LXHL-DE01

Technical Datasheet DS25 power light source LUXEON Emitter ® Introduction LUXEON® is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. Features Highest flux per LED family in the world Very long operating life (up to 100k hours) Available in White, Green, Blue, Royal Blue, Cyan, Red, Red Orange, and Amber Lambertian, Batwing or Side Emitting radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam, safe to the touch Instant light (less than 100 ns) Fully dimmable No UV Superior ESD protection LUXEON Emitters give you total design freedom and unmatched bright ness, creating a new world of light. LUXEON Emitters can be purchased in reels for high volume assembly. For more information, consult your local Lumileds representative. For high volume applications, custom LUXEON power light source designs are available upon request, to meet your specific needs. Typical Applications Reading lights (car, bus, aircraft) Portable (flashlight, bicycle) Mini accent/Uplighters/ Downlighters/Orientation Fiber optic alternative/ Decorative/Entertainment Bollards/Security/Garden Cove/Undershelf/Task Traffic signaling/Beacons/ Rail crossing and Wayside Indoor/Outdoor Commercial and Residential Architectural Automotive Ext (Stop Tail Turn, CHMSL, Mirror Side Repeat) Edge lit signs (Exit, point of sale) LCD Backlights/Light Guides LUXEON Emitter is available in white, green, blue, royal blue, cyan, red, red orange and amber. Mechanical Dimensions Batwing Drawings not to scale Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. All dimensions are in millimeters. 3. All dimensions without tolerances are for reference only. Lambertian Drawings not to scale Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. All dimensions are in millimeters. 3. All dimensions without tolerances are for reference only. LUXEON Emitter DS25 (5/07) 2 Mechanical Dimensions, Continued Side Emitting Drawings not to scale Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Caution must be used in handling this device to avoid damage to the lens surfaces that will reduce optical efficiency. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. LUXEON Emitter DS25 (5/07) 3 Flux Characteristics at 350mA, Junction Temperature, TJ = 25ºC Table 1. Color White[5] Warm White Green Cyan Blue[3] Royal blue[4] Red Red Red Orange Amber Amber White Green Cyan Blue[3] Royal Blue[4] Red Red Orange Amber White Green Cyan Blue[3] Royal blue[4] Red Red Orange Amber LUXEON Emitter LXHL BW02 LXHL BW03 LXHL BM01 LXHL BE01 LXHL BB01 LXHL BR02 LXHL BD01 LXHL BD03 LXHL BH03 LXHL BL01 LXHL BL03 LXHL PW01 LXHL PM01 LXHL PE01 LXHL PB01 LXHL PR03 LXHL PD01 LXHL PH01 LXHL PL01 LXHL DW01 LXHL DM01 LXHL DE01 LXHL DB01 LXHL DR01 LXHL DD01 LXHL DH01 LXHL DL01 Minimum Luminous Flux (lm) or Radiometric Power (mW) ΦV [1,2] 30.6 13.9 30.6 30.6 8.2 145 mW 13.9 30.6 39.8 10.7 23.5 30.6 30.6 30.6 8.2 145 mW 30.6 39.8 23.5 23.5 23.5 23.5 8.2 115 mW 30.6 39.8 23.5 Typical Luminous Flux (lm) or Radiometric Power (mW) ΦV [2] 45 30 53 45 16 220 mW 27 42 55 25 42 45 53 45 16 220 mW 44 55 42 40.5 48 40.5 14.5 198 mW 40 50 38 Radiation Pattern Batwing Lambertian Side Emitting Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 10% on flux and power measurements. 2. LUXEON types with even higher luminous flux levels will become available in the future. Please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative for more information. 3. Minimum flux value for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, the minimum luminous flux will vary over the Philips Lumileds' blue color range. Luminous flux will vary from a minimum of 6.3 lm at 460 nm to a typical of 20 lm at 480 nm due to this effect. Although the luminous power efficiency is lower in the short blue wavelength range, radiometric power efficiency increases as wavelength decreases. For more information, consult the LUXEON Design Guide, available upon request. 4. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. 5. In July 2003 Philips Lumileds announced a second generation white batwing product using a new phosphor deposition process resulting in improved color uniformity, LXHL BW02. LUXEON Emitter DS25 (5/07) 4 Optical Characteristics at 350mA, Junction Temperature, TJ = 25ºC Table 2. Radiation Pattern Color White Warm White Green Cyan Blue Royal Blue[2] Red Red Orange Amber White Green Cyan Blue Royal Blue[2] Red Red Orange Amber Dominant Wavelength [1] λD, Peak Wavelength [2] λP, or Color Temperature [3] CCT Min. Typ. Max. 4500K 2850K 520 nm 490 nm 460 nm 440 nm 620.5 nm 613.5 nm 584.5 nm 4500 K 520 nm 490 nm 460 nm 440 nm 620.5 nm 613.5 nm 584.5 nm 5500 K 3300K 530 nm 505 nm 470 nm 455 nm 625 nm 617 nm 590 nm 5500 K 530 nm 505 nm 470 nm 455 nm 627 nm 617 nm 590 nm 10000 K 3800K 550 nm 520 nm 490 nm 460 nm 645 nm 620.5nm 597 nm 10000 K 550 nm 520 nm 490 nm 460 nm 645 nm 620.5 nm 597 nm Spectral Half width[4] (nm) Δλ1/2 Temperature Coefficient of Dominant Wavelength (nm/oC) ΔλD/ ΔTJ Total Included Angle[5] (degrees) θ0.90V 110 110 110 110 110 110 110 110 110 160 160 160 160 160 160 160 160 Viewing Angle[6] (degrees) 2θ 1/2 110 110 110 110 110 110 110 110 110 140 140 140 140 140 140 140 140 Batwing 35 30 25 20 20 20 14 35 30 25 20 20 20 14 0.04 0.04 0.04 0.04 0.05 0.06 0.09 0.04 0.04 0.04 0.04 0.05 0.06 0.09 Lambertian Optical Characteristics at 350mA, Junction Temperature, TJ = 25ºC, Cont. Table 3. Radiation Pattern Color White Green Cyan Dominant Wavelength [1] λD, Peak Wavelength [2] λP, or Color Temperature [3] CCT Min. Typ. Max. 4500 K 520 nm 490 nm 460 nm [2] Spectral Half width[4] (nm) Δλ1/2 35 30 25 20 20 20 14 Temperature Coefficient of Dominant Wavelength (nm/oC) ΔλD/ ΔTJ 0.04 0.04 0.04 0.04 0.05 0.06 0.09 Typical Total Flux Percent within first 45°[7] Cum Φ45°