LXHL-PE02

power light source Luxeon V Emitter Technical Data DS34 LuxeonTM is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. Features • Highest Flux per LED in the world – 4X the Flux of a comparable Luxeon and up to 50X the Flux of standard through hole LEDs • Extreme Luminous Density – 20X the TM Luxeon Emitters give you total design freedom and unmatched brightness, creating a new world of light. lm/mm2 of a standard through hole LED • Very long operating life (up to100k hours) • Available in Green, Blue, Royal Blue and Cyan The Luxeon V offers extreme luminous density, providing lumens per package of 4X a Luxeon or up to 50X that of alternative solid state light sources creating new opportunities for solid state lighting to displace conventional lighting technologies. • Lambertian or Side Emitting radiation pattern • More Energy Efficient than Incandescent and most Halogen lamps • Low voltage DC operated • Cool beam, safe to the touch • Instant light (less than 100 ns) Luxeon V Emitters can be purchased in reels for high volume assembly. For high volume applications, custom Luxeon power light source designs are available upon request, to meet your specific needs. • Fully dimmable • No UV • Superior ESD protection Typical Applications • Portable (flashlight, bicycle) • Architectural Detail Lighting • Decorative • Fiber Optic Alternative M Emitters can be purchased i reels for high volume assembly. Sample kits are also • Medical Applications • Power Signaling / Airfield / Taxiway Lighting • Edge-Lit Signs (Exit, Point Of Sale) • LCD Backlights / Light Guides available for prototyping and design evaluation. A sample kits contains a strip of 50 taped Luxeon V Emitter is available in green, blue, royal blue and cyan. Mechanical Dimensions Lambertian Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required – slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. Drawings not to scale. All dimensions are in millimeters. All dimensions without tolerances are for reference only. 2. 3. 4. Side Emitting Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required – slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. Caution must be used in handling this device to avoid damage to the lens surfaces that will reduce optical efficiency. Drawings not to scale. All dimensions are in millimeters. All dimensions without tolerances are for reference only. 2. 3. 4. 5. Luxeon V Emitter 2 Document #: DS34 (09/19/04) Flux Characteristics at 700mA, Junction Temperature, TJ = 25oC Minimum Luminous Flux (lm) or Radiometric Power (mW) ΦV [1,2] 67.2 67.2 23.5 275 mW 67.2 67.2 23.5 275 mW Typical Luminous Flux (lm) or Radiometric Power (mW) ΦV [2] 160 160 48 700 mW 145 145 43 630 mW Notes: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Lumileds maintains a tolerance of ± 10% on flux and power measurements. Luxeon types with even higher luminous flux levels will become available in the future. Please consult your Lumileds Authorized Distributor or Lumileds sales representative for more information. Minimum flux value for 470 nm devices. Due to the CIE eye response curve in the short blue wavelength range, the minimum luminous flux will vary over the Lumileds’ blue color range. Luminous flux will vary from a minimum of 18.1 lm at 460 nm to a typical of 80 lm at 480 nm due to this effect. Although the luminous power efficiency is lower in the short blue wavelength range, radiometric power efficiency increases as wavelength decreases. For more information, consult the Luxeon Design Guide, available upon request. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. 2. Radiation Pattern Lambertian 3. Color Green Cyan Blue[3] Royal blue[4] Green Cyan Blue[3] Royal Blue[4] Luxeon V Emitter LXHL-PM02 LXHL-PE02 LXHL-PB02 LXHL-PR02 LXHL-DM02 LXHL-DE02 LXHL-DB02 LXHL-DR02 Side Emitting 4. Electrical Characteristics at 700mA, Junction Temperature, TJ = 25oC Notes: Temperature Color Forward Voltage VF (V)[1] Min. Typ. Max. Dynamic resistance[2] (Ω) RD coefficient of forward voltage[3] (mV/oC) ∆VF/ ∆TJ Thermal resistance, junction to case (oC/W) RθJ-C 1. Green Cyan Blue Royal Blue 5.43 5.43 5.43 5.43 6.84 6.84 6.84 6.84 8.31 8.31 8.31 8.31 1.0 1.0 1.0 1.0 -4.0 -4.0 -4.0 -4.0 8 8 8 8 2. 3. Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figure 3. Measured between 25oC ≤ TJ ≤ 110oC at IF = 700mA. Luxeon V Emitter 3 Document #: DS34 (09/19/04) Optical Characteristics at 700mA, Junction Temperature, TJ = 25oC temp Dominant Wavelength[1] λD or Peak Wavelength[2] λP Min. Typ. Max. 520 nm 490 nm 460 nm 440 nm 530 nm 505 nm 470 nm 455 nm 550 nm 520 nm 490 nm 460 nm Spectral coefficient Notes: (for both optical tables) 1. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Lumileds maintains a tolerance of ± 0.5nm for dominant wavelength measurements. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens and dominant wavelength. Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. Spectral width at ½ of the peak intensity. Total angle at which 90% of total luminous flux is captured. θ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. Cumulative flux percent within ± 45° from optical axis. Off axis angle from lamp centerline where the luminous intensity reaches peak off axis value. On axis peak may be higher than off axis peak. All products built with Indium Gallium Nitride (InGaN). Blue and Royal Blue power light sources represented here are IEC825 Class 2 for eye safety. Radiation Pattern Color Green Cyan Blue royal blue[2] Halfwidth[3] (nm) ∆λ1/2 35 30 25 20 of dominant (nm/oC) ∆λD/ ∆ΤJ 0.04 0.04 0.04 0.04 Total Included wavelength Angle[4] θ0.90V 150 150 150 150 Viewing Angle[5] (Degrees) 2. (degrees) 2θ 1/2 150 150 150 150 Lambertian 3. 4. 5. Optical Characteristics at 700mA, Junction Temperature, TJ = 25oC, Continued temp Dominant Wavelength λD or Peak Wavelength[2] λP Min. Typ. Max. [1] 6. 7. Spectral coefficient Radiation Pattern Color Halfwidth[3] (nm) ∆λ1/2 35 30 25 20 of dominant (nm/oC) ∆λD/ ∆ΤJ 0.04 0.04 0.04 0.04 wavelength Typical total flux percent within first 45°[6] Cum Φ45°