Illumination
LUXEON Rebel
Color Line
High flux and efficacy on industry’s most
widely used color LED platform
The LUXEON Rebel Color Line has leading light output, color stability,
flux density and clear saturated colors. These color LEDs are ideal for a
wide variety of lighting, signaling, signage and entertainment applications.
Every LUXEON Rebel Color emitter has built-in quality, reliability, lumen
maintenance and the ease of manufacturing needed to create a superior,
high quality light. LUXEON Rebel Color emitters give designers an endless
palette of colors to work with, adding interest, dimension and liveliness to
all lighting projects.
Features and Benefits
Primary Applications
Full color palette for a wider spectrum range
Architectural
Highest efficacy available for colors, allowing for lower power consumption
Lamps
High flux and leading hot and cold performance for saturated colors
Specialty Lighting
Fully developed ecosystem for LUXEON Rebel platforms
–– Emergency Lighting
–– Entertainment
DS68 LUXEON Rebel Color Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Dominant and Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON Rebel Color Line LEDs are tested and binned with a DC drive current and junction temperature specified below:
LUXEON Rebel Lime
–
350mA, Tj=85°C
LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue
–
700mA, Tj=25°C
All other colors
–
350mA, Tj=25°C
Part Number Nomenclature
Part numbers for LUXEON Rebel Color Line follow the convention below:
L X M L – P A 0 B – C C C C
L X M 2 – P A 0 B – C C C C
L X M 3 – P A 0 B – C C C C
L X M 5 – P A 0 B
Where:
A
–
designates color (X=Lime, M=Green, E=Cyan, B=Blue, R=Royal Blue, F=Far Red, D=Deep Red and Red,
H=Red-Orange, L=PC Amber and Amber, B=Blue, R=Royal Blue )
B
–
designates diode size (1=1mm2 and 2=2mm2)
C C C C
–
designates minimum luminous flux (lm) or radiometric power (mW) performance (see Product
Selection Guide)
Therefore, the following part number is used for a LUXEON Rebel Red, 1mm2 diode size, with a minimum luminous flux of 50:
L X M 2 – P D 0 1 – 0 0 5 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel
Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON Rebel Color Line at test conditions.
Color
DOMINANT [1, 2] or
PEAK WAVELENGTH [2] (nm)
LUMINIOUS FLUX [1, 3] (lm) or
RADIOMETRIC POWER [3] (mW)
Part Number
Minimum
Maximum
Minimum
Far Red
720
750
210
260
350
LXML-PF01
Deep Red
650
670
270
360
350
LXM3-PD01
620
645
60
62
350
LXM2-PD01-0060
620
645
50
53
350
LXM2-PD01-0050
620
645
40
48
350
LXM2-PD01-0040
620
645
50
52
350
LXML-PD01-0050
620
645
40
46
350
LXML-PD01-0040
620
645
30
38
350
LXML-PD01-0030
620
645
50
64
350
LXM5-PD01
610
620
70
72
350
LXM2-PH01-0070
610
620
60
67
350
LXM2-PH01-0060
610
620
60
62
350
LXML-PH01-0060
610
620
50
56
350
LXML-PH01-0050
610
620
50
90
350
LXM5-PH01
594
604
80
110
350
LXM2-PL01-0000
585
595
60
61
350
LXML-PL01-0060
585
595
50
54
350
LXML-PL01-0050
585
595
40
48
350
LXML-PL01-0040
585
595
30
38
350
LXML-PL01-0030
Red
Red-Orange
PC Amber
Amber
Lime
Green
Cyan
Blue
Royal Blue
Typical
Test Current
(mA)
585
595
50
74
350
LXM5-PL01
566
569
140
184
350
LXML-PX02-0000
520
540
100
102
350
LXML-PM01-0100
520
540
90
95
350
LXML-PM01-0090
520
540
80
88
350
LXML-PM01-0080
520
540
70
79
350
LXML-PM01-0070
490
515
80
83
350
LXML-PE01-0080
490
515
70
76
350
LXML-PE01-0070
490
515
60
67
350
LXML-PE01-0060
460
485
40
41
350
LXML-PB01-0040
460
485
30
35
350
LXML-PB01-0030
460
485
23
28
350
LXML-PB01-0023
460
485
18
22
350
LXML-PB01-0018
460
485
50
74
700
LXML-PB02
440
460
500
520
350
LXML-PR01-0500
440
460
1100
1120
700
LXML-PR02-1100
440
460
1050
1070
700
LXML-PR02-1050
440
460
1000
1030
700
LXML-PR02-1000
440
460
950
970
700
LXML-PR02-0950
440
460
900
940
700
LXML-PR02-0900
440
460
800
890
700
LXML-PR02-0800
440
460
900
1030
700
LXML-PR02-A900 [4]
Notes for Table 1:
1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength and ±6.5% on luminous flux measurements..
