (FRD=Far Red, DRD=Deep Red, PRP=Purple, RYL=Royal Blue, LME=Lime and CW9=Cool White)
B B
– designates typical percentage of PPF in the blue spectrum (420 to 480nm) vs. the total PPF in the
Photosynthetic Active Radiation (PAR) region (400 to 700nm), which applies only to purple LEDs (00=2.5%,
10=12.5% and 20=25%)
C C
– designates package size (20=2.0mm2 in 150° dome, 2F=2.0mm2 in 120° dome and 35=3.5mm2)
D
– designates polarity (R=reverse polarity)
Therefore, the following part number is used for a LUXEON SunPlus 20 Royal Blue LED with a package size of 2.0mm2 in 150° dome:
L 1 S P – R Y L 0 0 0 2 0 0 0 0 0 0
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON SunPlus
Series is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1a. Product performance of LUXEON SunPlus 20 Line at 350mA, Tj=85°C.
Peak Wavelength
(nm)
Color
Minimum
720
Far Red
Maximum
750
Deep Red
655
670
Royal Blue
445
455
Lime
–
–
Cool White
–
–
PPF (µmol/s) [1]
in PAR (400 to 700nm) [2]
Minimum
Typical
PPF/W
TYPICAL
(µmol/J)
1.10
1.37 [3]
2.26
Part
Number
L1SP-FRD0002000000
1.60
1.96
2.95
L1SP-FRD0002F00000
1.60
1.81
2.65
L1SP-DRD0002000000
1.70
2.08
2.90
L1SP-DRD0002F00000
1.90
2.04
2.11
L1SP-RYL0002000000
1.90
2.25
2.30
L1SP-RYL0002F00000
1.50
1.59
1.66
L1SP-LME0002000000
1.50
1.62
1.66
L1SP-LME0002F00000
1.40
1.51
1.57
L1SP-CW90002000000
1.60
1.70
1.73
L1SP-CW90002F00000
Part
Number
Table 1b. Product performance of LUXEON SunPlus 35 Line at 100mA, Tj=25°C.
Peak Wavelength
(nm)
Color
Purple (2.5% Blue)
[4]
Purple (12.5% Blue) [5]
Purple (25% Blue)
Lime
[6]
PPF (µmol/s) [1]
in PAR (400 to 700nm) [2]
Minimum
Maximum
Minimum
Typical
PPF/W
TYPICAL
(µmol/J)
–
–
0.45
0.51
1.80
L1SP-PRP0003500000
–
–
0.50
0.58
2.02
L1SP-PRP1003500000
–
–
0.55
0.63
2.24
L1SP-PRP2003500000
–
–
0.60
0.65
2.13
L1SP-LME0003500000
Notes for Tables 1a and 1b:
1. Lumileds maintains a tolerance of ±6.5% on µmol/s for LUXEON SunPlus 20 Line and ±7.5% on µmol/s measurements for LUXEON SunPlus 35 Line.
2. PAR is the photosynthetic active radiation from 400 to 700nm.
3. Far Red typical PPF is measured from 700 to 800nm.
4. PPF in blue spectrum (420–480nm) ranges from 0–5% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 2.5%.
5. PPF in blue spectrum (420–480nm) ranges from 10–15% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 12.5%.
6. PPF in blue spectrum (420–480nm) ranges from 20–30% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 25%
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2. Optical characteristics for LUXEON SunPlus Series at specified test conditions.
Part Number
TYPICAL SPECTRAL
HALF-WIDTH [1] (nm)
TYPICAL TEMPERATURE
COEFFICIENT OF PEAK
WAVELENGTH (nm/°C)
Typical Total
Included Angle [2]
Typical
Viewing Angle [3]
L1SP-FRD0002000000
34
0.18
175°
162°
L1SP-FRD0002F00000
34
0.18
161°
122°
L1SP-DRD0002000000
22
0.16
175°
162°
L1SP-DRD0002F00000
22
0.16
160°
122°
L1SP-RYL0002000000
20
0.07
175°
165°
L1SP-RYL0002F00000
20
0.07
163°
123°
L1SP-LME0002000000
–
–
170°
145°
L1SP-LME0002F00000
–
–
160°
114°
L1SP-CW90002000000
–
–
170°
150°
L1SP-CW90002F00000
–
–
152°
110°
L1SP-PRPxx03500000
–
–
140°
115°
L1SP-LMExxx3500000
110
0.01
140°
115°
Notes for Table 2:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
2. Total angle at which 90% of the total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON SunPlus Series at specified test conditions.
Part Number
Forward Voltage [1] (Vf)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
Typical Thermal
Resistance—Junction
to Solder Pad (°C/W)
L1SP-FRD0002x00000
1.50
1.90
2.30
-2.8
3.5
L1SP-DRD0002x00000
1.50
2.05
2.30
-2.3
3.5
L1SP-RYL0002x00000
2.50
2.80
3.50
-2.2
2.8
L1SP-LME0002x00000
2.50
2.80
3.50
-2.8
2.8
L1SP-CW90002x00000
2.50
2.80
3.50
-2.2
2.8
L1SP-PRPxx03500000
2.70
2.80
3.10
-2.0 to -4.0
8.0
L1SP-LME0003500000
2.80
3.05
3.50
-1.7
25.0
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4a. Absolute maximum ratings for LUXEON SunPlus 20 Line.
