LXML-PD01-0030

Technical Datasheet DS56 power light source LUXEON Rebel ® Introduction LUXEON® Rebel is an ultra compact, surface mount, high power LED that delivers elevated standards for light output, flux density and manufacturability. Offering industry leading flux density, lumens per package and power handling capabilities, LUXEON Rebel enables you to create never before possible lighting applications and: deliver more useable light and higher flux density optimize applications to reduce size and cost tightly pack the LEDs for color mixing applications engineer more robust applications utilize standard FR4 PCB technology simplify manufacturing through the use of surface mount technology. 150°C Junction Temperature Industry leading lumen perform ance, > 100 lumens in cool white at 350mA 350mA — 1000mA drive current High efficacy, flux density and lumens per package Industry best moisture sensitivity level—JEDEC Level 1 unlimited floor life no need for reconditioning Lead free reflow solder JEDEC 020c compatible RoHS Compliant Autoclave compliant— JESD22 A 102 Industry best lumen maintenance—50,000 hours life at 700 mA with 70% lumen maintenance Electrically isolated thermal pad Available in all colors. LUXEON Rebel Technology Leadership Table of Contents Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Visual Appearance of LUXEON Rebel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Flux Characteristics for LUXEON Rebel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Typical Light Output Characteristics over Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Typical Relative Luminous Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Cool White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Neutral White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Warm White Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Color Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 LUXEON Rebel Datasheet DS56 (7/07) 2 Product Nomenclature LUXEON Rebel is tested and binned at 350mA. The part number designation is explained as follows: LXML ABCD EFGH Where: A — designates radiation pattern (value P for Lambertian) B — designates color (see LUXEON Rebel Binning and Labelling section) C — designates color variant (0 for direct colored variants, C for Cool White, N for Neutral White and W for Warm White) D — designates test current (value 1 for 350 mA) E — reserved for future product offerings FGH — minimum luminous flux (lm) or radiometric power (mW) performance Therefore products tested and binned at 350 mA follow the part numbering scheme: LXML Pxx1 xxxx Average Lumen Maintenance Characteristics Lifetime for solid state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that cool white, neutral white, warm white, green, cyan, blue and royal blue LUXEON Rebel products will deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Philips Lumileds projects that red, red orange and amber LUXEON Rebel products will deliver, on average, 70% lumen mainte nance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA. This projection is based on constant current operation with junction temperature maintained at or below 110°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid state lighting market. LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). Visual Appearance of LUXEON Rebel All lighted LUXEON Rebel product will provide comparable Lambertian beam performance, suitable for use with commercially available optical systems. Without power, LED die within different reels may appear visually different. Please contact your Philips Lumileds or Future Electronics respresentative for further information. LUXEON Rebel Datasheet DS56 (7/07) 3 Flux Characteristics for LUXEON Rebel—Thermal Pad Temperature = 25°C Table 1. Performance at Test Current Minimum