CH-140PIN

CH-140PIN

  • 厂商:

    MA-COM

  • 封装:

  • 描述:

    CH-140PIN - 20 dB, Directional Coupler, 5 - 1000 MHz - M/A-COM Technology Solutions, Inc.

  • 详情介绍
  • 数据手册
  • 价格&库存
CH-140PIN 数据手册
CH-140 20 dB, Directional Coupler, 5 - 1000 MHz Features • • • • Broadband Flat Coupling 0.3 dB Typical Insertion Loss 30 dB Typical Directivity MIL-STD-883 Screening Available Rev. V4 FP-2 Description Directional couplers offer the ability to couple the power in one direction. Pin Configuration Pin No. 1 2 3 4 Function C GND GND GND Pin No. 5 6 7 8 Function A GND GND D Electrical Specifications1: TA = -55°C to +85°C Parameter Coupling Coupling Flatness VSWR Directivity Main Line Loss 2 Input Power Internal Power Dissipation Test Conditions Input to Output — All Ports Both Directions — — — 5 - 800 MHz 800 - 1000 MHz — — — Frequency — — Units dB dB Ratio dB dB dB Watt Watt Min 18.75 — — 20 17 — — — Typ 19.75 — — — — — — — Max 20.75 ± 0.5 1.35:1 — — 0.75 3.0 0.25 1. All specifications apply with 50 ohm source and load impedance. 2. Includes theoretical power split. This product contains elements protected by United States Patent umber 3,426,298. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. CH-140 20 dB, Directional Coupler, 5 - 1000 MHz Functional Diagram D Rev. V4 Ordering Information Part Number CH-140 PIN Package FP-2 0° C 180° A Typical Performance Curves Main Line Loss Directivity 1.00 50 Main Line Loss (dB) Above 0.46 dB Power Split 0.75 40 Directivity (dB) 0.50 30 0.25 20 0 .00 5 10 50 100 500 1000 1250 1500 10 5 10 50 100 500 1000 1250 1500 F requency (M H z) F requency (M H z) VSWR Coupling 1.2 20.5 1.1 Coupling dB Reference to Input VSWR 20 1 5 10 50 100 500 1000 1250 1500 19.5 5 10 50 100 500 1000 1250 1500 F re que nc y ( G H z) F re que nc y ( M H z) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.
CH-140PIN
1. 物料型号:CH-140 PIN,封装类型为FP-2。

2. 器件简介:该器件是一个20 dB的方向耦合器,工作频率范围为5 - 1000 MHz。它可以在一个方向上耦合功率。这款产品通过了MIL-STD-883标准的筛选,并具有宽带平坦耦合特性和0.3 dB的典型插入损耗以及30 dB的典型直接性。

3. 引脚分配: - 1号引脚:C(信号输出) - 2号引脚:GND(地) - 3号引脚:GND(地) - 4号引脚:GND(地) - 5号引脚:A(输入) - 6号引脚:GND(地) - 7号引脚:GND(地) - 8号引脚:D(信号输出)

4. 参数特性: - 耦合度:输入到输出的耦合度为18.75 dB至20.75 dB。 - 耦合平坦度:±0.5 dB。 - 驻波比(VSWR):所有端口的驻波比为1.10:1至1.35:1。 - 直接性:5 - 800 MHz时为20 dB,800 - 1000 MHz时为17 dB。 - 主线损耗:0.75 dB。 - 输入功率:最高3.0瓦特。 - 内部功率耗散:1瓦特至0.25瓦特。

5. 功能详解:方向耦合器的功能是在一个方向上耦合功率,同时保持较低的插入损耗和高直接性,适用于需要信号检测和监控的应用。

6. 应用信息:该方向耦合器适用于需要信号分离和监测的场合,如无线通信系统、测试和测量设备等。

7. 封装信息:该器件的封装类型为FP-2。
CH-140PIN 价格&库存

很抱歉,暂时无法提供与“CH-140PIN”相匹配的价格&库存,您可以联系我们找货

免费人工找货