Parameter
FAR RED
DC Forward Current
[1, 2]
Peak Pulsed Forward Current [1, 3]
LED Junction Temperature
[1]
DEEP RED
ROYAL BLUE
LIME
COOL WHITE
700mA
1050mA
700mA
1050mA
1050mA
1225mA
1225mA
875mA
1300mA
875mA
1300mA
1300mA
1550mA
1550mA
135°C
120°C
135°C
120°C
135°C
135°C
135°C
-40 to 125°C
-40 to 110°C
-40 to 125°C
(DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B
-40 to 125°C
Operating Case Temperature [1]
-40 to 125°C
LED Storage Temperature
-40°C to 135°C
Soldering Temperature
20°C to 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Table 4b. Absolute maximum ratings for LUXEON SunPlus 35 Line.
Parameter
DC Forward Current [1, 2]
Peak Pulsed Forward Current
[1, 3]
LED Junction Temperature [1] (DC & Pulse)
PURPLE
LIME
300mA
200mA
350mA
240mA
125°C
125°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature
LED Storage Temperature
[1]
Class 2
-40°C to 105°C
-40°C to 105°C
-40°C to 105°C
-40°C to 105°C
Soldering Temperature
20°C to 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Tables 4a and 4b:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude of ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse-on time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 220uA.
5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
5
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LUXEON SunPlus 20 Line at 350mA, Tj=85°C.
Figure 1b. Typical normalized power vs. wavelength for LUXEON SunPlus 35 Line at 100mA, Tj=25°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
6
Photon Output Characteristics
Figure 2a. Typical normalized photon output vs. junction temperature for LUXEON SunPlus 20 Line at 350mA.
Figure 2b. Typical normalized photon output vs. junction temperature for LUXEON SunPlus 35 Line at 100mA.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
7
Figure 2c. Typical normalized photon output vs. forward current for LUXEON SunPlus 20 Line at Tj=85ºC.
Figure 2d. Typical normalized photon output vs. forward current for LUXEON SunPlus 35 Line at Tj=25°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
8
Forward Current Characteristics
Far Red
Deep Red
Royal Blue
Lime
Cool White
Figure 3a. Typical forward current vs. forward voltage for LUXEON SunPlus 20 Line at Tj=85ºC.
Figure 3b. Typical forward current vs. forward voltage for LUXEON SunPlus 35 Line at Tj=25°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
9
Radiation Pattern Characteristics
Figure 4a. Typical radiation pattern for LUXEON SunPlus 20 Line at 350mA, Tj=85°C.
Figure 4b. Typical radiation pattern for LUXEON SunPlus 35 Line at 100mA, Tj=25°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
10
Figure 5a. Typical polar radiation pattern for LUXEON SunPlus 20 Line at 350mA, Tj=85°C.
Figure 5b. Typical polar radiation pattern for LUXEON SunPlus 35 Line at 100mA, Tj=25°C.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
11
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
All emitters packaged within a reel are of the same bin combination.
LUXEON SunPlus 20 Line and LUXEON SunPlus 35 Line LEDs are labeled using a 4-digit alphanumeric CAT code following the
format below:
A B B C
Where:
A
–
designates PPF bin (example: L=1.80 to 1.90 µmol/s, M=1.90 to 2.00 µmol/s)
B B –
designates color or peak wavelength bin (example: 40=445 to 450nm, 50=450 to 455nm)
C
designates forward voltage bin (example: E=2.50 to 2.70V, F=2.70 to 2.90V)
–
Therefore, LUXEON SunPlus 20 Royal Blue with a PPF range of 1.90 to 2.00 µmol/s, peak wavelength of 445 to 450nm and a
forward voltage range of 2.70 to 2.90V has the following CAT code:
M 4 0 F
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
12
PPF Bins
Tables 5a and 5b list the standard PPF bins for LUXEON SunPlus Series. Although several bins are outlined, product availability in
a particular bin varies by production run and by product performance.
Table 5a. PPF bin definitions for LUXEON SunPlus 20 Line.
Bin
A
PPF [1] (µmol/s)
Minimum
Maximum
0.80
0.90
B
0.90
1.00
C
1.00
1.10
D
1.10
1.20
E
1.20
1.30
F
1.30
1.40
G
1.40
1.50
H
1.50
1.60
J
1.60
1.70
K
1.70
1.80
L
1.80
1.90
M
1.90
2.00
N
2.00
2.10
P
2.10
2.20
Q
2.20
2.30
R
2.30
2.40
S
2.40
2.50
Notes for Table 5a:
1. Lumileds maintains a tolerance of ±6.5% on µmol/s measurements.
Table 5b. PPF bin definitions for LUXEON SunPlus 35 Line.
