LXHL-FM5C

power light source Luxeon V Star Technical Data DS30 Luxeon is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. Features • Highest Flux per LED in the world – 4X the Flux of a comparable Luxeon and up to 50X the Flux of standard through hole LEDs • Extreme Luminous Density – 20X the lm/mm2 of a standard through hole LED TM Luxeon Power Light Sources give you total design freedom and unmatched brightness, creating a new world of light. • Very long operating life (up to 100k hours) • Available in Green, Blue, Royal Blue, and Cyan • Lambertian or Side Emitting Distribution Pattern The Luxeon V offers extreme luminous density, providing lumens per package of 4X a standard Luxeon or up to 50X that of alternative solid state light sources creating new opportunities for solid state lighting to displace conventional lighting technologies. • More Energy Efficient than Incandescent and most Halogen lamps • Low voltage DC operated • Cool beam, safe to the touch • Instant light (less than 100 ns) • Fully dimmable • No UV For high volume applications, custom Luxeon power light source designs are available upon request, to meet your specific needs. • Superior ESD protection Typical Applications • Portable (flashlight, bicycle) • Architectural Detail Lighting • Decorative • Fiber Optic Alternative • Medical Applications • Power Signaling / Airfield / Taxiway Lighting • Edge-Lit Signs (Exit, Point Of Sale) • LCD Backlights / Light Guides Emitters can be purchased in rsampl kits contains a strip of 50 taped emitters. To order a sample kit, add Luxeon V Star is available in green, blue, royal blue and cyan. Mechanical Dimensions Luxeon V Star Notes: 1. 2. Slots in aluminum-core PCB for M3 or #4 mounting screw. Electrical interconnection pads labeled on the aluminum-core PCB with “+” and “-“ to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. Electrical insulation between neighboring Stars is required – aluminum board is not electrically neutral. Drawings not to scale. All dimensions are in millimeters. 3. Side Emitting Lambertian Light Source 7.5 Light Source FR4 Board 7.5 FR4 Board Aluminum Board 1.5 4. 5. 1.5 Aluminum Board Notes: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 10% on flux and power measurements. Luxeon types with even higher luminous flux levels will become available in the future. Please consult your Lumileds Authorized Distributor or Lumileds sales representative for more information. Minimum flux value for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, the minimum luminous flux will vary over the Lumileds’ blue color range. Luminous flux will vary from a minimum of 18.1 lm at 460 nm to a typical of 80 lm at 480 nm due to this effect. Although the luminous power efficiency is lower in the short blue wavelength range, radiometric power efficiency increases as wavelength decreases. For more information, consult the Luxeon Design Guide, available upon request. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. Flux Characteristics at 700mA, Junction Temperature, TJ = 25oC Minimum Luminous Flux (lm) or Radiometric Power (mW) ΦV [1,2] 67.2 67.2 23.5 275 mW 67.2 67.2 23.5 275 mW Typical Luminous Flux (lm) Or Radiometric Power (mW) ΦV [2] 160 160 48 700 mW 145 145 43 630 mW Radiation Pattern Lambertian 2. 3. Color Green Cyan Blue[3] Royal Blue[4] Green Cyan Blue[3] Royal Blue[4] Part Number LXHL-LM5C LXHL-LE5C LXHL-LB5C LXHL-LR5C LXHL-FM5C LXHL-FE5C LXHL-FB5C LXHL-FR5C Side Emitting 4. Luxeon V Star 2 Document #: DS30 (09/20/04) Optical Characteristics at 700mA, Junction Temperature, TJ = 25oC Dominant Wavelength[1] λD or Peak Wavelength[2] λP Min. Typ. Max. 520 nm 490 nm 460 nm 440 nm 520 nm 490 nm 460 nm 440 nm 530 nm 505 nm 470 nm 455 nm 530 nm 505 nm 470 nm 455 nm 550 nm 520 nm 490 nm 460 nm 550 nm 520 nm 490 nm 460 nm Spectral Half-Width[3] (nm) ∆λ1/2 35 30 25 20 35 30 25 20 Temperature Coefficient of Dominant Wavelength (nm/oC) ∆λD/ ∆ΤJ 0.04 0.04 0.04 0.04 0.04 0.04 0.04 0.04 3. 4. 5. Notes: (for all three optical tables) 1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Lumileds maintains a tolerance of ± 0.5nm for dominant wavelength measurements. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. Spectral width at ½ of the peak intensity. Total angle at which 90% of total luminous flux is captured. θ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. Cumulative flux percent within ± 45° from optical axis. Off axis angle from lamp centerline where the luminous intensity reaches the peak value. On axis peak may be higher than off axis peak. All products built with Indium Gallium Nitride (InGaN). Blue and Royal Blue power light sources represented here are IEC825 Class 2 for eye safety. Radiation Pattern Lambertian Color Green Cyan Blue Royal Blue[2] Green Cyan Blue Royal Blue[2] 2. Side Emitting 6. Optical Characteristics at 700mA, Junction Temperature, TJ = 25oC, Continued Radiation pattern Lambertian Color Green Cyan Blue Royal Blue Total included angle[4] (degree) θ0.90V 150 150 150 150 viewing angle[5] (degree) 2θ 1/2 7. 8. 9. 150 150 150 150 Optical Characteristics at 700mA, Junction Temperature, TJ = 25oC, Continued Radiation Pattern Typical total flux percent within first 45°[6] Cum Φ45°