LXCL-PWM1

Technical Datasheet DS50 power light source LUXEON Flash Module ® Introduction LUXEON® Flash is a family of ultra compact light sources specifically designed and tested for use as a camera flash in space constrained, portable digital imaging applications. The LUXEON Flash products are based on proven LUXEON technology and provide the highest levels of light output available for a solid state light source. The uniquely bright source density characteristics of the LUXEON Flash products will provide greater amounts of light where needed, enabling higher resolu tion pictures to be taken in lower level ambient light environments at greater distances. Camera cell phones, digital still cameras and PDAs can all incorporate LUXEON Flash into sleek designs while maintaining high levels of light output. Features Highest illuminance per LED on the market Very small emitter size Integrated lens for optimal radiation patterns for Camera Flash Integrated Thermal Solution Rear or Side Mountable Surface Mountable Benefits High lux and long distances (3m) Enables higher resolution pictures in darker environ ments Small emitter size allows for smaller overall package size Flexible Integration Options Suitable for Multiple Designs Typical Applications Wireless camera phones Digital still cameras Table of Contents Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Electrical and Optical Characteristics, TJ = 25ºC . . . . . . . . . . . . . . . . . . . . . . . .4 Typical Forward Voltage (VF) vs. Drive Current (IF), TJ = 25ºC . . . . . . . . . . . . .5 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Typical Wavelength Characteristics, TJ = 25ºC . . . . . . . . . . . . . . . . . . . . . . . . . .6 Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Typical Change in Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Reel Packaging (LXCL-PWM1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 LUXEON Flash Module Datasheet DS50 (6/06) 2 Mechanical Dimensions LXCL PWM1 Anode + - Notes: 1. Drawings not to scale. 3. All dimensions are in millimeters. 4. Measurements without tolerances are for reference only . LUXEON Flash Module Datasheet DS50 (6/06) 3 Electrical and Optical Characteristics, TJ = 25ºC1, 2, 3, 4, 5, 6 Table 1. Part Number Current (mA) Parameter Illuminance (at 1m distance) Forward Voltage Min. 28 3.2 5000 Typ. 45 3.8 7000 0.2 2.0 Max. Units lux 4.8 10000 V K Ω mV/°C °C/W LXCL PWM1 1000 Color Temperature Dynamic Resistance7 Temp Coefficient of Forward Voltage7 Thermal Resistance, Junction to Case 7 10 70 70 60 60 Illuminance at 1m distance (lux) 40 40 30 30 20 20 10 10 0 0 200 400 600 800 0 1000 Forward Current (mA) Figure 1. Axial Intensity (cd) and Illuminance (lux) vs. Drive Current, TJ = 25°C Notes for Table 1 & Figure 1: 1. Minimum illuminance performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of 10% on illuminance measurements. 2. LUXEON types with even higher luminous flux levels will become available in the future. Please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative for more information. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. All values assume a junction temperature TJ of 25°C. For flash modes, it is recommended that the drive current be as high as possible (up to 1000 mA) for optimal results. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. Measured between 25°C ≤ TJ ≤ 110°C at IF = 1000mA. 3. 4. 5. 6. 7. LUXEON Flash Module Datasheet DS50 (6/06) 4 Luminous Intensity (cd) 50 50 Typical Forward Voltage (VF) vs. Drive Current (IF), TJ = 25ºC 1000 900 800 Forward Current (mA) 700 600 500 400 300 200 100 0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Forward Voltage (V) Figure 2. Typical Forward Voltage (VF) vs. Drive Current (IF), TJ = 25ºC Absolute Maximum Ratings Table 2. Parameter Max DC Operating Current (mA) Peak Pulsed Forward Current (mA) ESD Sensitivity[1] (volts HBM) LED Junction Temperature (°C) Storage Temperature (°C) Reflow Soldering Temperature (°C) Ambient Operating Temperature (°C) Moisture Sensitivity Level (JEDEC STD 020C) [2] Value 200 1000 2000 135 40 to +120 260 for 5 seconds max 40 to +85 1 Unlimited floor life (out of bag) at factory ambient Notes for Table 2: 1. LUXEON Flash Modules are not designed to be driven in reverse bias. Philips Lumileds does not guarantee at reverse bias conditions. 2. Tested in continuous drive mode. LUXEON Flash Module Datasheet DS50 (6/06) 5 Typical Wavelength Characteristics, TJ = 25ºC Relative Spectral Power Distribution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 nm 600 650 700 750 800 Figure 3. White Color Spectrum of Typical CCT Part, Integrated Measurement. 1.10 1.00 0.90 0.80 Relative Intensity 0.70 0.60 0.50 0.40 0.30 0.20 0.10 -90 -60 -30 0 degrees Figure 4. Typical Intensity Distribution. Horizontal Vertical 1.10 1.00 0.90 0.80 Relative Illuminance 0.70 0.60 0.50 0.40 0.30 0.20 0.10 Horizontal Vertical 30 60 90 0 .00 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 degre es Figure 5. Typical Illuminance Distribution. Notes for Figures 3, 4 and 5: 1. Illuminance, measured in lux (lumens/m2), drives the response of camera module. 2. Field of view (FOV) for typical camera module is 56 x 44 degrees . Vertical Horizontal LUXEON Flash Module Datasheet DS50 (6/06) 6 Derating Curves 1200 1000 Peak Pulse Current (mA) 800 600 Pulse time < 300 msec 400 200 0 -40 -20 0 20 40 60 80 100 Temperature (C-ambient) Figure 6a. Pulse Current Derating Curve 500 450 400 Forward Current (mA) 350 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Temperature (C-ambient) Rth,j-a = 100 °C/W Rth,j-a = 200 °C/W Rth,j-a = 350 °C/W Figure 6b. Forward Current Derating Curve (DC) LUXEON Flash Module Datasheet DS50 (6/06) 7 Typical Change in Color 7100 7000 6900 Color Temperature (K) 6800 6700 6600 6500 6400 6300 6200 0 200 400 600 800 1000 1200 Forward Current (mA) Figure 7. Typical Change in Color vs. Change in Forward Current. 7800 7600 Color Temperature (K) 7400 7200 7000 6800 6600 6400 -60 -40 -20 0 20 40 60 80 100 Temperature (deg. C) Figure 8. Typical Change in Color vs. Change in Temperature. Note: Tests performed in pulse mode. LUXEON Flash Module Datasheet DS50 (6/06) 8 Solder Pad Design Figure 9. Recommended Solder Pad Design. Notes for Figure 9: 1. All dimensions are in MM. 2. Tolerance +/ 0.05MM. Relative Part Orientation LUXEON Flash Module Datasheet DS50 (6/06) 9 Reel Packaging (LXCL PWM1) Figure 10. Reel dimensions and orientation. LUXEON Flash Module Datasheet DS50 (6/06) 10 Company Information LUXEON®, SuperFlux and SnapLED are developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands and production capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid state LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applica tions and markets in the lighting world. www.luxeon.com www.lumiledsfuture.com Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or askluxeon@futureelectronics.com Europe: 00 800 443 88 873 or luxeon.europe@futureelectronics.com ©2006 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or lumileds.asia@futureelectronics.com