2. Far Red, Deep Red and Royal Blue are binned by peak wavelength and all other colors by dominant wavelength.
3. Far Red, Deep Red and Royal Blue are binned by radiometric power and all other colors by luminous flux.
4. LXML-PR02-A900 is a selection of color bins 4 and 5 only.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
3
Table 2. Optical characteristics for LUXEON Rebel Color Line at test conditions.
TYPICAL TEMPERATURE
COEFFICIENT OF DOMINANT
or PEAK WAVELENGTH
(nm/°C)
Typical Total
Included
Angle [2]
Typical
Viewing
Angle [3]
COLOR
Part Number
TYPICAL SPECTRAL
HALF-WIDTH [1]
(nm)
Far Red
LXML-PF01 [4]
30
0.17
145°
125°
Deep Red
LXM3-PD01 [4]
20
0.05
145°
125°
LXM2-PD01 [4, 6]
20
0.05
145°
125°
LXML-PD01
[4, 6]
20
0.05
145°
125°
LXM5-PD01 [4, 6]
20
0.05
145°
125°
LXM2-PH01 [4, 6]
20
0.08
145°
125°
LXML-PH01 [4, 6]
20
0.08
145°
125°
LXM5-PH01 [4, 6]
20
0.08
145°
125°
Red
Red-Orange
80
-0.01
140°
120°
LXML-PL01 [4, 6]
20
0.10
145°
125°
LXM5-PL01 [4, 6]
20
0.10
145°
125°
Lime
LXML-PX02 [5]
100
0.01
145°
125°
Green
LXML-PM01 [5]
30
0.05
145°
125°
Cyan
LXML-PE01 [5]
30
0.04
145°
125°
LXML-PB01 [5]
20
0.05
145°
125°
LXML-PB02 [5]
20
0.05
145°
125°
LXML-PR01
[5]
20
0.04
145°
125°
LXML-PR02 [5]
20
0.04
145°
125°
PC Amber
Amber
Blue
Royal Blue
LXM2-PL01
[5]
Notes for Table 2:
1. Spectral width at ½ of the peak intensity.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
4. Far Red, Deep Red, Red, Red-Orange and Amber products are built with aluminum indium gallium phosphide (AlInGaP).
5. PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN).
6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been defined to align with typical changes in spectral output at increased temperature.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON Rebel Color Line at test conditions.
COLOR
Part Number
Forward Voltage [1] (Vf)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
Typical Thermal
Resistance—Junction
to Solder Pad (°C/W)
Far Red
LXML-PF01
1.60
1.80
2.40
-2.0 to -4.0
5.50
Deep Red
LXM3-PD01
1.80
2.10
2.80
-2.0 to -4.0
8.00
LXM2-PD01
1.80
2.10
2.80
-2.0 to -4.0
8.00
Red
Red-Orange
PC Amber
LXML-PD01
2.31
2.90
3.51
-2.0 to -4.0
12.00
LXM5-PD01
1.80
2.10
2.60
-2.0 to -4.0
7.00
LXM2-PH01
1.80
2.10
2.80
-2.0 to -4.0
8.00
LXML-PH01
2.31
2.90
3.51
-2.0 to -4.0
12.00
LXM5-PH01
1.80
2.10
2.60
-2.0 to -4.0
7.00
LXM2-PL01
2.55
3.05
3.51
-2.0 to -4.0
10.00
LXML-PL01
2.31
2.90
3.51
-2.0 to -4.0
12.00
LXM5-PL01
1.80
2.10
2.60
-2.0 to -4.0
7.00
Lime
LXML-PX02
2.60
2.75
3.00
-2.0 to -4.0
6.00
Green
LXML-PM01
2.55
3.21
3.51
-2.0 to -4.0
10.00
Amber
Cyan
Blue
Royal Blue
LXML-PE01
2.55
3.17
3.51
-2.0 to -4.0
10.00
LXML-PB01
2.55
2.95
3.51
-2.0 to -4.0
10.00
LXML-PB02
2.50
2.95
3.50
-2.0 to -4.0
6.00
LXML-PR01
2.55
2.95
3.51
-2.0 to -4.0
10.00
LXML-PR02
2.50
2.90
3.50
-2.0 to -4.0
6.00
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4a. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=25°C.
