A3010

A3010 Cascadable Amplifier 10 kHz to 2500 MHz Features • • • • • GAIN: 9.5 dB (TYP.) DC COUPLING REQUIRED* +/- 1 dB GAIN FLATNESS HIGH DRIVER OUTPUT LEVEL: +18 dBm INPUT/OUTPUT MATCH: < 2.0:1 (TYP.) Rev. V4 Product Image Description The A3010 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An RF choke is used for DC power supply decoupling. A voltage sequencing circuit can be used to ensure the negative voltage (-5.2 Vdc) is turned on first and turned off last during normal operation. Reference the application circuit on page 2. The TO-8 package is hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number A3010 CA3010 ** Package TO-8 SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50Ω, VCC = +12 / -5.2 VDC Typical Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 VSWR Input / Output (max) DC Voltage - Positive DC Current - Positive (max) DC Voltage - Negative DC Current - Negative (max) Volts mA Volts mA Absolute Maximum Ratings Parameter Storage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.) Peak Power (3 µsec max.) “S” Series Burn-In Temperature (case) Guaranteed 0º to 50ºC -54º to +85ºC** 0.010-2500 8.5 ±1.0 0.010-2500 8.0 ±1.2 Units MHz dB dB dB dB dBm dBm Absolute Maximum -62ºC to +125ºC 125ºC +18 V +17 dBm 100 mW 0.5 W 125ºC 25ºC 0.010-2500 9.5 ±0.9 16 4.5 19.0 +35 5.5 17.0 6.0 16.5 2.0:1 / 2.0:1 2.2:1 / 2.2:1 +12 155 -5.2 15 +12 160 -5.2 20 2.3:1 / 2.3:1 +12 165 -5.2 25 Thermal Data: VCC = +12/-5.2 VDC Parameter Thermal Resistance θjc Transistor Power Dissipation Pd Junction Temperature Rise Above Case Tjc Rating 105.6ºC/W 0.55 W 58.1ºC * Model A3010 requires external Input and output DC blocking capacitors (0.36 µF nominal) on the circuit board transmission lines for operation. Model CA3010 has internal DC blocking capacitors integrated in the design, so external blocking capacitors are not required. ** Over temperature performance limits for part number CA3010, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. A3010 Cascadable Amplifier 10 kHz to 2500 MHz Typical Performance Curves at +25°C Outline Drawing: TO-8 * Rev. V4 - DC Voltage + DC Voltage WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * + DC Voltage - DC Voltage WEIGHT: 19 grams (0.67 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Application Sequencing Circuit Block Diagram 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.