Luminous Flux (lm) or Radiometric Power (mW) ΦV [1] [3] 40 50 70 80 90 100 Typical Performance at Indicated Current Typical Luminous Flux (lm) or Radiometric Power (mW) ΦV [2] [3] 80 95 130 145 160 180 Color Part Number LXML LXML LXML LXML LXML LXML PWC1 PWC1 PWC1 PWC1 PWC1 PWC1 0040 0050 0070 0080 0090 0100 Test Current (mA) 350 350 350 350 350 350 Drive Current (mA) 700 700 700 700 700 700 Cool White Neutral White LXML LXML LXML LXML PWN1 PWN1 PWN1 PWN1 0040 0050 0070 0080 40 50 70 80 40 50 60 40 50 70 80 30 40 60 70 8.2 10.7 13.9 18.1 23.5 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 80 95 130 145 80 95 110 80 95 130 145 65 80 110 130 19 22 27 38 48 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 Warm White LXML PWW1 0040 LXML PWW1 0050 LXML PWW1 0060 LXML LXML LXML LXML LXML LXML LXML LXML LXML LXML LXML LXML LXML PM01 PM01 PM01 PM01 PE01 PE01 PE01 PE01 PB01 PB01 PB01 PB01 PB01 0040 0050 0070 0080 0030 0040 0060 0070 0008 0010 0013 0018 0023 Green Cyan Blue Royal Blue LXML PR01 0175 LXML PR01 0225 LXML PR01 0275 175 mW 225 mW 275 mW 350 350 350 325 mW 400 mW 525 mW 700 700 700 Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information. LUXEON Rebel Datasheet DS56 (7/07) 4 Flux Characteristics for LUXEON Rebel Continued Thermal Pad Temperature = 25°C Table 1. Continued Performance at Test Current Minimum Luminous Flux (lm) ΦV [1] [3] 30 40 Typical Performance at Indicated Current Test Current (mA) 350 350 Color Red Part Number LXML PD01 0030 LXML PD01 0040 Typical Luminous Flux (lm) ΦV [2] [3] 65 85 Drive Current (mA) 700 700 Red Orange LXML PH01 0040 LXML PH01 0050 40 50 350 350 85 100 700 700 Amber LXML PL01 0023 LXML PL01 0030 23.5 30.0 350 350 50 65 700 700 Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux performance is when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information. LUXEON Rebel Datasheet DS56 (7/07) 5 Optical Characteristics Lambertian LUXEON Rebel at Test Current[1] Thermal Pad Temperature = 25°C Table 2. Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue Red Red Orange Amber Notes for Table 2: 1. 2. [3] Dominant Wavelength [2] λD, Peak Wavelength [3] λP, or Color Temperature [4] CCT Min. Typ. Max. 4500 K 3500 K 2670 K 520 nm 490 nm 460 nm 440 nm 620.5 nm 613.5 nm 584.5 nm 6500 K 4100 K 3100 K 530 nm 505 nm 470 nm 455 nm 627 nm 617 nm 590 nm 10,000 K 4500 K 3500 K 550 nm 520 nm 490 nm 460 nm 645 nm 620.5 nm 597 nm Typical Spectral Half width (nm) Δλ1/2 N/A N/A N/A 30 30 33 24 29 28 28 [6] Typical Temperature Coefficient of Dominant Wavelength (nm/oC) ΔλD/ ΔTJ N/A N/A N/A 0.05 0.04 0.05 0.04 0.05 0.08 0.10 Typical Total Included Angle [7] (degrees) θ0.90V 160 160 160 160 160 160 160 160 160 160 Typical Viewing Angle [8] (degrees) 2θ 1/2 140 140 140 140 140 140 140 140 140 140 Test current is 350 mA for all LXML Pxx1 0xxx products. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. Royal Blue product is binned by radiometric power and peak wavelength rather than photometric lumens. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 4. CCT ±5% tester tolerance. 5. Typical CRI (Color Rendering Index) for Cool White is 70, Neutral White is 75 and Warm White is 80. 6. Spectral width at ½ of the peak intensity. 7. Total angle at which 90% of total luminous flux is captured. 8. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 9. All white, green, cyan, blue and royal blue products are built with Indium Gallium Nitride (InGaN). 10. All red, red orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP). 11. Cool White, Neutral White, Warm White, Blue and Royal Blue power light sources represented here are IEC825 class 2 for eye safety. LUXEON Rebel Datasheet DS56 (7/07) 6 Electrical Characteristics Electrical Characteristics at 350mA for LUXEON Rebel, Part Numbers LXML Pxx1 0xxx, Thermal Pad Temperature = 25ºC Table 3. Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue Red Red Orange Amber Forward Voltage Vf [1] (V) Min. Typ. Max. 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.31 2.31 2.31 3.15 3.15 3.15 3.15 3.15 3.15 3.15 2.9 2.9 2.9 3.99 3.99 3.99 3.99 3.99 3.99 3.99 3.51 3.51 3.51 Typical Dynamic Resistance (Ω) RD 0.3 0.3 0.3 0.3 0.3 0.2 0.2 1.65 1.5 1.3 [2] Typical Temperature Coefficient of Forward Voltage [3] (mV/oC) ΔVF / ΔTJ 3.0 3.0 3.0 6.0 3.0 3.0 5.0 3.5 3.0 2.5 Typical Thermal Resistance Junction to Thermal Pad (oC/W) RθJ C 10 10 10 10 10 10 10 12 12 12 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = TJ = 110°C at If = 350 mA. Typical Electrical Characteristics at 700mA for LUXEON Rebel, Part Numbers LXML Pxx1 0xxx, Thermal Pad Temperature = 25ºC Table 4. Color Cool White Neutral White Warm White Green Cyan Blue Royal Blue Red Red Orange Amber Typical Forward Voltage Vf (V) 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.60 3.60 3.60 Notes for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = TJ = 110°C at If = 700 mA. LUXEON Rebel Datasheet DS56 (7/07) 7 Absolute Maximum Ratings Table 5. Parameter DC Forward Current (mA) Peak Pulsed Forward Current (mA) Average Forward Current (mA) ESD Sensitivity Cool White / Neutral White / Warm White / Green / Cyan / Blue / Royal Blue 1000 1000 1000 < 8000V Human Body Model (HBM) Class 2 JESD22 A114 B < 400V Machine Model (MM) Class 2 JESD22 A115 B 150°C 40°C 135°C 40°C 135°C JEDEC 020c 260°C 3 Red / Red Orange / Amber 700 700 700 < 8000V Human Body Model (HBM) Class 2 JESD22 A114 B < 400V Machine Model (MM) Class 2 JESD22 A115 B 135°C 40°C 120°C 40°C 135°C JEDEC 020c 260°C 3 LED Junction Temperature[1] Operating Case Temperature at 350mA Storage Temperature Soldering Temperature Allowable Reflow Cycles Autoclave Conditions Reverse Voltage (Vr) 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum See Note 2 See Note 2 Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. JEDEC Moisture Sensitivity Table 6. Soak Requirements Level Floor Life Time (hours) 168 + 5/ 0 Standard Conditions 85°C / 85% RH Time 1 unlimited Conditions ≤ 30°C / 85% RH LUXEON Rebel Datasheet DS56 (7/07) 8 Reflow Soldering Characteristics JEDEC 020c Table 7. Profile Feature Average Ramp Up Rate (Tsmax to Tp) Preheat Temperature Min (Tsmin) Preheat Temperature Max (Tsmax) Preheat Time (tsmin to tsmax) Time Maintained Above Temperature (TL) Time Maintained Above Time (tL) Peak / Classification Temperature (TP) Time Within 5°C of Actual Peak Temperature (tP) Ramp Down Rate Time 25°C to Peak Temperature Lead Free Assembly 3°C / second max 150°C 200°C 60 180 seconds 217°C 60 150 seconds 260°C 20 40 seconds 6°C / second max 8 minutes max Notes for Table 7: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON Rebel Datasheet DS56 (7/07) 9 Mechanical Dimensions Figure 1. Package Outline Drawing. Notes for Figure 1: 1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. LUXEON Rebel Datasheet DS56 (7/07) 10 Pad Configuration Figure 2. Pad Configuration. Note for Figure 2: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. Solder Pad Design Note for Figure 3: The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W. Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available upon request. Figure 3. Solder Pad Layout. LUXEON Rebel Datasheet DS56 (7/07) 11 Wavelength Characteristics Green, Cyan, Blue, Royal Blue, Red, Red Orange and Amber at Test Current Thermal Pad Temperature, TJ = 25°C Figure 4. Relative intensity vs. wavelength. Cool White at Test Current Thermal Pad Temperature = 25°C 1.0 Relative Spectral Power Distribution 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5a. Cool White color spectrum of typical CCT part, integrated measurement. LUXEON Rebel Datasheet DS56 (7/07) 12 Neutral White at Test