AMC-123

AM-123 / AMC-123 High Performance Amplifier, 10 dB Gain 5 - 500 MHz Features • 3.5 dB Typical Midband Noise Figure • +42 dBm Typical Midband Intercept Rev. V3 FP-7 Description M/A-COM’s AM-123 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise minimized. The ground plane on the PC board should be configured to remove heat from under the package AM-123 is ideally suited for use where a high intercept, high reliability amplifier is required. C-32 Absolute Maximum Ratings 1 Parameter Max. Input Power Vbias Operating Temperature Storage Temperature Absolute Maximum +23 dBm +15.75 V -55°C to +85°C -65°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM-123 / AMC-123 High Performance Amplifier, 10 dB Gain 5 - 500 MHz Electrical Specifications: 2,3 TA = -55°C to +85°C Case Temperature Parameter Gain Rev. V3 Test Conditions @+25oC Frequency 50 MHz Units dB Min. 9.4 Typ. 10.0 Max. 10.6 Frequency Response Gain Variation with Temperature 1 dB Compression Noise Figure — — Output Power — 5 - 500 MHz 5 - 500 MHz 5 - 500 MHz 10 - 300 MHz 5 - 500 MHz 10 - 300 MHz 5 - 500 MHz 5 - 500 MHz 10 - 400 MHz 5 - 500 MHz 10 - 300 MHz 5 - 500 MHz 10 - 300 MHz — — — dB dB dBm dBm dB dB dB Ratio Ratio dBm dBm dBm dBm VDC mA mW — — +16 +19 — — — — — +33 +40 +22 +32 +14.5 — — — — — — — — -18 — — — — — — +15.0 62 930 ±0.7 ±1.0 — — 7.5 5.5 -15 2.5:1 2:1 — — — — +15.5 75 — Reverse Transmission VSWR — — Output IP2 Output IP3 Vbias Ibias Power Dissipation Two-Tone inputs up to +10 dBm Two-Tone inputs up to +10 dBm — Vbias = +15.0 VDC @ +15 V Bias 2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance. 3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1 W must be provided in use. S-Parameter Data Frequency (MHz) 5 10 20 50 100 200 300 400 500 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. S11 MAG/ANG 0.21/-69.9 0.11/-81.5 0.08/-88.5 0.06/-108.4 0.05/-122.8 0.05/-141.8 0.07/-155.4 0.15/177.2 0.20/151.3 S21 MAG/ANG 3.15/-158.8 3.17/-172.2 3.18/-178.4 3.17/162.9 3.14/142.8 3.11/104.8 3.09/66.9 3.08/26.7 3.05/-21.9 S12 MAG/ANG 0.11/171.3 0.11/175.0 0.12/171.7 0.13/159.9 0.13/141.4 0.13/102.1 0.12/64.9 0.11/27.3 0.09/-20.9 S22 MAG/ANG 0.15/92.8 0.06/116.1 0.04/139.8 0.03/174.7 0.04/-163.9 0.04/-119.4 0.14/-114.6 0.22/-153.2 0.25/83.4 AM-123 / AMC-123 High Performance Amplifier, 10 dB Gain 5 - 500 MHz Typical Performance Curves Rev. V3 Ordering Information Part Number AM-123 PIN AMC-123 SMA Package Flatpack Connectorized Pin Configuration Part No. 1 2 3 4 Function RF OUT GND GND DC IN Pin No. 5 6 7 8 Function RF IN GND GND DC IN 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.