Parameter
GREEN/CYAN/
BLUE/ROYAL BLUE
ES BLUE/
ES ROYAL BLUE
FAR RED/
DEEP RED/RED/
RED-ORANGE/AMBER
PC AMBER
1000mA
1000
700mA
700mA
1000mA
1200
700mA
700mA
150°C
150°C
135°C
130°C
DC Forward Current [1, 2]
Peak Pulsed Forward Current
[1, 3]
LED Junction Temperature [1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3A
Class 3A
Class 3A
Class 3A
Operating Case Temperature [1]
-40°C to 135°C
-40°C to 135°C
-40°C to 120°C
-40°C to 110°C
LED Storage Temperature
-40°C to 135°C
-40°C to 135°C
-40°C to 135°C
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
3
3
Autoclave Conditions
-121°C at 2 ATM
100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4a:
1. Proper current derating must be observed to maintain the junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
Table 4b. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=85°C.
Parameter
LIME
1000
DC Forward Current [1, 2]
Peak Pulsed Forward Current
1200
[1, 3]
LED Junction Temperature [1] (DC & Pulse)
150°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3A
Operating Case Temperature
-40°C to 135°C
[1]
LED Storage Temperature
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Autoclave Conditions
100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4b:
1. Proper current derating must be observed to maintain the junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
5
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LUXEON Rebel Far Red, Deep Red, Red, Red-Orange,
PC Amber, Amber, Green, Cyan, Blue and Royal Blue at test current, Tj=25°C.
Figure 1b. Typical normalized power vs. wavelength for LUXEON Rebel PC Amber and Lime at 350mA, test temperature.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
6
Light Output Characteristics
1.2
Relativ
ve Luminous/Radiant Flux
1.1
1.0
0.9
0.8
LUXEON Rebel ES Blue (LXML-PB02)
& Blue (LXML-PB01) Photometric
0.7
Green (LXML-PM01) & Cyan (LXMLPE01) Photometric
LUXEON Rebel ES Royal-Blue (LXMLPR02) & Royal-Blue (LXML-PR01)
Radiometric
0.6
0.5
-20
0
20
40
60
80
100
120
140
Thermal Pad Temperature (°C)
Figure 2a. Typical normalized light output vs. junction temperature for LXML-PM01,
LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test current.
1.75
Red (LXML-PD01 & LXM2-PD01)
Red-Orange (LXML-PH01 & LXM2-PH01)
Relative Luminous Flux Output
1.50
Amber (LXML-PL01)
PC Amber (LXM2-PL01)
Far Red (LXML-PF01)
1.25
Deep Red (LXM3-PD01
1.00
0.75
0.50
0.25
0.00
-20
0
20
40
60
80
100
Thermal Pad Temperature (°C)
Figure 2b. Typical normalized light output vs. junction temperature for LXML-PF01, LXM3-PD01,
LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01, LXM2-PL01, LXML-PL01 at test current.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
7
1.75
Relative Luminous Flux Output
1.50
Far Red (LXML-PF01)
1.25
1.00
0.75
0.50
0.25
0.00
0
20
40
60
80
100
120
140
Junction Temperature (°C)
Figure 2c. Typical normalized light output vs. junction temperature for LXML-PF01 at test current.