Current Thermal Pad Temperature = 25°C Spectral Power Distribution 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5b. Neutral White color spectrum of typical CCT part, integrated measurement. Warm White at Test Current Thermal Pad Temperature = 25°C Spectral Power Distribution 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5c. Warm White color spectrum of typical CCT part, integrated measurement. LUXEON Rebel Datasheet DS56 (7/07) 13 Typical Light Output Characteristics over Temperature Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue at Test Current. 1.2 1.1 Relative Luminous Flux lm / mW 1.0 0.9 0.8 White Photometric Blue Photometric 0.7 Green Photometric Cyan Photometric 0.6 Royal-Blue Radiometric 0.5 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature °C Figure 6. Relative light output vs. Thermal Pad temperature for White, Green, Cyan, Blue and Royal Blue. Red, Red Orange and Amber at Test Current 1.75 1.50 Red Photometric Red-Orange Photometric Relative Luminous Flux Output 1.25 Amber Photometric 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature °C Figure 7. Relative light output vs. Thermal Pad temperature for Red, Red Orange and Amber. LUXEON Rebel Datasheet DS56 (7/07) 14 Typical Forward Current Characteristics Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue, Thermal Pad Temperature = 25°C 1200 1000 Forward Current mA 800 600 400 200 0 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 Forward Voltage V Figure 8. Forward current vs. forward voltage for White, Green, Cyan, Blue and Royal Blue. Red, Red Orange and Amber, Thermal Pad Temperature = 25°C 800 700 600 Forward Current mA 500 400 300 200 100 0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage V Figure 9. Forward current vs. forward voltage for red, red orange and amber. LUXEON Rebel Datasheet DS56 (7/07) 15 Typical Relative Luminous Flux Typical Relative Luminous Flux vs. Forward Current for Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue, Thermal Pad Temperature = 25°C 2.50 2.25 2.00 1.75 Normalized Luminous Flux 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 200 400 600 800 1000 1200 Forward Current mA Figure 10. Relative luminous flux or radiometric power vs. forward current for white, green, cyan, blue and royal blue at Thermal Pad = 25ºC maintained, test current 350 mA. Typical Relative Luminous Flux vs. Forward Current for Red, Red Orange, Amber, Thermal Pad Temperature = 25°C 2.00 1.75 Normalized Luminous Flux lm 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 100 200 300 400 500 600 700 800 Forward Current mA Figure 11. Relative luminous flux vs. forward current for red, red orange and amber at Thermal Pad = 25ºC maintained, test current 350 mA. LUXEON Rebel Datasheet DS56 (7/07) 16 Current Derating Curves Current Derating Curve for 350 mA drive current Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue 400 350 IF - Forward Current mA 300 250 200 150 100 35º C/W 15º C/W 25º C/W 50 0 0 45º C/W 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 12: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. Current Derating Curve for 350 mA drive current Red, Red Orange, Amber 400 350 IF - Forward Current mA 300 250 200 150 100 50 45º C/W 15º C/W 25º C/W 35º C/W 0 0 25 50 75 100 125 150 TA - Ambient Temperature °C Figure 13: Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC. LUXEON Rebel Datasheet DS56 (7/07) 17 Current Derating Curve for 700 mA drive current Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue 800 700 IF - Forward Current mA 600 500 400 300 15º C/W 200 100 0 0 25º C/W 35º C/W 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 14: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. Current Derating Curve for 700 mA drive current Red, Red Orange, Amber 800 700 IF - Forward Current mA 600 500 400 