L U M I N IS
Specification
SYRIOS
W1222
All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test.
1 2 3 4 5
Alternate model with internal lamp adjustability allowing a 358º rotation X 30º tilt from vertical position with P39/P70/P100 H.I.D. sources.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gask et with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 12345Cast aluminum ballast housing. Cast aluminum modular optical light chamber. Semi-specular aluminum reflector. Clear tempered lens. Cast aluminum sealed lens frame.
Note: W1222 series is a modular luminaire offered with an array of standard or optional attachments, to meet multiple installation requirements. Please specify desired mounting accessory with model number. (Refer to page127)
W1222S : 18” dia. Full cutoff aluminum shade. W1222L : Set of three cast aluminum louver blades.
Photometry
14 1/2” 20” 18 1/2”
9 1/2”
18”
90
Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com.
W1222
EPA: 0.37
W1222S
EPA: 0.48
W1222L
EPA: 0.41
60 30
Certification
UL. Wet Location.
Mounting
Max. weight: 27 lbs.
Please refer to pages 127 &128 for additional details. Options
STM60: STM80: STC: SW45: EM42S: FS: PH1 : PH2 : QS: QRS: Mounting 60” lg.suspension stem. 80” lg.suspension stem. Safety cable. 45º hang straight swivel. Electrical 1 lamp (26/32/42W) Fuse 120/277V photo cell. 347V photo cell. Standby lamp socket. H.I.D. lamp restrike
Model#
Mounting
Light source selection
MH (ED17) CF (Gx24q) Single lamp F142 F157 CF (Gx24q) Two lamp F226 F232
Voltage
120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. H.I.D. 208 V 240 V 277 V 347 V Compact fluorescent smart ballast 120/277 347 V (To specify)
Finish
(Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT : Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color
W1222 W1222S W1222L
APA2 ACA2 ACW2 APS2 APC2 S T2 W2
M70 M100 M150 M175 HPS (ED17) H70 H100 H150 PAR lamps
PH39 (PAR20) PH70 (PAR30L) PH100 (PAR38)
Adjustable lamps
EM42S option is available with -S / -W2 / ACW2 / -T Mounting styles. EM optional battery test switch and pilot lamp are installed remotely. (See page 103)
(Lamps by others)
M150- M175 & H150 are only available with dedicated 5” dia. poles Ballast located in line at post top, with easily removable tray.
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 119
L U M I N IS
36” 14” 14 1/2”
Mounting attachments for W1222 Series
20 1/2”
SYRIOS
23”
28 1/2”
6” 9 1/2” 21 1/2”
-S 15º swivel ceiling mount with 5/8”
dia.X36”lg. aluminum stem. Luminaire top adaptor allowing to cut stem to length on site.(Mounts over a standard 4" octagonal box with 3 1/2" C/C holes) 4 1/2” 17 3/4”
-W2 -1 1/2” Dia. shepherd
aluminum arm wall mount, with a cast aluminum wall cover and galvanized steel mounting plate.
-APA2 -1 1/2” Dia.
shepherd aluminum side pole mount. (EPA:1.12)
-APS -1 1/2” Dia.
shepherd aluminum post top mount, with a cast aluminum tenon to fit with a 3 3/4” I.D. pole (EPA:1.17)
15”
14”
29”
14 1/2” Power supply 29 3/4” 6 1/2” Power supply
-ACA2 -1” x 3” extruded
aluminum Davit arm pole mounting adaptor designed to fit with 4 to 5” dia. poles.1/2” dia.X 45º standard natural stainless steel rod support (EPA:1.58)
-ACW2 -1” x 3” extruded
aluminum Davit arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia.X 45º standard natural stainless steel rod support.
-T2 -1” x 3” extruded
aluminum wall mounting straight adaptor with cast aluminum cover and galvanized steel mounting plate.
-APC2 -1” x 3” extruded
aluminum side pole mounting straight adaptor (EPA:1.3)
Compatible poles listing.