Bin
PPF [1] (µmol/s)
Minimum
Maximum
X
0.30
0.35
Y
0.35
0.40
Z
0.40
0.45
A
0.45
0.50
B
0.50
0.55
C
0.55
0.60
D
0.60
0.65
E
0.65
0.70
F
0.70
0.75
G
0.75
0.80
H
0.80
0.85
J
0.85
0.90
K
0.90
0.95
L
0.95
1.00
Notes for Table 5b:
1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
13
Color Bin Definitions
Table 6. Color bin definitions for LUXEON SunPlus Series.
PRODUCT
LUXEON SunPlus 20
LUXEON SunPlus 35
COLOR
BIN [1]
Lime
10
Cool White
50
Purple (2.5% Blue)
H1
Purple (12.5% Blue)
H3
Purple (25% Blue)
H5
Lime
L1
Notes for Table 6:
1. Lumileds maintains a tester tolerance of + 0.005 on color bin coordinates
Peak Wavelength Bins
Table 7. Peak wavelength bins for LUXEON SunPlus Series at specified test conditions.
PRODUCT
LUXEON SunPlus 20
COLOR
BIN
Far Red
Deep Red
Royal Blue
PEAK WAVELENGTH [1] (nm)
Minimum
Maximum
10
720
750
10
655
670
40
445
450
50
450
455
Notes for Table 7:
1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.
Forward Voltage Bins
Table 8. Forward voltage bin definitions for LUXEON SunPlus Series at specified test conditions.
PRODUCT
LUXEON SunPlus 20 Line
LUXEON SunPlus 35 Line
COLOR
Far Red
Deep Red
Royal Blue
Lime
Cool White
Purple
Lime
BIN
Forward Voltage [1] (Vf)
Minimum
Maximum
Z
1.50
1.70
A
1.70
1.90
B
1.90
2.10
C
2.10
2.30
D
2.30
2.50
E
2.50
2.70
F
2.70
2.90
G
2.90
3.10
H
3.10
3.30
J
3.30
3.50
S
2.70
2.80
T
2.80
2.90
V
2.90
3.00
W
3.00
3.10
X
3.10
3.20
Y
3.20
3.30
Z
3.30
3.50
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements for LUXEON SunPlus 20 Line and ±0.1V for LUXEON SunPlus 35 Line.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
14
Mechanical Dimensions
Figure 6a. Mechanical dimensions for L1SP-xxx0002000000.
Figure 6b. Mechanical dimensions for L1SP-xxx0002F00000.
Notes for Figures 6a and 6b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
15
Figure 6c. Mechanical dimensions for L1SP-PRPxx03500000.
Figure 6d. Mechanical dimensions for L1SP-LME0003500000.
Notes for Figures 6c and 6d:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
16
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
Temperature
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 7. Visualization of the acceptable reflow temperature profile as specified in Table 9.
Table 9. Reflow profile characteristics for LUXEON SunPlus Series.
Lead-Free Assembly
PROFILE FEATURE
LUXEON SunPlus 20 Line
Preheat Minimum Temperature (Tsmin)
LUXEON SunPlus 35 Line
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 10. Moisture sensitivity levels for LUXEON SunPlus Series.
PRODUCT
level
LUXEON SunPlus 20 Line
LUXEON SunPlus 35 Line
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
1
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
2
1 Year
≤30°C / 60% RH
168 Hours +5 / -0
85°C / 60% RH
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
17
Solder Pad Design
Figure 8a. Recommended PCB solder pad layout for LUXEON SunPlus 20 Line.
2.60
2.40
0.82
1.02
Solder mask
0.25
0.65
0.30
Stencil
Top copper
Package geometric center
1.93
1.80
2.13
Package and pad outlines
0.50
0.50
Figure 8b. Recommended PCB solder pad layout for LUXEON SunPlus 35 Line.
Notes for Figures 8a and 8b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
18
Packaging Information
Pocket Tape Dimensions
B
A
A
B
Figure 9a. Pocket tape dimensions for L1SP-xxx0002000000.
Figure 9b. Pocket tape dimensions for L1SP-xxx0002F00000.
Notes for Figures 9a and 9b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
19
1,75±0,1
,2
+0
5
3,8±0,1
,5 -0
Ø1
8±0,1
1,2±0,1
3,95±0,1
5,5±0,05
2±0,05
12+0,3
-0,1
,1
+0
,5 -0
Ø1
4±0,1
0,28±0,02
Figure 9c. Pocket tape dimensions for LUXEON SunPlus 35 Line.
Notes for Figure 9c:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Reel Dimensions
Figure 10a. Reel dimensions for LUXEON SunPlus 20 Line.
Notes for Figure 10a:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
20
100 +/-0.5
329
Ø 13
+0
,1-0 ,5
,2
18.4 (max, measure at hub)
1.5
n
mi
+2
12,4-0
Figure 10b. Reel dimensions for LUXEON SunPlus 35 Line.
Notes for Figure 10b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS171 LUXEON SunPlus Series for Horticulture Product Datasheet 20210614 ©2021 Lumileds Holding B.V. All rights reserved.
21
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world better, safer, more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2021 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS171 LUXEON SunPlus Series for Horticulture
Product Datasheet 20210614
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
