AT10-0019-TB

AT10-0019 PIN Diode Based Variable Attenuator, 50 - 1000 MHz Features • • • • • • High Dynamic Range: 42dB Typical Flat Attenuation vs. Frequency High P1dB Compression Operates on a Single +5V Supply: 50 Ohm Nominal Impedance SOW-16 Package Rev. V6 Functional Schematic Description M/A-COM's AT10-0019 is a Voltage Controlled PIN diode based π attenuator packaged in a low cost, 16 lead wide body plastic SMT package. The PIN diode design makes this part well suited for applications where low distortion or high linear operating power levels are required. These attenuators are ideal for gain control in multi-channel digital communications systems. Ordering Information Part Number AT10-0019 AT10-0019TR AT10-0019-TB Pin Configuration Pin No. Package Bulk Packaging 1000 piece reel Sample Test Board 1 2 3 4 5 6 7 8 Function GND RF IN GND GND GND GND V SUPPLY GND Pin No. 9 10 11 12 13 14 15 16 Function GND V CONTROL GND GND GND GND RF OUT GND Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT10-0019 PIN Diode Based Variable Attenuator, 50 - 1000 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω1 Parameter Insertion Loss Dynamic Range Attenuation Flatness VSWR Trise, Tfall Ton, Toff Transients 1 dB Compression Input IP3 VCC I CC Control Current 1. Rev. V6 Test Conditions Vcont.: +10 V Vcont.: 0 V Attenuation: 0 to 20 dB Attenuation: 20 to 30 dB Vcont.: 0 - 10V 10%/90%, 90%/10% 50% Cntl to 90%/10% RF In-band Vcont.: 0 - 10V Frequency 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz 50 - 1000 MHz — Units dB dB dB dB Ratio µs µs mV dBm dBm dBm dBm dBm V mA mA Min — 33 — — — — — — 10 17 21 24 34 +4.75 — — Typ 2.4 42 1.0 1.5 1.7:1 10 15 150 13 20 24 27 37 +5.0 2 2.7 Max 2.8 — 1.5 2.0 2.1:1 20 25 250 — — — — — +5.25 2.5 3.5 100 MHz 500 MHz 1000 MHz 100 MHz 1000 MHz — DC DC Vcont.: 0 - 10V Two-tone inputs up to +10 dBm — VCC = 5.25 V — Unit requires external .01 µF DC Blocks on RF lines. Absolute Maximum Ratings 2,3 Parameter Max. Input Power 50 - 500 MHz 500 - 1000 MHz Voltages VCC Control Voltage Operating Temperature Storage Temperature Absolute Maximum +24 dBm +30 dBm -1 V to +7.0 V -1 V to +15 V -40°C to +85°C -65°C to +125°C MAAV-007088-000100 PAD LAYOUT Pad Layout 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Dimensions are in inches All undefined pins are connected to ground Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT10-0019 PIN Diode Based Variable Attenuator, 50 - 1000 MHz Rev. V6 Typical Performance Curves Attenuation vs. Frequency @ Control Voltage = 0V Attenuation vs. Control Voltage @ 500 MHz -30 -5 Attenuation (dB) Attenuation (dB) -35 -40 -45 -50 -55 - 60 50 335 620 905 -15 -25 -35 -45 0 1 2 3 4 5 6 7 8 9 10 Fre que ncy (MHz ) Control Voltage (V) Insertion Loss vs. Frequency @ Control Voltage = 10V 0.0 -0.5 IL (dB) -1.0 -1.5 -2.0 -2.5 50 335 620 905 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT10-0019 PIN Diode Based Variable Attenuator, 50 - 1000 MHz SOW-16† Rev. V6 † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.