1.2
Red (LXM5-PD01)
Red Orange (LXM5-PH01)
1
Relative Luminous Flux
Amber (LXM5-PL01)
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
120
140
Junction Temperature (°C)
Figure 2d. Typical normalized light output vs. junction temperature for
LXM5-PD01, LXM5-PH01 and LXM5-PL01 at test current.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
8
1.2
Lime (LXML-PX02)
Relative Luminous Flux
1.1
1.0
0.9
0.8
0.7
25
50
75
100
125
150
Thermal Pad Temperature (°C)
Figure 2e. Typical normalized light output vs. junction temperature for LXML-PX02 at test current.
Forward Current Characteristics
1000
ES Royal Blue and ES Blue (LXMLPx02)
Forward Current (mA)
800
Green, Cyan, Blue and Royal Blue
(LXML-Px01)
600
Lime (LXML-PX02)
400
200
0
2.3
2.5
2.7
2.9
3.1
3.3
Forward Voltage (V)
Figure 3a. Typical forward current vs. forward voltage for LXML-PX02, LXML-Px01 and LXML-Px02 at test temperature.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
9
1000
Red (LXM5-PD01), Red-Orange (LXM5-PH01) & Amber (LXM5-PL01)
Red (LXML2-PD01) & Red Orange (LXM2-PH01)
900
Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01)
PC Amber (LXM2-PL01)
800
Far Red (LXML-PF01)
Forward Current (mA)
Deep Red (LXM3-PD01)
700
600
500
400
300
200
100
0
1.6
2.1
2.6
3.1
3.6
Forward Voltage (V)
Figure 3b. Typical forward current vs. forward voltage for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01,
LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM2-PL01, LXM5-PL01 and LXML-PL01 at test temperature.
2
1.8
Relative Radiant Flux
1.6
1.4
1.2
1
0.8
LUXEON Rebel ES Royal Blue (LXML-PR02)
and ES Blue (LXML-PB02)
0.6
04
0.4
0.2
0
0
200
400
600
800
1000
1200
1400
1600
Forward Current (mA)
Figure 3c. Relative luminous flux or radiometric power vs. forward current
for LXML-PB02 and LXML-PR02 at test temperature.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
10
2.7
2.4
Relative Luminous Flux
2.1
1.8
1.5
1.2
Blue (LXML-PB01)
0.9
Royal Blue (LXML-PR01)
0.6
Green (LXML-PM01)
Lime (LXML-PX02)
0.3
0.0
0
200
400
600
800
1000
Forward Current (mA)
Figure 3d. Relative luminous flux vs. forward current for LXML-PX02,
LXML-PM01, LXML-PB01 and LXML-PR01 at test temperature.
2.00
Normalized Luminous Flux
1.75
1.50
1.25
1.00
0.75
Red (LXM2-PD01) & Red-Orange (LXM2-PH01)
0.50
Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01)
Far Red (LXML-PF01)
0.25
Deep Red (LXM3-PD01)
0.00
0
100
200
300
400
500
600
700
800
Forward Current (mA)
Figure 3e. Normalized luminous flux or radiometric power vs. forward current for LXML-PF01, LXM3-PD01, LXM2-PD01,
LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test temperature.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
11
2.00
1.75
Relatiive Luminious Flux
1.50
1.25
1.00
0.75
0.50
PC Amber (LXM2-PL01)
0.25
0.00
0 00
0
100
200
300
400
500
600
700
Forward Current (mA)
Figure 3f. Relative luminous flux vs. forward current for LXM2-PL01 at test temperature.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
12
Radiation Pattern Characteristics
100%
90%
80%
Relative Inten
nsity %
70%
60%
50%
LUXEON Rebel ES Royal Blue (LXML-PR02)
and ES Blue (LXML-PB02)
40%
30%
green LXML-PM01, cyan LXML-PE01, blue
LXML-PB01 & royal blue LXML-PR01
20%
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement (deg)
Figure 4a. Typical radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01,
LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions.
