LXHL-PW03

Preliminary Technical Datasheet DS40 power light source LUXEON V Portable ® Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. The LUXEON V Portable, part of the LUXEON V family, delivers white luminous output 100 times brighter than standard small signal LEDs and 4X that of a standard LUXEON. LUXEON V Portable is designed for portable lighting products such as flashlights, "miner" head mounted lights, emergency egress lighting, and other battery operated applications. This device offers ruggedness, low power consumptions, and lifetimes greater than 50X conventional flashlight sources—over 500 hours compared to the typical 20 hour life for an incandescent bulb. ® Features Highest Flux LED in the world —50X traditional "5mm" LEDs, and 4X a standard LUXEON. 500+ hours operation compared to just 20 hours for typical incandescent flashlight bulbs. Extreme Luminous Density—20X the lm/mm2 of a standard through hole LED More Energy Efficient than Incandescent and most Halogen lamps Low voltage DC operated Cool beam, safe to the touch Instant light (less than 100 ns) Fully dimmable No UV Superior ESD protection Uniform angular color uniformity superior to other solid state sources, eliminating color halos within the light beam Benefits Compact low voltage light source for portable lighting applications Highly efficient source results in longer battery life Solid state technology eliminates fragile filament resulting in extremely rugged designs Much longer life than conven tional light bulbs enables sealed for life designs Table of Contents Mechanical Dimensions — Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Mechanical Dimensions — Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Part Number Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Flux Characteristics at 700mA, Junction Temperature, TJ = 25ºC . . . . . . . . . . . . . . . . . . . . .4 Electrical Characteristics at 700mA, Junction Temperature, TJ = 25ºC . . . . . . . . . . . . . . . . .5 Optical Characteristics at 700mA, Junction Temperature, TJ = 25ºC . . . . . . . . . . . . . . . . . . .5 Absolute Maximum Ratings Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Wavelength Characteristics, TJ = 25ºC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Forward Current Characteristics, TJ = 25ºC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Representative Typical Spatial Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 LUXEON V Portable Datasheet DS40 (8/06) 2 Mechanical Dimensions — Emitter Lambertian LXHL PW03 Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. Side Emitting LXHL DW03 Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. LUXEON V Portable Datasheet DS40 (8/06) 3 Mechanical Dimensions — Star Lambertian—LXHL LW6C and Side Emitting—LXHL FW6C Side Emitting Lambertian (High Dome) Notes: 1. Slots in aluminum core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum core PCB with "+" and " " to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Electrical insulation between neighboring Stars is required – aluminum board is not electrically neutral. 4. Drawings not to scale. 5. All dimensions are in millimeters. Part Number Matrix Table 1. Part Number LXHL PW03 LXHL LW6C LXHL DW03 LXHL FW6C Beam Pattern Lambertian Lambertian Side Emitting Side Emitting Configuration Emitter Star Emitter Star Drive Current 700 mA 700 mA 700 mA 700 mA Flux Characteristics at 700mA, Junction Temperature, TJ = 25ºC Table 2. LUXEON V LXHL PW03 LXHL LW6C LXHL DW03 LXHL FW6C Configuration Emitter Star Emitter Star Radiation Pattern Lambertian Lambertian Side Emitting Side Emitting Minimum Luminous Flux (lm) ΦV [1,2] Typical Luminous Flux (lm) ΦV [2] 87.4 87.4 87.4 87.4 120 120 105 105 Notes for Table 2: 1. Minimum luminous flux or performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 10% on flux measurements. 2. LUXEON types with even higher luminous flux levels will become available in the future. Please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative for more information. LUXEON V Portable Datasheet DS40 (8/06) 4 Electrical Characteristics at 700mA, Junction Temperature, TJ = 25ºC Table 3. Part Number LXHL PW03 LXHL DW03 LXHL LW6C LXHL FW6C Forward Voltage VF [1] (V) Min. Typ. Max. 5.43 5.43 5.43 5.43 6.84 6.84 6.84 6.84 8.31 8.31 8.31 8.31 Dynamic Resistance (Ω) RD 1.0 1.0 1.0 1.0 [2] Temperature Coefficient of Forward Voltage [3] (mV/ºC) ΔVF / ΔTJ 4.0 4.0 4.0 4.0 Thermal Resistance, Junction to Slug or Case (ºC/W) RθJ C 8 8 11 11 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figures 3. 3. Measured between 25°C ≤ TJ ≤ 110°C at IF = 700mA. Optical Characteristics at 700mA, Junction Temperature, TJ = 25ºC Table 4. Radiation Pattern Lambertian Side Emitting Color White White Min. 4500 K 4500 K Color Temperature CCT Typ. 5500 K 5500 K [1] Max. 10,000 K 10,000 K Notes for Table 4: 1. CRI (Color Rendering Index) for White product types is 70. Philips Lumileds maintains a ± 5% tester tolerance on CCT. 2. All products built with Indium Gallium Nitride (InGaN). Optical Characteristics at 700mA, Junction Temperature, TJ = 25ºC, Cont’d Table 5. Radiation Pattern Lambertian Color White Total Included Angle [1] (degree) θ0.90V 150 Viewing Angle (degree) 2θ 1/2 120 [2] Notes for Table 5: 1. Total angle at which 90% of total luminous flux is captured. 2. θ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. Optical Characteristics at 700mA, Junction Temperature, TJ = 25ºC, Cont’d Table 6. Radiation Pattern Side Emitting Color White Typical total flux percent within first 45º [1] Cum Φ45º