L U M I N IS
1 2
Wall mount
Specification
ARGON
AR15W . AR15WL
3 White translucent conical housing 4
All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 1 - 11 ga. galvanized pressure mounting plate. 2 - Cast aluminum isolated ballast compartment. 3 - Cone shaped white translucent conical housing 4 - Cast aluminum sealed hinged glass lens frame, with perimeter memory retention embedded silicone gasket . 5 - Stainless steel recessed captive hexagonal cap screws. 6 - Tempered clear glass lens. 7 - Semi-specular partial down light reflector. AR15W: AR15WL: ASH: Regressed clear tempered glass lens. White translucent acrylic frosted conical dropped lens. Down light only. Low brightness full cut-off 20”ø aluminum shade. Compatible with AR15W-AR15WL
5 6
Hinged frame
7
For pole mounting, please refer to page 22
11 1/2” 7 1/2” 13 1/2” ASH: Optional 20”ø shade. Adaptable to AR15W & AR15WL
13 1/2”
17 1/2” 19 1/2” AR15WL Argon with conical lens
Photometry
Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com.
5 1/8”
90
3 1/2” AR15W Argon with conical lens
60 30
Certification
UL. Wet Location.
Mounting & E.P.A.
Max.weight: 21 lbs. EPA: 0.65 Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others ) additional separate mounting holes are provided with wall plate.
For options details and specifications, please refer to pages 22 - 41
Model#
Light source selection
MH (ED17) M50 M70 CF (Gx24q) Single lamp F157 F170 CF (Gx24q) Two lamp F226 F232 F242
Voltage
120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. H.I.D.
Finish
(Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT : Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color CP:
Options
Accessories Pole mounting adaptor. see page 22 Electrical Fuse 120/277V photo cell 347V photo cell 1 lamp (26/32/42W) EM battery.
AR15W AR15WL
HPS (ED17) H50 H70
208 V 240 V Note: 50W.HPS is available with 277 V 120/277V only. 347 V COMP. FLUO. Smart ballast 120/277 347 V (To specify)
FS: PH1 : PH2 : EM42S:
Note: EM optional battery test switch and pilot lamp are installed remotely. (See page 72) Available for wall mounted luminaires only
(Lamps by others)
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept.2006 Rev: Feb.2007
Page 21
L U M IN I S
Argon with flat lens
Pole mount attachments
Argon with conical lens
ARGON
With top glow ring
Argon with lens/shade combination
5”
2 5/8” 23”
2 5/8”
21 1/2”
AR10-CP
With top glow ring
AR10L-CP
AR10-ASH-CP
(With flat lens & shade.)
With top glow ring
AR10WL-ASH-CP
(With conical lens & shade.)
Pole adaptor is factory designed and made to fit with 4” or 5” dia. pole. Please refer to page 145 for additional details.
With Closed top
AR12-CP
AR12L-CP
With Closed top
AR12-ASH-CP
(With flat lens & shade.)
With Closed top
AR12L-ASH-CP
(With conical lens & shade.)
White translucent diffuser.
AR15-CP
White translucent diffuser.
AR15L-CP
White translucent diffuser.
AR15-ASH-CP
(With flat lens & shade.)
AR15L-ASH-CP
(With conical lens & shade.)
Mounting: Installation: Connects to a standard 4” or 5” O.Dia. x .125” thick wall pole
General notes :
Please refer to corresponding specification sheet for desired luminaire detail.
RA3 and RA4 Options are available with a single lamp installation
AR10-CP AR12-CP AR15-CP EPA .93
AR10L-CP AR12L-CP AR15L-CP .95
AR10-ASH-CP AR12-ASH-CP AR15-ASH-CP .95
AR10L-ASH-CP AR12L-ASH-CP AR15L-ASH-CP 1.27
Compatible poles listing.
4”O.D. 5”O.D. 4”O.D.
Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft
PAA410-CP PAA510-CP PXD10-CP PAA412-CP PAA512-CP PXD12-CP PAA414-CP PAA514-CP PXD14-CP PAA416-CP PAA516-CP PXD16-CP PAA418-CP PAA518-CP PXD18-CP PAA420-CP PAA520-CP PXD20-CP For poles details and specification, please refer to pages 140 to 144
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept.2006 Rev: Feb.2007
Page 22
很抱歉,暂时无法提供与“AR15WL”相匹配的价格&库存,您可以联系我们找货
免费人工找货