0°
-30°
30°
60°
-60°
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
LUXEON Rebel ES Royal Blue LXML-PR02
and ES Blue LXML-PB02
green LXML-PM01, cyan LXML-PE01, blue
LXML-PB01 & royal blue LXML-PR01
Figure 5a. Typical polar radiation pattern for LXML-PM01, LXML-PE01,
LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
13
100%
90%
80%
Relative
R
Intensity %
70%
60%
50%
40%
30%
Red (LXM2-PD01, LXM5-PD01), Red-Orange
(LXM2-PH01, LXM5-PH01) & Amber (LXM5-PL01)
20%
red LXML-PD01, red-orange
LXML-PH01 & amber LXML-PL01
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement deg
Figure 4b. Typical radiation pattern for LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01,
LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test conditions.
0°
‐30°
30°
60°
‐60°
‐1.0
‐0.8
‐0.6
‐0.4
‐0.2
0.0
0.2
0.4
0.6
0.8
1.0
red LXM2‐PD01 & red‐orange LXM2‐PH01
red LXML‐PD01, red‐orange
LXML‐PH01 & amber LXML‐PL01
Figure 5b. Typical polar radiation pattern for LXM2-PD01, LXML-PD01,
LXM2-PH01, LXML-PH01 and LXML-PL01 at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
14
Far Red (LXML-PF01)
100%
90%
80%
Relative Intensity %
70%
60%
50%
40%
Far Red (LXML-PF01)
30%
20%
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement deg
Figure 4c. Typical radiation pattern for LXML-PF01 at test conditions.
0°
-30°
30°
60°
-60°
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
Far Red (LXML-PF01)
Figure 5c. Typical polar radiation pattern for LXML-PF01 at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
15
120%
Relative In
ntensity (%
%)
100%
80%
60%
40%
20%
Deep Red (LXM3-PD01)
0%
-90
-60
-30
0
30
60
90
Angular Displacement (deg)
Figure 4d. Typical radiation pattern for LXM3-PD01 at test conditions.
0°
100
30°
-30°
80
60
-60°
60
60°
60
40
20
-90°
90°
0
Deep Red (LXM3-PD01)
-120°
-150°
-150
120°
150°
150
180°
Figure 5d. Typical polar radiation pattern for LXM3-PD01 at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
16
1.2
1.0
Relative
lative Intensity
0.8
0.6
0.4
0.2
0.0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (degrees)
Figure 4e. Typical radiation pattern for LXM2-PL01 at test conditions.
Figure 5e. Typical polar radiation pattern for LXM2-PL01 at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
17
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
Reels of LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue are labeled
using a 3-digit alphanumeric CAT code following the format below:
A B C
Where:
A
–
designates luminous flux or radiometric power bin (example: Deep Red D=300 to 350 lumens,
Green K=70 to 80 lumens)
B
–
designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 2=495 to 500nm)
C
–
designates forward voltage bin (example: Far Red U=1.60 to 1.80V, Green B=2.55 to 2.79V)
Therefore, LUXEON Rebel Green with a lumen range of 70 to 80, a dominant wavelength of 525 to 530nm and a forward voltage
range of 2.55 to 2.79V has the following CAT code:
K 2 B
Reels of LUXEON Rebel Lime are labeled using a 4-digit alphanumeric CAT code following the format below:
A B C D
Where:
A
–
designates luminous flux bin (example: F=150 to 160 lumens, J=180 to 190 lumens, M=210 to 220 lumens)
B C –
designates color bin (example: A0)
D
designates forward voltage bin (example: P=2.60 to 2.75V, R=2.75 to 3.00V)
–
Therefore, LUXEON Rebel Lime with a lumen range of 180 to 190, color bin A0 and a forward voltage range of 2.75 to 3.00V has
the following CAT code:
J A 0 R
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
18
Luminous Flux Bins
Tables 5a and 5b list the standard luminous flux bins for LUXEON Rebel Color Line emitters. Although several bins are outlined,
product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5a. Luminous flux bin definitions for LUXEON Rebel Red, Red-Orange, PC Amber, Amber, Green, Cyan and Blue.