Post side mount with APA2 attachment accessory
Mounting style 4”O.D. PAA410-APA PAA412-APA PAA414-APA PAA416-APA PAA418-APA PAA420-APA PAA410-APC PAA412-APC PAA414-APC PAA416-APC PAA418-APC PAA420-APC PAA pole style PAA410-A PAA412-A PAA414-A PAA416-A PAA418-A PAA420-A PAA414-ACA PAA416-ACA PAA418-ACA PAA420-ACA 5”O.D. PAA510-APA PAA512-APA PAA514-APA PAA516-APA PAA518-APA PAA520-APA PAA510-APC PAA512-APC PAA514-APC PAA516-APC PAA518-APC PAA520-APC 4”O.D. PCA12-APA PCA14-APA PCA16-APA 4”O.D. PXD10-APA PXD12-APA PXD14-APA PXD16-APA PXD18-APA PXD20-APA PXD10-APC PXD12-APC PXD14-APC PXD16-APC PXD18-APC PXD20-APC Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft
* Note: 36” extension with ACA2 attachment 24” extension with APA2 & APC2 attachment
Post side mount with APC2 attachment accessory
OAL pole height 12- 14 or 16ft. Post top mount PCA12-APC PCA14-APC PCA16-APC
* Note
4” PXD pole style PCA pole style PCA pole style
Post side mount with APS attachment accessory
PAA510-A1 PAA512-A1 PAA514-A1 PAA516-A1 PAA518-A1 PAA520-A1 PAA514-ACA PAA516-ACA PAA518-ACA PAA520-ACA PCA10-A PCA12-A PCA14-A PCA16-A PXD10-A PXD12-A PXD14-A PXD16-A PXD18-A PXD20-A PXD14-ACA PXD16-ACA PXD18-ACA PXD20-ACA 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft 14 ft 16 ft 18 ft 20 ft
60”
Post side mount with ACA2 attachment accessory
PCA14-ACA PCA16-ACA
For poles details and specification, please refer to pages 140 to 144
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
Page 127
L U M IN I S
Slope ceiling adaptor Option: SW45
45º hang straight ball swivel for 5/8” dia. suspension stem.
Optional accessories
Longer suspension stem * STA
option for: W1250S
SYRIOS
60” lg.X5/8” O.D. suspension stem. 80” lg. X5/8” O.D. suspension stem.
Option
STM60 STM80 STA60: STA80:
Option: SB45 SW45 SB45
45º hang straight ball swivel for 5/8” dia. suspension stem. with adaptor plate for W1250S
Stems can be cut on site and rethreaded externally (Tap size 1/4 IPS / 1/4-18)
For other factory cut to size length add suffix -STM with desired length to catalog# max.120”
Suspension power cord
Note: cable size and type may change at factory discretion upon availability, to accommodate required wiring with selected option.
Option: SPW (White) SPB (Black)
3/18 X 36”lg. power cord with adjustable aircraft cable. SPB Black power cable only with options EM42 EM242 QS
Spiral suspension power cord Option: TCW (White) TCB (Black)
3/18 Spiral power cord Max. 277V Standard extended length: 3ft. Not applicable when using options EM42 EM242 QS
Safety suspension cable Option: STC
Safety aircraft suspension cable, for applications with earthquake regulations. Cables extends 18” beyond canopy. (Secured to building structure)
Overall length change: Option: STM2
STM2Change total suspension length fro standard length. Specify desired length in inches. EX: STM2-72”
Quartz lamp restrike Option: QRS
Quartz restrike standby lamp kit. When power failure is restored, it will energize temporary Quartz lamp with progressive dimming until full H.I.D light output is produced. max.100w DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps.
Quartz lamp restrike Option: QS
Quartz lamp socket for external 120V emergency power input. Separate 120V dedicated wiring is included. max.100 W DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps.
Emergency battery back-up EM42 / EM42S
One lamp: 26w: 450 Lmns.. 32w: 575 Lmns. 42w: 750 Lmns. Time: 90 Mnts -120/277V / T 0º C EM Ballast wiring diagram for 120V factory connection.
COM HOT
EM42 wiring
EM42S wiring
BLK WHT
Note:
AC ballast
WHT
EM ballast
EM42 option is supplied with integral test switch and pilot light. EM42S is supplied with additional wiring for external remotely installed test switch and pilot light.
Note: Use of Emergency battery, requires periodic and regular testing to ensure correct operation. (please refer to manufacturer’s instructions. For 57w & 70w: (Remote installation only) Consult factory
Black/120V (Factory wired) Orange/277V (Cap unused lead.)
Single pole test switch (Breaking the connection)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 JAN.2008
Page 128
很抱歉,暂时无法提供与“W1222”相匹配的价格&库存,您可以联系我们找货
免费人工找货