CH-134PIN

CH- / CHS-134 Bi-Directional Couplers, 10 - 500 MHz Features n n Rev. V3 FP-2 (CH-134) Constant Coupling - Within ± 0.5 dB Max. MIL-STD-202 Screening Available Description Bi-Directional Couplers offer the ability to couple the power in two directions while maintaining directivity. SF-1 (CHS-134) Pin Configuration (CH-134) Pin No. 1 2 3 4 Function C GND GND B Pin No. 5 6 7 8 Function A GND GND D Pin Configuration (CHS-134) Pin No. 1 2 Function C B Pin No. 3 4 Function A D 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice. CH- / CHS-134 Bi-Directional Couplers, 10 - 500 MHz Electrical Specifications1: TA = -55°C to +85°C Parameter Coupling Coupling Flatness VSWR Directivity Main Line Loss Input Power 2 Rev. V3 Test Conditions Input to Output — All Ports Both Directions — — Frequency — — 10 - 500 MHz 25 - 200 MHz — — — Units dB dB Ratio Ratio dB dB Watt Min 10.1 — — — 20 — — Typ 10.8 — — — — — — Max 11.5 ± 0.5 1.8:1 1.5:1 — 1.6 1.0 1. All specifications apply with 50 ohm source and load impedance. 2. Includes theoretical power split. This product contains elements protected by United States Patent umber 3,426,298. Functional Diagram (CH-134) 4 8 Functional Diagram (CHS-134) 2 4 0° 1 Case P2, P3, P6 and P7 Ground 180° 5 1 0° 180° 3 Case Ground 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice. CH- / CHS-134 Bi-Directional Couplers, 10 - 500 MHz Typical Performance Curves Rev. V3 Main Line Loss Main Line Loss (dB) Above 0.46 dB Power Split 1.50 50 Directivity 1.00 Directivity (dB) 5 10 20 50 100 200 300 400 500 40 0.50 30 0 .00 20 5 10 20 50 100 200 300 400 500 F re que nc y ( M H z) F re que nc y ( M H z) VSWR 1.80 Coupling 1.80 1.60 1.60 VSWR 1.40 VSWR 5 10 20 50 100 200 300 400 500 1.40 1.20 1.20 1.00 1.00 5 10 20 50 100 200 300 400 500 F re que nc y ( G H z) F re que nc y ( G H z) Ordering Information Part Number CH-134 PIN CHS-134 PIN Package FP-2 SF-1 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 considering for development. Performance is based on target specifications, simulated results, and/or prototype • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make not guaranteed. changes to the product(s) or information contained herein without notice.