AT65-0009TR

AT65-0009 Voltage Variable Attenuator 824 - 960 MHz Features • • • • • • 25 dB Attenuation Range High IP3 Excellent Linearity Performance Low Cost/High Performance 50 Ohm Nominal Impedance SOT-25 Package Rev. V3 Functional Diagram and Bias Circuitry GND GND Description M/A-COM’s AT65-0009 is an integrated voltage variable attenuator containing two PIN diodes and a passive glass quadrature hybrid. This device is packaged in a 5 leaded SOT plastic surface mount package. Maximum attenuation is typically achieved at 3.5 V bias using the suggested bias circuit. The AT65-0009 is ideally suited for GSM communication applications requiring variable attenuation in the 824 to 960 MHz bandwidth. PIN 1 C5 L1 C1 RF IN C3 GND PIN 3 C6 L2 C4 C2 RF OUT R1 VB Pin Configuration Pin No. 1 2 3 Function RFIN, VB GND RFOUT, VB GND GND Ordering Information Part Number AT65-0009 AT65-0009TR AT65-0009-TB 4 5 Package Bulk Packaging 1000 piece reel Sample Test Board External Circuitry Parts 1 Part C1 C2 C3 C4 L1 L2 R1 C52 C62 Value 390 pF 390 pF 390 pF 390 pF 180 nH 180 nH 10 KOhm 1.5 pF 1.5 pF Purpose DC Block DC Block By-pass By-pass RF Choke RF Choke Current Limiting RF Tune RF Tune Note: Reference Application Note M513 for reel size information. 1. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.). 2. See Application Note MA-C-05010008A for external tuning capacitor values to suit specific Communication Bandwidths. Insertion Loss will vary depending on tuning capacitor value chosen. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0009 Voltage Variable Attenuator 824 - 960 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω, F = 824 to 960 MHz Parameter Insertion Loss VSWR Attenuation Flatness vs. Frequency Switching Speed Input IP3 Input IP2 Attenuation 0 - 10 dB 0 - 20 dB 0 - 30 dB 50% control to 90%/10% RF Two Tones 900 MHz, 905 MHz, +5 dBm VB = 0 V Two Tones 900 MHz, 905 MHz, +5 dBm VB = 0 V IB = 0.30 to 0.45 mA Rev. V3 Test Conditions VB = 0 V Units dB Ratio dB dB dB usec dBm dBm dB Min — — — — — — — — 25 Typ 1.7 1.7 1.3 1.3 2.5 7.0 40 34 28 Max 2.1 2.2 — — — — — — — Absolute Maximum Ratings 3,4 Parameter Max Input Power Operating Voltage Operating Temperature Storage Temperature 3. 4. Absolute Maximum +27 dBm +5 V -40°C to +85°C -65°C to +125°C Recommended PCB Configuration5 Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 5. Circuit Material = FR-406, 0.031 inches thick. Line Width = 0.025 inches, Line Spacing = 0.0056 inches. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0009 Voltage Variable Attenuator 824 - 960 MHz Typical Performance Curves Attenuation vs. Voltage with 1.5 pF Tuning Cap @ +25°C 35 Rev. V3 Attenuation vs. Freq. With 1.5 pF Tuning Cap @ +25°C Attenuatio n (dB) 30 25 20 15 10 5 0 0.0 1.0 2.0 3.0 4.0 35 Attenuation (dB) 30 25 20 15 10 5 0 820 840 860 880 900 920 940 960 VB (Volts) Fre que ncy (MHz) Attenuation vs. Voltage with 1.5 pF Tuning Cap @ +85°C 35 Attenuation vs. Freq. With 1.5 pF Tuning Cap @ +85°C A ttenua tio n (dB) 30 25 35 30 Attenuation (dB) 1.0 2.0 3.0 4.0 20 15 10 5 0 0.0 25 20 15 10 5 0 820 VB (Volts) 840 860 880 900 920 940 960 Frequency (MHz) Attenuation vs. Voltage with 1.5 pF Tuning Cap @ -40°C 35 Attenuation vs. Freq. With 1.5 pF Tuning Cap @ -40°C 35 30 Attenua tio n (dB) 30 Attenuation (dB) 1.0 2.0 3.0 4.0 25 20 15 10 5 0 0.0 25 20 15 10 5 0 820 840 860 880 900 920 940 960 VB (Volts) 3 Fre que ncy (MHz ) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0009 Voltage Variable Attenuator 824 - 960 MHz Typical Performance Curves VSWR vs. Freq. With 1.5 pF Tuning Cap @ +25°C IL 2.5 5d B 10 d B 16 d B 3 0 dB Rev. V3 Loss vs. Frequency @ +25°C No Tuning Cap (See Note 2) 2.0 1.8 1.6 1.4 1.2 1.0 2.0 1.5 1.0 820 Insertion Loss (dB) VSWR 855 890 925 960 820 840 860 880 900 920 940 960 Fre que ncy (MHz ) Frequency (MHz) VSWR vs. Freq. With 1.5 pF Tuning Cap @ +85°C Loss vs. Frequency @ +85°C No Tuning Cap (See Note 2) 2.0 IL 2.5 5d B 10 d B 16 d B 3 0 dB Insertion Loss (dB) 1.8 1.6 1.4 1.2 1.0 2.0 VSWR 1.5 1.0 820 820 840 860 880 900 920 940 960 855 890 925 960 Frequency (MHz) Frequency (MHz) VSWR vs. Freq. With 1.5 pF Tuning Cap @ -40°C IL 2.5 5d B 10 d B 16 d B and 3 0 d B Loss vs. Frequency @ -40°C No Tuning Cap (See Note 2) 2.0 Insertion Loss (dB) 1 .8 1 .6 1 .4 1 .2 1 .0 2.0 VSWR 1.5 1.0 820 855 890 925 960 820 840 860 880 900 920 940 960 Frequency (MHz) 4 Frequency (MHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AT65-0009 Voltage Variable Attenuator 824 - 960 MHz SOT-25† Rev. V3 † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.