300 15º C/W 200 100 0 0 25º C/W 35º C/W 25 50 75 100 125 150 TA - Ambient Temperature °C Figure 15: Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC. LUXEON Rebel Datasheet DS56 (7/07) 18 Current Derating Curve for 1000mA drive current Cool White, Neutral White, Warm White, Green, Cyan, Blue and Royal Blue 1200 1000 IF - Forward Current mA 800 600 15°C/W 400 25°C/W 200 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 16: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. LUXEON Rebel Datasheet DS56 (7/07) 19 Typical Radiation Patterns Typical Representative Spatial Radiation Pattern for Cool White, Neutral White and Warm White Lambertian 100% 90% 80% 70% Relative Intensity % 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 17: Typical Representative Spatial Radiation Pattern for Cool White, Neutral White and Warm White Lambertian. Typical Polar Radiation Pattern for White Lambertian 0º - 30º 30º - 60º 60º - 90º 0 20% 40% 60% 80% 90º 100% Figure 18: Typical Polar Radiation Pattern for Cool White, Neutral White and Warm White Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 20 Typical Representative Spatial Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian 1.2 1.0 Relative Intensity % 0.8 0.6 0.4 Typical Upper Bound 0.2 Typical Lower Bound 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Angular Displacement deg Figure 19: Typical Representative Spatial Radiation Pattern for Green and Royal Blue Lambertian. Typical Polar Radiation Pattern for Green, Cyan, Blue and Royal Blue Lambertian 0° 30° 330° 60° 300° 90° 1 1 1 1 0 0 0 0 0 1 1 1 1 270° Figure 20: Typical Polar Radiation Pattern for Green and Royal Blue Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 21 Typical Representative Spatial Radiation Pattern for Red, Red Orange and Amber Lambertian 100% 90% 80% 70% Relative Intensity % 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 21: Typical Representative Spatial Radiation Pattern for Red, Red Orange and Amber Lambertian. Typical Polar Radiation Pattern for Red, Red Orange and Amber Lambertian 0° -30° 30° -60° 60° -90° -120% -100% -80% -60% -40% -20% 0% 20% 40% 60% 80% 100% 90° 120% Figure 22: Typical Polar Radiation Pattern for Red, Red Orange and Amber Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 22 Emitter Pocket Tape Packaging LUXEON Rebel Datasheet DS56 (7/07) 23 Emitter Reel Packaging LUXEON Rebel Datasheet DS56 (7/07) 24 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the tech nical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (VF). Decoding Product Bin Labeling LUXEON Rebel Emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emit ters packaged on a single reel. All emitters packaged within a reel are of the same 3 variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of Green, Cyan, Blue, Royal Blue, Red, Red Orange and Amber Emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (J, H, J, K etc.) B = Color bin (2, 4, 6 etc.) C = VF bin (D, E, F, G etc.) Reels of Cool White, Neutral White and Warm White Emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (J, H, J, K etc.) B and C = Color bin (W0, U0, V0 etc.) C = VF bin (D, E, F, G etc.) LUXEON Rebel Datasheet DS56 (7/07) 25 Luminous Flux Bins Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 8. Flux Bins All Colors (except Royal Blue) Bin Code A B C D E F G H J K L M N P Q R S T U V W X Minimum Photometric Flux (lm) 8.2 10.7 13.9 18.1 23.5 30 40 50 60 70 80 90 100 120 140 160 180 200 220 240 260 280 Maximum Photometric Flux (lm) 10.7 13.9 18.1 23.5 30 40 50 60 70 80 90 100 120 140 160 180 200 220 240 260 280 300 LUXEON Rebel Datasheet DS56 (7/07) 26 Table 9. Flux Bins Royal Blue Only (tested and binned at 350mA) Bin Code A B C D E F G H J K Minimum Radiometric Flux (mW) 175 225 275 350 425 500 600 700 800 900 Maximum Radiometric