Bin
Luminous Flux [1] (lm)
Minimum
Maximum
D
18
24
E
24
30
F
30
40
G
40
50
H
50
60
J
60
70
K
70
80
L
80
90
M
90
100
N
100
110
X
110
120
P
120
130
Y
130
140
Q
140
160
R
160
180
S
180
200
Notes for Table 5a:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Tested and binned at test conditions.
Table 5b. Luminous flux bin definitions for LUXEON Rebel Lime.
Bin
Luminous Flux [1] (lm)
Minimum
Maximum
E
140
150
F
150
160
G
160
170
H
170
180
J
180
190
K
190
200
L
200
210
M
210
220
Notes for Table 5b:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Tested and binned at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
19
Radiometric Power Bins
Table 6a. Radiometric power bin definitions for LUXEON Rebel Royal Blue.
Bin
Radiometric Power [1] (mW)
Minimum
Maximum
D
350
425
E
425
500
F
500
600
G
600
700
H
700
800
J
800
900
K
900
950
Y
950
1000
A
1000
1050
B
1050
1100
M
1100
1200
N
1200
1300
P
1300
1400
Notes for Table 6a:
1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements.
2. Tested and binned at test conditions.
Table 6b. Radiometric power bin definitions for LUXEON Rebel Far Red and Deep Red.
Bin
Radiometric Power [1] (mW)
Minimum
Maximum
B
210
260
C
260
300
D
300
350
E
350
400
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements.
2. Tested and binned at test conditions.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
20
Dominant and Peak Wavelength Bins
Table 7a. Dominant wavelength bin definitions for LUXEON Rebel Red, Red-Orange, Amber, Green, Cyan and Blue.
dominant Wavelength [1] (nm)
COLOR
PART NUMBER
Bin
Red
LXM2-PD01, LXM5-PD01
and LXML-PD01
4
620
630
5
630
645
Red-Orange
LXM2-PH01, LXM5-PH01
and LXML-PH01
2
610
620
1
585
587
2
587
590
4
590
592
6
592
595
1
520
525
2
525
530
3
530
535
Amber
Green
Cyan
Blue
LXM5-PL01
and LXML-PL01
LXML-PM01
LXML-PE01
LXML-PB01
and LXML-PB02
Minimum
Maximum
4
535
540
1
490
495
2
495
500
3
500
505
4
505
510
5
510
515
1
460
465
2
465
470
3
470
475
4
475
480
5
480
485
Notes for Table 7a:
1. Lumileds maintains a tolerane of ±0.5nm for dominant wavelength measurements.
Table 7b. Peak wavelength bin definitions for LUXEON Rebel Far Red, Deep Red and Royal Blue.
COLOR
Far Red
Deep Red
Royal Blue
PART NUMBER
LXML-PF01
LXM3-PD01
LXML-PR01
and
LXML-PR02
Bin
PEAK Wavelength [1] (nm)
Minimum
Maximum
1
720
730
2
730
740
3
740
750
6
650
660
7
660
670
3
440
445
4
445
450
5
450
455
6
455
460
Notes for Table 7b:
1. Lumileds maintains a tolerane of ±2nm for peak wavelength measurements.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
21
Color Bin Definitions
0.6
ES Lime
0.55
y
PC Amber
0.5
0.45
0.4
0.36
0.41
0.46
0.51
0.56
0.61
x
Figure 6. Color bin structure for LUXEON Rebel PC Amber and Lime for Table 8.
Table 8. Peak wavelength bin definitions for LUXEON Rebel PC Amber and Lime.
COLOR
PC Amber
Lime
PART NUMBER
LXM2-PL01
LXML-PX02
BIN
2
A0
x
y
0.5622
0.4372
0.5576
0.4326
0.5775
0.4132
0.5843
0.4151
0.3819
0.5055
0.4191
0.5790
0.4327
0.5655
0.3972
0.4986
Notes for Table 8:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
22
Forward Voltage Bins
Table 9. Forward voltage bin definitions for LUXEON Rebel Color Line at test conditions.