Flux (mW) 225 275 350 425 500 600 700 800 900 1000 Cool White Bin Structure Figure 23: Cool White Bin Structure. LUXEON Rebel Datasheet DS56 (7/07) 27 Cool White Bin Coordinates Cool White LUXEON Rebel Emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 10,000K to 4,500K Table 10. Cool White Bin Coordinates Typical CCT (K) 8000 Typical CCT (K) 6000 Bin Code Y0 X 0.274238 0.303051 0.307553 0.282968 0.282968 0.307553 0.311163 0.289922 0.301093 0.313617 0.314792 0.303051 0.303051 0.314792 0.316042 0.305170 0.305170 0.316042 0.317466 0.307553 0.307553 0.317466 0.319597 0.311163 0.313617 0.328636 0.328823 0.314792 0.314792 0.328823 0.329006 0.316042 0.316042 0.329006 0.329220 0.317466 0.317466 0.329220 0.329393 0.318606 Y 0.300667 0.332708 0.310778 0.283772 0.283772 0.310778 0.293192 0.270316 0.342244 0.354992 0.344438 0.332708 0.332708 0.344438 0.333222 0.322386 0.322386 0.333222 0.320438 0.310778 0.310778 0.320438 0.301303 0.293192 0.354992 0.368952 0.356917 0.344438 0.344438 0.356917 0.345092 0.333222 0.333222 0.345092 0.331331 0.320438 0.320438 0.331331 0.320211 0.310201 Bin Code WQ X 0.318606 0.329393 0.329544 0.319597 0.328636 0.348147 0.346904 0.328823 0.328823 0.346904 0.345781 0.329006 0.329006 0.345781 0.344443 0.329220 0.329220 0.344443 0.343352 0.329393 0.348147 0.367294 0.364212 0.346904 0.346904 0.364212 0.362219 0.345781 0.345781 0.362219 0.359401 0.344443 0.344443 0.359401 0.357079 0.343352 Y 0.310201 0.320211 0.310495 0.301303 0.368952 0.385629 0.371742 0.356917 0.356917 0.371742 0.359190 0.345092 0.345092 0.359190 0.344232 0.331331 0.331331 0.344232 0.332034 0.320211 0.385629 0.400290 0.382878 0.371742 0.371742 0.382878 0.371616 0.359190 0.359190 0.371616 0.355699 0.344232 0.344232 0.355699 0.342581 0.332034 YA 8000 VM 5300 XM 6700 VN 5300 XN 6700 V0 5300 X0 6700 VP 5300 XP 6700 UM 4750 WM 6000 UN 4750 WN 6000 U0 4750 W0 6000 UP 4750 WP 6000 Note for Table 10: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 28 Neutral White Bin Structure Figure 24: Neutral White Bin Structure. Neutral White LUXEON Rebel Emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 4,500K to 3,500K Table 11. Neutral White Bin Coordinates Bin Code TM X 0.367294 0.385953 0.381106 0.364212 0.364212 0.381106 0.378264 0.362219 0.362219 0.378264 0.374075 0.359401 0.359401 0.374075 0.370582 0.357079 0.385953 0.402270 0.396279 0.381106 0.381106 0.396279 0.392368 0.378264 Y 0.400290 0.412995 0.393747 0.382878 0.382878 0.393747 0.382458 0.371616 0.371616 0.382458 0.365822 0.355699 0.355699 0.365822 0.351953 0.342581 0.412995 0.422776 0.403508 0.393747 0.393747 0.403508 0.390932 0.382458 Typical CCT (K) 4300 Bin Code S0 X 0.378264 0.392368 0.387071 0.374075 0.374075 0.387071 0.382598 0.370582 0.402270 0.420940 0.414776 0.396279 0.396279 0.414776 0.408593 0.392368 0.392368 0.408593 0.402113 0.387071 0.387071 0.402113 0.396564 0.382598 Y 0.382458 0.390932 0.373899 0.365822 0.365822 0.373899 0.359515 0.351953 0.422776 0.432618 0.416097 0.403508 0.403508 0.416097 0.399525 0.390932 0.390932 0.399525 0.382156 0.373899 0.373899 0.382156 0.367284 0.359515 Typical CCT (K) 3950 TN 4300 SP 3950 T0 4300 RM 3650 TP 4300 RN 3650 SM 3950 R0 3650 SN 3950 RP 3650 Note for Table 11: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. 29 LUXEON Rebel Datasheet DS56 (7/07) Warm White Bin Structure Figure 25: Warm White Bin Structure. Warm White LUXEON Rebel Emitters are tested and binned by x,y coordinates. 16 Color Bins, CCT Range 3,500K to 2,670K Table 12. Warm White Bin Coordinates Bin Code QM X 0.420940 0.438458 0.431186 0.414776 0.414776 0.431186 0.423956 0.408593 0.408593 0.423956 0.416487 0.402113 0.402113 0.416487 0.409996 0.396564 0.438458 0.453820 0.445639 0.431186 0.431186 0.445639 0.437578 0.423956 0.423956 0.437578 0.429373 0.416487 0.416487 0.429373 0.422124 0.409996 Y 0.432618 0.440399 0.423386 0.416097 0.416097 0.423386 0.406472 0.399525 0.399525 0.406472 0.389001 0.382156 0.382156 0.389001 0.373814 0.367284 0.440399 0.445980 0.428680 0.423386 0.423386 0.428680 0.411632 0.406472 0.406472 0.411632 0.394281 0.389001 0.389001 0.394281 0.378952 0.373814 Typical CCT (K) 3375 Bin Code NM X 0.453820 0.470507 0.461404 0.445639 0.445639 0.461404 0.452512 0.437578 0.437578 0.452512 0.443600 0.429373 0.429373 0.443600 0.435591 0.422124 0.470507 0.486648 0.476733 0.461404 0.461404 0.476733 0.467132 0.452512 0.452512 0.467132 0.457663 0.443600 0.443600 0.457663 0.448994 0.435591 Y 0.445980 0.450832 0.433334 0.428680 0.428680 0.433334 0.416241 0.411632 0.411632 0.416241 0.399111 0.394281 0.394281 0.399111 0.383714 0.378952 0.450832 0.454191 0.436634 0.433334 0.433334 0.436634 0.419632 0.416241 0.416241 0.419632 0.402866 0.399111 0.399111 0.402866 0.387515 0.383714 Typical CCT (K) 2950 QN 3375 NN 2950 Q0 3375 N0 2950 QP 3375 NP 2950 PM 3150 MM 2760 PN 3150 MN 2760 P0 3150 M0 2760 PP 3150 MP 2760 Note for Table 12: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 30 Color Bins Green, Cyan and Blue LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Green Emitters Table 13. Bin Code 1 2 3 4 5 6 Minimum Dominant Wavelength (nm) 520 525 530 535 540 545 Maximum Dominant Wavelength (nm) 525 530 535 540 545 550 Dominant Wavelength Bin Structure for Cyan Emitters Table 14. Bin Code 1 2 3 4 5 6 Minimum Dominant Wavelength (nm) 490 495 500 505 510 515 Maximum Dominant Wavelength (nm) 495 500 505 510 515 520 Dominant Wavelength Bin Structure for Blue Emitters Table 15. Bin Code 1 2 3 4 5 6 Minimum Dominant Wavelength (nm) 460 465 470 475 480 485 Maximum Dominant Wavelength (nm) 465 470 475 480 485 490 Royal Blue Luxeon Rebel Emitters are tested and binned for peak wavelength. Peak Wavelength Bin Structure for Royal Blue Emitters Table 16. Bin Code 3 4 5 6 7 8 LUXEON Rebel Datasheet DS56 (7/07) Minimum Peak Wavelength (nm) 440 445 450 455 460 465 Maximum Peak Wavelength (nm) 445 450 455 460 465 470 31 Red, Red Orange and Amber LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Red Emitters Table 17. Bin Code 4 5 Minimum Dominant Wavelength (nm) 620.5 631.0 Maximum Dominant Wavelength (nm) 631.0 645.0 Dominant Wavelength Bin Structure for Red Orange Emitters Table 18. Bin Code 2 Minimum Dominant Wavelength (nm) 613.5 Maximum Dominant Wavelength (nm) 620.5 Dominant Wavelength Bin Structure for Amber Emitters Table 19. Amber Dominant Wavelength Bins Bin Code 1 2 4 6 7 Minimum Dominant Wavelength (nm) 584.5 587.0 589.5 592.0 594.5 Maximum Dominant Wavelength (nm) 587.0 589.5 592.0 594.5 597.0 Forward Voltage Bins Table 20 lists minimum and maximum VF bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 20. VF Bins Bin Code A B C D E F G Minimum Forward Voltage (V) 2.31 2.55 2.79 3.03 3.27 3.51 3.75 Maximum Forward Voltage (V) 2.55 2.79 3.03 3.27 3.51 3.75 3.99 LUXEON Rebel Datasheet DS56 (7/07) 32 Company Information Philips Lumileds Lighting Company is a world class supplier of Light Emitting Diodes (LEDs) and produces billions of LEDs annually. Philips Lumileds is a fully integrated supplier producing core LED material in all three base colors (red, green, blue) and white. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands as well as production capabilities in San Jose, Penang Malaysia and Singapore. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid state LED technology and the lighting world. Philips Lumileds technologies, LEDs and systems are enabling new applications and markets in the lighting world. Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or askluxeon@futureelectronics.com Europe: 00 800 443 88 873 or luxeon.europe@futureelectronics.com ©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or lumileds.asia@futureelectronics.com