PART NUMBER
Bin
U
Far Red - LXML-PF01
Deep Red - LXM3-PD01
Red - LXM2-PD01
Red - LXM5-PD01
Red-Orange - LXM2-PH01
Red-Orange - LXM5-PH01
Amber - LXM5-PL01
Lime - LXML-PX02
Red - LXML-PD01
Red-Orange - LXML-PH01
PC Amber - LXM2-PL01
Amber - LXML-PL01
Green - LXML-PM01
Cyan - LXML-PE01
Blue - LXML-PB01
Royal Blue - LXML-PR01
ES Blue - LXML-PB02
ES Royal Blue - LXML-PR02
FORWARD VOLTAGE [1] (Vf)
Minimum
Maximum
1.60
1.80
V
1.80
2.00
W
2.00
2.20
X
2.20
2.40
Y
2.40
2.60
Z
2.60
2.80
P
2.60
2.75
R
2.75
3.00
A
2.31
2.55
B
2.55
2.79
C
2.79
3.03
D
3.03
3.27
E
3.27
3.51
P
2.50
2.75
R
2.75
3.00
S
3.00
3.25
T
3.25
3.50
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
23
Mechanical Dimensions
3.17
2.93
2.10
1.85
1.67
1.38
0.11
0.05
4.61
4.37
0.68
0.52
1.67
1.38
2.61
2.49
R 0.14
0.06
1.26
1.14
0.46
0.34
0.73
0.61
1.86
1.74
1.83
1.71
2.86
2.74
Figure 7a. Mechanical dimensions for LUXEON Rebel Color Line.
Notes for Figure 7a:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
24
2.10
1.85
3.17
2.93
0.11
0.05
1.67
1.38
2.31
2.25
1.67
1.38
0.86
0.74
0.83
0.54
0.84
0.72
∅
0.68
0.52
0.88
0.72
0.14
R 0.06
2.61
2.49
0.21
R 0.09
1.26
1.14
4.61
4.37
0.14
R 0.06
0.46
0.34
0.73
0.61
1.86
1.74
1.83
1.71
2.86
2.74
Figure 7b. Mechanical dimensions for LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue.
Notes for Figure 7b:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
25
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 8. Visualization of the acceptable reflow temperature profile as specified in Table 10.
Table 10. Reflow profile characteristics for LUXEON Rebel Color Line.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 180 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 11. Moisture sensitivity levels for LUXEON Rebel Color Line.
level
1
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
26
Solder Pad Design
3
1
3
2
TOP
2
1
BOTTOM
PAD
FUNCTION
1
CATHODE
2
ANODE
3
THERMAL
Figure 9a. LUXEON Rebel Color Line pad configuration.
Notes for Figure 9a:
1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
2. Drawings are not to scale.
Figure 9b. LUXEON Rebel Color Line solder pad design.
Notes for Figure 9b:
3. The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W.
4. Drawings are not to scale.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
27
Packaging Information
Pocket Tape Dimensions
20
1000
50
Figure 10. Pocket tape dimensions for LUXEON Rebel Color Line.
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
28
Reel Dimensions
Figure 11. Reel dimensions for LUXEON Rebel Color Line.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS68 LUXEON Rebel Color Line Product Datasheet 20171106 ©2017 Lumileds Holding B.V. All rights reserved.
29
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS68 LUXEON Rebel Color Line
Product Datasheet 20171106
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Lumileds:
LXM3-PD01 LXML-PR02-A900 LXML-PL01-0040 LXML-PE01-0060 LXML-PE01-0080 LXML-PB01-0030 LXMLPB01-0040 LXML-PB02 LXML-PR01-0500 LXML-PM01-0090 LXML-PM01-0100 LXML-PE01-0070 LXM2-PD010040 LXM2-PD01-0050 LXM2-PH01-0060 LXM2-PH01-0070 LXML-PL01-0050 LXML-PL01-0060 LXML-PX02-0000
LXML-PR01-0275 LXML-PR01-0425 LXM2-PL01-0000 LXML-PH01-0050 LXM5-PD01 LXM5-PH01 LXM5-PL01
LXML-PF01 LXML-PM01-0080 LXM2-PD01-0060 LXML-PD01-0040 LXML-PD01-0050 LXML-PH01-0060
工商网监
湘ICP备2023018690号
